|
| 1 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 2 | Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed. |
| 3 | Taking down shutter of any description n.exc 1 Sqm each complete all as specified and directed. |
| 4 | Taking down shutter of any descriptionexc 1 Sqm but not exc 2.00 sqm eachcomplete all as specified and directed. |
| 5 | Supply and fixing2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 6 | Supply and fixing 2nd class HW 30mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares(without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 7 | Supply and fixing 2nd class HW 35mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares(without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 8 | Supply and fixingFlush shutters, solid core construction 35 mm thickwith block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed. |
| 9 | Supply and fixing 2nd class HW 35mm thick Plain framed, panelled factory made shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 10 | Supply and fixingsolid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified. |
| 11 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes all around . M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified. |
| 12 | Supply and Fix Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 13 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 14 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified |
| 15 | S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 16 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 17 | Supply and Fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 18 | Supply and Fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 19 | S&F in repair Steel pegs for steel windows all as specified and directed |
| 20 | S&F in repair Steel handle for steel windows all as specified and directed |
| 21 | Supply and fixing 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed. |
| 22 | Supply and fixing200mm size Aluminium anodised, barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed. |
| 23 | Supply and fixing150mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 24 | Supply and fixing250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,ISI marked, complete all as specified and directed. |
| 25 | Supply and fixing 75mm size butt hinges cold rolled medium weight ISI marked complete all as specified and directed. |
| 26 | Supply and fixing 150mm size Aluminium anodised, barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed. |
| 27 | Supply and fixing 100mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 28 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 29 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 30 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads |
| 31 | S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 32 | S&F one side frostedglass 3 mm thick, glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 33 | S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 34 | S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 35 | S&F in repair stainless steeldecorative pattern holder/end brackets suitable for drapery rod of 25 mm diacomplete. |
| 36 | S&F in repair stainless steeldecorative pattern end support suitable for drapery rod of 25 mm diacomplete. |
| 37 | S&F in repair25 mm dia stainless steeldrapery rod not less than 1mm thick cut to size and fixed in position, including Standard screw complete all as directed. |
| 38 | S&F 18/19 mm thick block boardsgrade 1 quality exterior grade commercial type, fixed with screws to timber frame complete . |
| 39 | S&F 0.90 mm thickdecorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified |
| 40 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished |
| 41 | S & FMagnatic catcher and connected plate to shutters and frame as per Sample complete all as specified and as directed. |
| 42 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 43 | M&L for preparation of new plastered surface and applyingtwo coat of white or tinned with cement base paint over priming coat on exterior wall complete all as specified and directed by Engr-in-Charge. |
| 44 | Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats creosote oil complete all as specified and as directed. |
| 45 | M&L for preparation of old decorated plastered surfaces of walls including cornices, plasters etc and applying two coat of white wash complete all as specified and directed |
| 46 | Taking down Shutters of exc 1 sq. m and n exc 2 sq. m each resecuring or easing and then refixing in same opening all as specified and directed |
| 47 | Taking down PVC Wallpanelling and similar work |
| 48 | M & LSolid PVC Wall Lining consisting of 5mm thick any colour pattern PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed by Engineer in charge. |
| 49 | M & L5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and directed by Engineer in charge. |
| 50 | M&L for preparation of new steel surface and applying of two coat of synthetic enamel paint over a one coat of red oxide exc 10cm width or girth all as specified and directed by Engr-in-charge. |
| 51 | S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap sheets having zinc coating @ 120 gram per sqm inclusive of both sides, fixed with coach screws and washers as in roof covering etc including dismantlingany gauge, thickness, including Nainital or similar pattern roof cverings complete all as specified and directed. |
| 52 | Refixing only 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap sheets having zinc coating @ 120 gram per sqm inclusive of both sides, fixed with coach screws and washers as in roof covering etc. including dismantlingany gauge, thickness, including Nainital or similar pattern roof cverings complete all as specified and directed. |
| 53 | S & F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifid and as directed. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 55 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed. |
| 56 | M & L for glazed ceramic coloured tiles 450X 300X 7mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed. |
| 57 | M&L for Forming jambs, etc. to openings in CM 1:4 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 58 | M&L for Cutting holes in brick walls Exc. half brick but not exc.one brickbuilt in cement mortar or cement lime mortar and stone walls built in lime mortar inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 59 | S&F 300mm, ordinary rat tail of mild steelrod pattern springs including roller and roller plate include necessary fitting,welding as per site requirement complete all as specified. |
| 60 | S&F Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 61 | S&F in repair Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 62 | S&F Door closer hydraulically regulated, Aluminium (extruded section) body, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 63 | S&F Framed workFe-410-W(Gde-E-250)quality-Bas in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 64 | Taking Down Aluminium shutter/frame of door/window/parition make it good (Change of glass etc.) and properly fixing with screw and necessary fitting etc., refixing in same opening complete all as specified. (note: if glass change paid seperatly) |
| 65 | Dismantiling of boarding any description fixed any position with frame work if fixed with screws. |
| 66 | ML for anodised aluminium snap frame work for false ceiling complrising GI perimeter channel 0.55mm thick with main T-flange of 20mm and web of 30mm fixed to surrounding wall flange using nylon sleeves and ss screwsand web 20mm each , crossed T with flange 20 mm and web 20 mm fixed to main T. main T is suspended from soffit at approx 1200 mm center to centre with GI wire of 6mm dia , cleat and steel expansion fasteners, GI frame shall be 600mmX600mm and laid/inserted 4mm thick nonasbestos fibre cement building boardto aluminuim frame as in ceiling complete all as specified and directed. |
| 67 | M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling,including dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed. |
| 68 | Dismantling timber scantling 40 sqcm and over in section unframed work in any position complete all as specified and directed. |
| 69 | M&L 2nd class hard wood in scantling, clean sawn, timber fixed with nails complete all as specified and directed. |
| 70 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of unframed work complete all as specified and as directed. |
| 71 | M&L 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc 13 Sqcm n.exc 25 Sqcm complete all as specified and directed. |
| 72 | M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc6sq cm n exc 13 sq cm complete all as specified and directed. |
| 73 | M&L for 2nd class hard wood plain filletsbullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc3 Sq cm and n exc 6 sq cm complete all as specified and directed. |
| 74 | M&L for preparation of new wooden surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 75 | S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified andas directed. |
| 76 | Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site. |
| 77 | M&L for rendering 15 mm thick plaster in CM 1:4 in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 78 | M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement. |
| 79 | Supply only for water proofing compound. |
| 80 | M&L in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste |
| 81 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in in cement lime or cement mortar (one side only measured in cases where both sides are plastered) |
| 82 | M&L for rendering 15 mm thick plaster in CM 1:4 in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer onon stone masonry surfaces or surface otherthan fair face of brick-work or on one side of lathing including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 83 | M&L for 10mm thick plaster in cm (1:6) on Rendering 10mm thick on the ‘other’ side of lathing including finishing even & smooth without using extra cement. |
