|
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in Charge.Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as spd & directed by Engr-in charge. |
| 2 | M&L for 9mm Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion complete all as specified and directed. |
| 3 | Providing & fixing false ceilingwith semi perforated 12mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm oflength 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i\"e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shapeleveladjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried outas per specifications, drawing and as per directions of the Engr-in-Charge. |
| 4 | Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section in framed work complete all as specified and directed. |
| 5 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and directed. |
| 6 | M&L for 2nd class soft wood fillets sectional area exc 3 and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed. |
| 7 | Taking down of chowkats with shutter (without taking of shutter from frame)n exc 1.5 Sqm each complete all as specified and directed. |
| 8 | Taking down of chowkats with shutter (without taking of shutter from frame)exc 1.5 Sqm but n exc 4.0 Sqm each complete all as specified and directed. |
| 9 | Taking down of Shutters of any description n, exc 1 sq. m each complete all as specified and as directed. |
| 10 | Taking down of Shutters of any description exc 1 sq. m but n,exc 2.00 Sqm each complete all as specified and as directed. |
| 11 | S&F 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 12 | S&F plain 2nd class hardwood 35mm thich framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 13 | S&F 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) completed all as specified and directed. |
| 14 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, & bottom rail, lock rail & bottom rail on either side & as gap insert for top rail & colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed |
| 15 | Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 16 | S&F 100mm size, butt hinges, cold rolled steel or stainless steel with screw, medium weight , ISI marked complete all as specified and directed. |
| 17 | S&F 75mm size, butt hinges, cold rolled steel or stainless steel with screw, medium weight , ISI marked complete all as specified and directed. |
| 18 | S&F 125mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 19 | S&F 100mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 20 | S&F 125mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 21 | S&F 100 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 22 | S&F 250mm long, Mild steel or stainless steel, sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 23 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primercomplete all as specified and directed. |
| 24 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 25 | S&F SDC Laminated flooring 8mm thick of any coloured manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base complete all as direceted by Engr-in-Charge. |
| 26 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering/wall complete all as specifed and directed. |
| 27 | M&L for 0.50mm thick CGI sheets fixed to wall/roof with two corrogations side lap, fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 28 | M&L for 0.50mm thick CGI sheets fixed to wall/roof with two corrogations side lap, fixed with L- type or J type or cranked hook bolts and washers but except sheeting complete all as specified and directed. |
| 29 | M&L 0.50 mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 30 | M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint all asspecified & directed by the Engr-in-Charge. |
| 31 | Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 32 | M&L for rendering 15 mm thickon fair faces ofbrick work orconcrete surfaces of walls in CM 1:4 and finished surface even and smooth (with out using extra cement) complete all as specified and directed. |
| 33 | M&L for preparation of new plaster surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 34 | Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 35 | M&L for preparation of old decorated surfaces of walls and applying one coat of cement based paintcomplete all asspecified and directed. |
| 36 | M&L for preparation of old decorated surfaces of walls and applying two coats of cement based paintcomplete all asspecified and directed. |
| 37 | M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices and applying one coat of oil bound distemper, white or tinted complete all asspecified and directed. |
| 38 | M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices and applying twocoats of oil bound distemper, white or tinted complete all asspecified and directed. |
| 39 | M&L forpreparation of old plaster surfaces, and applying one coat of white wash on walls complete all asspecified and directed. |
| 40 | M&L forpreparation of old plaster surfaces, and applying one coat of white wash on ceiling complete all asspecified and directed. |
| 41 | M&L for preparation of previously treated surfaces of any description over 10cm girth or width, not otherwise described of walls/concrete and plaster and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 42 | M&L for preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 43 | M&L for preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of varnish/french polish complete all as specified and directed. |
| 44 | M&L for preparation old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 45 | S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 46 | Hacking out old broken of glaass from wooden frame or stone concreteor brick with putty or fixed with nailcomplete allas specified and directed. |
