tender for Khatoli Ahir,Repair Of Gad ... Repair Of Gad - Sub-Component Name: repair of gad NS-Mem: 35 wat LED surface pannal light fitting (Philips/ Bajaj Crompton Wpro GE/Havells Make ic all patty material required to complete the job in all respect HSR-Ham: 14.11 [Through Rate Providing and laying brick tiles over mumty roos, grouted with cement mortar 1:3 (1 cement: 3 the sandy mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement: 3 tine sand and finished neat: 1.With.common bumt clay non-modularbrickies of class designation 10 HSR-Bem: 9.17.1] [Tiyough Rate) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand 4 stone aggregate 10 inm and down gauge), including finishing with cement mortar 1:3.(1 cement: 3 fine sand) as per standard design 1. in 75x75 mm deep chase HS-Bem: 57.4] [Through Rate) Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineerin charge: 4. in cement mortar HSR-Bam: 15.14) [Through Rare] Demolishing brick the covering in terracing including stacking of seniiceable material and disposal of unserviceable material within 60 metres lead HSR-Item: 15.23.21 Through Rate Demolishing cement concrete manually by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge 2. Nominal concrete 1:2:4 or leaner mix fic equivalent design mix HSR-Hem: 15:29. 1) [Through Rate Dismansing doors, windows and clerestory windows (steel or wood) shutter including chowkhats, achitrave, holdfasts etc complete and stacking within 50 metres lead 1. Of ansa 3 sq. metres and below HSR-Item: 15-43.1 [Throogh Raio) Diamanting the work in floors and roots laid in coment mortar including stacking material within 50 metres lead. 1. For thickness of the 10mm to 25 mm HSR-Hem: [107) Through Rans Providing and laying of conglomerate floor 50mm thick coment concrete topping 1:2:4 HSR-Stem: [13.2) (Through Rate Providing and twing angle ron trames for doors, windows and ventilators of mild steel Angle sections of size 36x36x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x.5 mm flat pieces to the existing on frame or to the wall with dash fasonar, including toing of necessary butt hinges and screws and applying a priming coat of approved steel promer, all complete as per the direction of Engineer-In-charge SR-Stem: 13.3.2.1) (Though Providing and being pressed sheet door tames conforming to 15:4351, manufactured from commercial ined steel sheet of 2.0 min thickness, including hinges, jam, lock jamt, bead and required angle theeshold of mild steef angle of section 50x25 mm, or base bes of 2.00 mm, pressed mild steel welded or rigidly feed together by mechanical means, including MS. pressed butt hinges 2.5 mm thick with mortar guants, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primar after pre-treatment of the surface as directed by Engineer-in-charge: 2.1. Profile C. Fixing with adjustabile lugs with split and tail to each jamb HSR-Hem: 13.6.1][Through Rate Providing and sing thick MB sheet door with frame of 40x40x5 mm angle on and 3 mm M.S. gusset plates at the unctions and comers, all necessary fittings complete, including applying a priming coat of approved steel primer. 1. Using MS. angels 40x40x6 mm.for diagonal braces, HSR-Item: (10.58] [Through Rate) Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR-Item: [10.63.2] [Through Rate) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm HSR-Item: [22.1.2] [Through Rate) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 2. White vitreous chinaware Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap HSR-Item: [22.22.1] [Through Ratej Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests HSR-Item: [22.23.1] [Through Rate] Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. W.C. pan with ISI marked white solid plastic seat and lid HSR-Item: [22.25.2] [Through Rate) Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 2. One urinal basin with manually operated 5 litres PVC cistern and manually operated stop cock/ angle valve HSR-Item: [7.22.2] [Through Rate) Brick work with common bunt clay non- modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in: 2. Cement mortar 1:6 (1 cement:6 coarse sand)
