|
| 1 | Supply and erection of steel tubular pole 410-SP-29, 9 m long ,129 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45 cm above the ground level.(SIDC Sch. Er 2(a)-II) |
| 2 | Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 120 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee(3+2) Three year all type (including Damage & Theft) Repair & Maintenance & Extra Two Year Gaurantee). Catt. AA as per UPPWD Sch. No.1424 (Bajaj /Philips/Crompton/Wipro Make) |
| 3 | Supply & Fixing of 32 MM Dia 1.20 Mtr long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clamp etc |
| 4 | Supply & fixing of D clamp of size 50x6 mm flat iron on ST poles with nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623 |
| 5 | Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle, nuts etc. as pre UPPWD Sch. No. 621 |
| 6 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. |
| 7 | Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site byEngineer I/C as Per UPPWD sch No. 289(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 8 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507 (Polycab /KEI/ Havells/ Grandle/gloster Make) |
| 9 | Supply & laying 25 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(j) & 507 (Polycab /KEI/ Havells/ Grandle/gloster Make) |
| 10 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core |
| 11 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer-incharge as per UPPWD sch. no. 503 (k) 25 sq. mm 3.5 core |
| 12 | S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 13 | S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (f) 25 sq. mm |
| 14 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e-ii) (25 Amp. TPN) |
| 15 | Strengthening of ST/Octogonal pole/High Mast/Panel, foundation by providing new concreting including broken of weak foundation,excavation below upto Ground level,Surface finishing and painting with white cement and dark yellow colour cost of all material men and T&P complete in all respect rates |
| 16 | Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.24.20.(A) |
| 17 | Painting letters (Pole no.) 2.5 cm upto 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material men and T&P complete in all respect |
| 18 | Supply&Fixxing of of UPSIDA LOGO Plate (Retro-reflective) on High Mast including cost of clamp nut & bolts all material men and T&P complete in all respect |
| 19 | Tree Branches Triming for removing dark spots including cost of all material men and T&P complete in all respect |
| 20 | Charges for maintenance of entire electrical system of road lighting to cover general supervision for execution of work during the periodof AMC excluding the supply and fixing/installation of all materials. (01 Electrician & 01 Helper ) |
| 21 | Cost of all material, spares wire fuses, small accessories required for general maint., cleaning, oiling etc. to keep the entire installation in perfect working order during AMC period. (L.S. Basis) |
| 22 | S/F of Male -Female plug & socket for High Mast lighting system complete including all T&P men and material required for proper completion of work |
| 23 | S/F ofML-4 contactor MDS/L&T make complete including all T&P men and material required for proper completion of work.. |
| 24 | Supply & Fixing of 63 Amp 4 pole MCB complete in all respects as per UPPWD Schedule No. 1020(A) Cat-B |
| 25 | S/F of mounting time switch (timer Clock) L&T/MDS make complete including all T&P men and material required for proper completion of work. |
| 26 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 2 core cable of 1100 v grade complete. |
| 27 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 2 core cable of 1100 v grade complete. |
| 28 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 2 core cable of 1100 v grade complete. |
| 29 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete.. |
| 30 | Fabrication,Supply & Fixxing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone pad. |
| 31 | Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site reuimentt along with foundation bolts, nuts washers, anchor plates etc. complete in all respect as per UPPWD Sch. No. 652 (Bajaj, Philips, Crompton make and as E/I Approved Make) |
| 32 | Supply & fixing of factory wired integral LED floodlight luminaries with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respect as per UPPWD Sch. No. 1455Cat.-AA (Philips, Crompton,Bajaj, Wipro make) |
| 33 | Supply laying and Fixing 50 dia Gi pipe trench less Through manual Boggi including trenching 90 C.M. dccp and refilling etc.Ann-2 |
| 34 | Supply and erection of double pole 410-SP-56, 11 m long, 241 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level.(Job no - ED -SHC (200) Dt. 06.12.2022) |
| 35 | Supply and fixing of 11 KV Disc & Disc fittings complete.UPSIDC E03.08 |
| 36 | Supply and fixing of 11 KV pin insulator complete.UPSIDC E03.07 |
| 37 | Supply and fixing of 100 mm dia G.I.pipes B,class for climbing up the cable from ground to over head line including all accessories,materials,labours and T&P required for proper completion of work as per specification. |
| 38 | Supply and fixing of anticlimbing device fabricated from G.I. flat of 25 mmX6 mm size in a shape of ring of the pole size,having G.I.flat pointed fins of length 225 mm in 8 nos and also barbed wire in 200 mm length above the said ring including material. |
| 39 | Supply and fixing of danger board fabricated from 10 gauge M.S.sheet as per I.E.Rules. |
| 40 | Supply & fixing of straight MS Channel 100 x 50 mm 1.15 M long complete |
| 41 | Supply & fixing of clamp suitable for securing the above channel complete . |
| 42 | Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including material,men an T&P for proper completion of work.UPSIDC E.10.(a) |
| 43 | Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion.UPSIDC 35.28 |
| 44 | S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. |
| 45 | Supply, installation, testing & commissioning of outdoor type Al. wound oil cooled transformer of rating 25 KVA, 11/0.433 KV complete as per IS-1180-2014 Level-I as per approved list of UPPCL |
| 46 | Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel striparmoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506 & 507 (Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 47 | Supply & laying of 120 mm dia I/D HDPE DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. |
| 48 | S/F of Heat Shrinkable jointing kit suitable for XLPE 11 KV HT cable outdoor type including all materials, labour and T&P required for proper competion of work. 7x3 Sq.mm |
| 49 | Supply & laying of 90 mm dia I/D HDPE DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. |
| 50 | Supply & erection of stay of Composite mains for ST pole with GI anchor plate (152X152X6mm)stay rod (16mm dia X 1.85 m Iong),GI stay bow (16 mm dia rod,thimble,double stay tightener,clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand,over burnt brick ballast as per direction of engineer in charge complete in all respect. |