| 47 | S&F sheet glass, ordinary quality, 3 mm thick, in squares not exc 0.50 Sqm in each pane and glazing with oil putty/wooden bedding complete all as specified and directed. |
| 48 | Taking upor down steel tubing and connections with all fittings for 15 mm bore GI tubing complete including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 49 | Refixing of old steel tubing including cleaning for refixing with all fittings and connections in new or old position to floor, wall or ceiling for 15mm bore GI tubing complete all as specified and directed. |
| 50 | S&F medium grade galvanised steel tubing with all fittings fixed to wall, ceiling or laid in floors for 15 mm bore GI tubing complete all as specified and directed. |
| 51 | S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 16 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specfied and directed. |
| 52 | Taking upor down steel tubing and connections with all fittings for 20 mm bore GI tubing complete including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 53 | Refixing of old steel tubing including cleaning for refixing with all fittings and connections in new or old position to floor, wall or ceiling for 20mm bore GI tubing complete all as specified and directed. |
| 54 | S&F medium grade galvanised steel tubing with all fittings fixed to wall, ceiling or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 55 | S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specfied and directed. |
| 56 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete all as specified and directed. |
| 57 | S&F in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets including waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 58 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white withfront or back inlet with integral \"foot rests including provn of lime concrete bedding including connections to \"flushing cistern/pipe including 100mm PVC \"P\" trap complete all as specified and directed. |
| 59 | S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat cover for pedestal pattern complete all as specfied and directed. |
| 60 | S&F in repairs Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed. |
| 61 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 62 | S&F in repair 15 mm bore bib tapbrass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe completeall as specified and directed. |
| 63 | S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed. |
| 64 | S&Fin repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 65 | S&F in repairs 15 mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 66 | S&F in repairs 20 mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 67 | S&Fin repairs 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin, sinks with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixedcomplete all as specified and directed. |
| 68 | S&F in repairs 15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends complete all as specified and directed. |
| 69 | S&F in repairs600mmX450mm bevelled edge mirror 5 mm thickof selected quality glass, mounted on 6mm thick AC building board or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer completeall as specified and directed. |
| 70 | S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 71 | S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws approximate size 160 x160x90mm complete all as specified and directed. |
| 72 | S&F in repair sheet glass shelf assembly/glass corner assembly set of three consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gurard and railing 60cm long complete all as specified and directed. |
| 73 | S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) (minium weight of 45gms) complete all as specified and directed. |
| 74 | S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. |
| 75 | S&F in repairs CP jet Spray 15mm dia fitted toEWC complete all as specified and directed. |
| 76 | Dismantling water tanks 500 Ltr capacity and removing to store complete all as specified and directed. |
| 77 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 78 | Dismantling water tanks 1000 Ltr capacity and removing to store complete all as specified and directed. |
| 79 | S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge. |
| 80 | Dewatering the contaminated/waste water from soakage well of size 1.8m dia & 3.00m deep pumping through mechanical means and dispose off therein open drain or low laying area incl cutting holes through slab/wall as required for inserting pipe and making good the same to match with existing surface complete all as specified and as directed by the Engr-in-Charge. (Note: Honey sucker machine, operator and Driver to be provided by the Contractor.Capacity of Honey sucker machine to be of min 5000 Ltr ) |
| 81 | M&L for cleaning septic tank of 25 users capacity and depth including inlet and outlet chambers, removing out all scum, silt residues both organic type after plugging the incoming sewage line, removing and depositing the waste material of sludge etc to a distance upto 100m and buried the same in ground by digging pit of suitable size and then cover with earth including removal or surplus soil if any complete all as specified and directed by Engr-In-Charge. (Note: Honey sucker machine, operator and Driver to be provided by the Contractor.Capacity of Honey sucker machine to be of min 5000 Ltr ) |
| 82 | Cleaning manhole of depth up to 1.5m and removing sludge and depositing the waste mateirial / sludge etc to distance outside cantt area and burried the same in the ground by digging of suitable size and then cover the earth including removal of surplus of soil if any complete all as specifed and as directed by the Engr-in-Charge and placing the manhole cover in the same position. (Note: Honey sucker machine, operator and Driver to be provided by the Contractor.Capacity of Honey sucker machine to be of min 5000 Ltr ) |
| 83 | M&L forCleaning of SGSW line/CI/PVC line up to 150mm internal dia by rodding from manhole for cleaning and well flushing after cleaning by taking off manhole cover and placing the same in position after cleaning and removing the waste material/sludge etc out of the garrison area complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L forCleaning of SGSW line/CI/PVC line up to 110/100mm internal dia by rodding from manhole for cleaning and well flushing after cleaning by taking off manhole cover and placing the same in position after cleaning and removing the waste material/sludge etc out of the garrison area complete all as specified and directed by Engr-in-Charge. |
| 85 | M&L for Cleaning of blocked/filled W.C/ floor/ nahani/ gully trap (any type) by heating pipe line with blow lamp/roding the CI/SWG pipe of any dia upto first manhole/gully trap after taking off the cover and placing the same in position after cleaning and removing the waste material/sludge etc complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F in repairs plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixedcomplete all as specfied and directed. |
| 87 | S&Fin repairs 32mm Dia PVC waste pipe with fly nut, coplingfor sinks/urinals or wash basins etc. complete all as specified and directed. |
| 88 | S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 89 | S&F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed. |
| 90 | S&F in repairs 40mm waste coupling of PTMT (half or full threaded) minium weight 45 gmsand fixed complete all as specified and as directed. |
| 91 | S&F in repairs CP brass Angle cock 15mm dia complete all as specified and directed. |
| 92 | S&F in repair of PVC/plastic lid/cover for 500/1000 Ltrs capacity rotational moulded polyethylene water storage tanks complete all as specified and directed. |
| 93 | Dismantling floor, hearth or wall tiling including cement mortarbedding (but not backing), removing serviceable tiles to store and rubbish off the premises completeall as specified and directed. |
| 94 | M&L forcoloured Non Skid Ceramic joint freetiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to matchincluding screed bed 15mm thick in CM 1:6complete all as specified and directed. |
| 95 | M&L for coloured light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed or bedding of cement mortar (1:6) complete all as specified and directed. |
| 96 | M&L for coloured Glazed ceramic tiles in vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including screed bed 10 mm thick in CM 1:4 complete all as specified and directed. |
| 97 | Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 98 | M&L for Providing precast reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc.) mangers, shelves and similar articles set in CM 1:6 complete all as specified and as directed. |
| 99 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 100 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc and n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed. |
| 101 | Returning fillingin incl spreading leveling,watering, and well, rammingin layer n.exc 25 cm in layers in hard/dense soil complete all as specified and directed. |
| 102 | Removingexcavated material (soil) to a distance n. exc50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed. |
| 103 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar internal dia of pipe 150 mm, complete all as specified and directed. |
| 104 | M&L Concrete bed 1:4:8 type D-2to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 150mm complete all as specified and as directed. |
| 105 | S&F 150mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified. |
| 106 | S&F 150mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 107 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar internal dia of pipe 75 mm, in any position complete all as specified and directed. |
| 108 | S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and as directed. |
| 109 | S&F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 110 | S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and directed. |
| 111 | Demolition of stone/PCC block/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 112 | M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 113 | M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessaryform work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I(2009) complete all as specified and as directed. |
| 114 | Rendering 10mm thick in CM 1:4 using water proofing compound as per manufacturer\"s instruction, finished even and smooth surface without using extra cement complete all as specified and directed.Note:-WPC shall be measured and paid separately |
| 115 | Supply only Integral water proofing compound for external plaster complete all as specified and directed. |
| 116 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-l smooth finished, and reforming benhing as required for 150mm bore complete all as specified and as directed. |
| 117 | Demolition of cement concrete (un-reinforced) in ground floors & paving n.exc 15 cm thickness (below or above ground level) complete all as specified anddirected. |
| 118 | M&L for 25 mm thick cement concrete type B - 1, 1:2:4 using (20 mm graded stone aggregate)as in levelling course over sub base to receive floor finishes complete all as specified and as directed. |
| 119 | M&L Screed bed or bedding layer 20 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed. |
| 120 | S&F coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed. |
| 121 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 122 | M& L for cement concrete 75mm thick type D - 2 using 40mm graded stone aggregate as in sub base to receive floor finish etc complete all as specified and as directed. |
| 123 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
