Renovation Work Cimcd Treatment Room Renovation And Painting In Dhanwanthari Bhavan Hospital At Kasrs
Tender Value
2.10 Lakhs
Estimated cost
Bid Submission
20 Jul 2024
0 days left
EMD
5300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kottakkal → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Work Cimcd Treatment Room Renovation And Painting In Dhanwanthari Bhavan Hospital At Kasrs
BOQ
| Sl. No. | Item Description |
| 1 | CIMCD TreatmentroomRenovation andPainting |
| 2 | 13.43.1Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 3 | 13.83.2Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile includingapplying additional coats wherever required to achieve even shade and colour.Two coats |
| 4 | 13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 5 | od230795/2022_2023Providing and fixing premium quality Curtains made of cotton as they offer a crisp, clean feel that suits traditional or modern decorating styles. making them a natural fit for windows ,doors partitions etc. Including necessary curtain rods,Rings, clamps, screws etc. including Lining and fixing charge all complete. |
| 6 | od218810/2022_2023Providing and fixing aluminium door gear- sliding track with rollers(wheels) ,Top Hung Sliding door tracks -Metal Roller Rail for Closets, Cabinets, Room Dividers and Sliding or Pocket Doors. all necessary screws ,fittings etc. are included. |
| 7 | 21.1.1.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 8 | 21.2.2Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 9 | 9.97.3Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 |
| 10 | 9.100.1Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm |
| 11 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 12 | Purchase and fixing office reception Table,as per Engineer requirements. |
AI Tender Summary
Tender Timeline
Jul 06, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 22, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender