Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-08-2024 | Due Date Extended for tenders closing on 27-07-2024 | Admin Corrigendum Date Extend | 03-09-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. MS frame shall be covered with heat moulded prelaminated decorative any colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 4 | S&Fpowder coated aluminium frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F powder coated aluminium window and ventilator shutters , side hung type / sliding without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing , anodised aluminum snap beading , screws, anodised aluminium fittings such as peg stays 150mm long (1nos). hinges type B-21 100mm long (2nos) suitable handle (1nos) complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm each pane complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed withscrews complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply and fixing mild steel butt hinges, 100 mm long, medium weight, cold rolledfixed with steel screws or welded to angle iron frame where required complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply and fixing 200mmlong aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fixing for 125 mm aluminum handles cast type anodizedcomplete all as specified and as directed by Engineer-in-Charge. |
| 11 | Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L for brick work withsub class \"B\"bricksstraight or curved on plan exceeding6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finishedeven and smooth (w/o using extra cement) complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material and labour for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces of walls finished even and smooth w/o using extra Cement complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls using mechanical spray machine/method by the authorised applicator of the manufacturer complete all as specified and as directed by Engineer-in-Charge. |
| 17 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer using mechanical spray machine/method by the authorised applicator of the manufacturer complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Supply and fixing for 15 mm bore steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Supply and fixing for 20mm bore steel water tubing galvanised, medium grade fixed to walls and ceiling or in floor complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Supply and fixing in repairs 15 mm Brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Supply and fixing in repairs 15 mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F for 15 mm bore concealed type chromium plated Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Supply and fixing for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints,laid in trenches or in floors or fixed to wall complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Supply and fixing for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints,laid in trenches or in floors or fixed to wall complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Supply and fixing 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fixing in repair 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 30 | Supply and fixing in repair15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle,long shank and cup, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed. |
| 33 | Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and fixing in repair vitreous China squatting pan, `Orissa\" pattern, size 580 x440 mm white, with integral foot rests including provision of cement concrete bedding complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm , including cutting for and pinning in ends of brackets , including 32 mm dia CP waste waste fitting and PVC waste pipe of required length complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply and fixing in repair 600 mm x 450 mm polished sheet glass mirror of thickness 5 mm of selected quality glass with PVC moulding all around, mounted on 6 mm thick CWR plywood backing and fixed to wooden/rubber plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Dismantling of stone slab and tilesof any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Material and labourfor granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Material and labourfor granite stone tiles dado 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in CM 1 :4 on brick or concrete surface complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labourfor machine cut Kota stone slabs flooring 18 to 20 mm thick over 20 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labourfor 18 to 20 mm thick machine cut Kota stone slabs in riser of steps, skirting, dado and pillar laid over 10 mm thick cement screed bed in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixing in repair sinks with drainage board made of stainless steel sheet 1mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Material and labourfor Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/450X350X7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over including and 10 mm thick rendering in CM1:4 on brick or concrete surfaces of wall to receive vertical tiles complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Material and labour for non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over andincluding 20 mm thick screed bed in cm 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 48 | Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick(below or above ground level) un reinforced complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base laid in panels complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Material and labour for vitrified Ceramic tiles 10mm thick Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Material and labour for 600x1200 mm size first quality vitrified Ceramic tiles 10-12mm thick Dark shade, high glossy, polished, area of each tiles exc 0.36 sqm in floors etc,, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 52 | All as per item No 51 above but in vertical surface such as skirting, dado and risers including 10 mm thick rendering in cm 1:4 on brick or concrete surfaces of wall to receive vertical tiles |
| 53 | S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe orfixed of size 20 mm bore(minimum weight- for 20mm - 210 gms )complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt andallloose scales of existing treatment and applying one coat of white wash on wall complete all as specified and as directed by Engineer-in-Charge. |
| 55 | All as per item No 54 above but on ceiling |
| 56 | Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt andallloose scales of existing treatment and applying one coat of oil bound distemper on wall complete all as specified and as directed by Engineer-in-Charge. |
| 57 | All as per item No 56.00 above but two coats of oil bound distemper on wall |
| 58 | Material and labour for preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt andallloose scales of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 59 | M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 mm thick a layer ofwall care putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper andapplying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt andallloose scales of existing treatment and applying one coat of cement base paint on wall complete all as specified and as directed by Engineer-in-Charge. |
| 61 | All as per item No 60 above but two coats of cement based paint on wall |
| 62 | Material and labour for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Material and labour for preparation of old painted steel surfaceof any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Material and labourfor applying onecoat of French polishing on old wood surfaces of any description, width or girth including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt andallloose scales of existing treatment and applying two coats of exterior acrylic emulsion water based (weather proof coat) paint on wall complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. |
| 67 | M&L for Steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed by Engineer-in-Charge. |
| 68 | M&L for Mild Steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 grade 165 quality A complete all as specified and as directed by Engineer-in-Charge. |
| 69 | S&F MS work as in post and strutt and fencing, drilled and countersunk for balusters running bars for doors balusters,noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed drilling hoes nothcing for wire etc flat iron fillets ( for securing wire mesh ) including all necessary drilling bolting or riveting etc. and similar work conformingto Fe - 290 Gde E - 165 complete all as specified and as directed by Engineer-in-Charge. |
| 70 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel and iron surfaces over 10cm in width or girth including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Demolition of cement concrete of any description and in any position not otherwise specificially provided for complete all as specified and as directed by Engineer-in-Charge. |
| 72 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in for fixing angle iron and coping including necessary form work) complete all as specified and as directed by Engineer-in-Charge. |
| 73 | M&L for applying Twocoats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004 ,Alkali & fungal resistance ,dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ .90 litre /10 sqm over new surfacescomplete all as specified and as directed by Engineer-in-Charge. |
| 74 | M & L for finishing walls with Premium Acrylic smooth exterior paint with Silicone additives of required shade : NEW work( Twocoats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applird @ 2.20 Kg/10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 75 | M&L for finishing walls with textured exterior paint of required shadetwocoats applied @ 3.28 ltr/10sqm over and including priming coat of exterior primer applied @2.20 Kg /10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement ofworn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed by Engineer-in-Charge.Note: Spare parts required for replacement shall be measured and paid seperately. |
| 77 | S&F in replacement ofold unserviceableheating element titanium coated of rating 1.5 Kw suitable for water heater storage type any make and type as required at site including rubber washers (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 78 | All as per item no 77 above but 2.0 KW Capacity . |
| 79 | S&F in replacement of old unserviceableThermostat (ISI Marked) suitable for geysers 25 Ltrs to 50 Ltrs capacity, suitable for AC 230 volt. The adjustable range from 0-90 degree Celsius complete all as specified and as directed by Engineer-in-Charge. |
| 80 | S&F in replacement of old unserviceableSyphon assembly of 06 holes / 09 holes (ISI Marked) made out of brass of 25/35 ltr capacity geyser including necessary studs, screws and rubber gasket/washerscomplete all as specified and as directed by Engineer-in-Charge. |
| 81 | S&F in replacement of old U/S MS Bottom cover platewith matching colour of geyser complete all as specified and as directed by Engineer-in-Charge. |
| 82 | M & L for replacement ofold unserviceablethermal insulation material non hygroscopic, fire resistant, fiber glass wool for 25-50 ltrs capacity geyser complete all as specified and as directed by Engineer-in-Charge. |
| 83 | M & L for replacement of old unserviceablenon return valve made out of brass (ISI marked) for bore dia of pipe 15mm size complete all as specified and as directed by Engineer-in-Charge. |
| 84 | M & L for replacement ofold unserviceablesafety valve(ISI Marked) suitable for 25 to 50 Ltrs capacity geysers complete all as specified and as directed by Engineer-in-Charge. |
| 85 | S&F in replacement of old U/S Indicator lamp (green & red ) with Neon lamps (ISI Marked) indicating automatic working of geyser round/square type suitable for geyser capacity 25/50 ltrAC 230 volt complete all as specified and as directed by Engineer-in-Charge. |
| 86 | S&F in replacement old unserviceableinternal glass lined /enameled/ titanium coated ,1.8 mm thick (18 gauge) steel water tank with 0.7 Mpa bar pressure, suitable for geyser 25 ltr capacity with rubber gasket, complete all as specified and as directed by Engineer-in-Charge. Notes :- (i) The tank shall be tested at site and shall be able to withstand requisite pressure, necessary arragengments for the testing shall be arranged by the contractor.(ii) Tank with stud type and round element shall only be provided and trianguluar element shall not be accepetable. |
| 87 | All as per item no 86 above but 50 Ltrs Capacity of Geyser |
| 88 | S&F in replacement ofold unserviceableand providing new Outer Cover body suitable for geyser of following capacity with rust proof made out of CRCA sheet (16 gauge) 1.50 mm thick electro statically powder coated stove enamelled factory made complete with fixing bracket, nuts & bolts to fixed with wallSuitable for 25 Ltrs capacity Geyser complete all as specified and as directed by Engineer-in-Charge. |
| 89 | All as per item no 88 above but 50 Ltrs Capacity of Geyser |
| 90 | M&L for Brazing, welding to any size of inner shell copper/steel tank at leaking spot of any capacity any type Geyser after the repair checking up throughly for leaking including replacemnet of worned out nuts,bolt,and washer complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F in replacement of old u/s Geyser Element for instant type geyser (as per suitable for existing) 3 KWcomplete all as specified and as directed by Engineer-in-Charge. |
| 92 | S&F Geyser connections pipes for hot and cold water supply made of stainless steel wire braided conntector with chrome finish heavy duty nutsof 15mm size with suitable lengh including taking down of old unserviceable pipes complete all as specified and as directed by Engineer-in-Charge. |
| 93 | S&F in repairs Heating element 3 KW with thermostat for electrical Back up complete all as specified and directed by Engineer-in-Charge |
| 94 | S&F in repairs of cable 3 core 4 sqmm FRLSH PVC copper conductor complete all as specified and as directed by Engineer-in-Charge. |
| 95 | S& F in repairs plug top of 16 Amp, 3 Pin 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Supply and fix in replacement of old unserviceable water heater storage type ( geyser) electric , capacity 25 Ltrs BEE 5 Star rated complete all as specified and as directed by Engineer-in-Charge.Note:- Old U/S Geyser will be to deposit in MES store yard. |
| 97 | M & L formetal clad plug top 20 A 2 P+ E, 230 V AC asin repair complete all as specified and as directed by Engineer-in-Charge. |
| 98 | M & L formetal clad socket 20 A 2 P+ E 230 V AC asin repair complete all as specified and as directed by Engineer-in-Charge. |
| 99 | Supply & fix anchor bolt of size 12mm x 100mm long with washer including drilling holes for fixing anchor bolt and making good to the disturbed surface matching withspecification complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Taking down carefullyaluminium point wiring (light, Socket or power) completeincluding fittings and fixturessuch as switches, ceiling roses pendents, regulators, sockets etcincluding making good the disturbed portion/surface complete all as specified and as directed by Engineer-in-Charge. |
| 101 | M&L for point wiring with colour coding multistranded copper conductor cable,PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealedConduit( dia not less than 20 mm) with fixing accessories for one light /fan/bell point controlled by one switchwith pressed steel concealed terminal boxes coveredwith 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cablesize 1.5 Sqmm for earth wire connected to common earth dollycomplete all as specified and as directed by Engineer-in-Charge. |
| 102 | All as per item No 101 above but for one3/5 pin socket 5 Amp on same board. |
| 103 | All as per item No 101 above but for one3/5 pin socket 5 Amp on independent board. |
| 104 | All as per item No 101 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm wire incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm Note:-Cost making good disturbed surface below existing point wiring taken out vide item No 101 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adacent surface conduit and all accessories as required for concealed point wiring shall be deemed to be included in the unit rate quoted against these items. |
| 105 | M&L for point wiring with multistranded copper conductor cable,PVC insulated and unsheathedsize 1.5 sqmm (FRLSH) drawn in and inclPVC casing and caping with fixing accessories for one light /fan point controlled by one switchwith pressed steel concealed terminal boxes coveredwith 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cablesize 1.5 Sqmm for earth wire connected to common earth dollycomplete all as specified and as directed by Engineer-in-Charge. |
| 106 | All as per item No 105 above but for one3/5 pin socket 5 Amp on same board. |
| 107 | All as per item No 105 above but for one3/5 pin socket 5 Amp on independentboard. |
| 108 | All as per item No 105 above but for 3/5 pin socket outlet 15 Amp independent with 2.5 Sqmm wire incl continous earthing with multistandered copper condutor PVC insulated unsheathed size 2.5 Sqmm. |
| 109 | S&F switch piano flush type/Bell push, 5 Amps, single pole one way 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 110 | S&Fsocket 3/5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 111 | S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 112 | S&F switch15 Amps flush type 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 113 | S&F Ding Dong door bell230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 114 | S&F Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 115 | S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm,three terminals, 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 116 | S&F stepped type electronic fan regulator flush type 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 117 | S&FBatten holder PVC/Polycarbonate base / backsuitable for LED lamp. 230 Volt, AC complete all as specified and as directed by Engineer-in-Charge. |
| 118 | S&F in repair LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 119 | S& Fin repair PVC Combination Box type complete with switch & socket 5/6 Amp ,230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 120 | S& F in repair PVC Combination Box type complete with switch & socket15/16 Amp.230 Volts , AC complete all as specified and as directed by Engineer-in-Charge. |
| 121 | S&F in repair single pole and neutralsheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 ampsMCB complete all as specified and as directed by Engineer-in-Charge. |
| 122 | S&F Skylite recess mounting,36W, LED 2\"x2\" luminaire integrated electronic driver, optics diffused, completeincluding electrical connection with copper cable from ceiling rose to fittings incltaking down old Unserviceable light fittings of any type and any sizecomplete all as specified and as directed by Engineer-in-Charge. |
| 123 | S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittingsincluding taking down existing fittings complete all as specified and as directed by Engineer-in-Charge. |
| 124 | S&FLED 6000K (2’ feet), 10WDecorativeLED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, completeincluding taking down existing fittings complete all as specified and as directed by Engineer-in-Charge. |
| 125 | S&F LED bulkhead luminaire 10W decorative type as per sample completeincluding electrical connection with copper cable from ceiling rose to fittings including taking down existing fittings complete all as specified and as directed by Engineer-in-Charge. |
| 126 | S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc includingelectrical connection with copper cable from ceiling rose to fittings including taking down existing fittings complete all as specified and as directed by Engineer-in-Charge. |
| 127 | M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulatedFRLSH sheathed copper conductor cableconnecting to common earth dolly in and including heavy dutyPVC casing caping including dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and as directed by Engineer-in-Charge. |
| 128 | M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulatedFRLS sheathed copper conductor cablesconnecting to common earth dolly in and including heavy duty PVC concealedConduit fisrt quaility 20mm and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and as directed by Engineer-in-Charge. Note:-(i) Cost making good disturbed surface below existing point wiring taken out above and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit as applicable shall be deemed to be included in the unit rate quoted against these items. (ii) One RM of 3x6 Sqm wire and one RM of conduit/casing shall be measured one unit. |
| 129 | S & F in replacement of exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hzcomplete all as specified and as directed by Engineer-in-Charge.Note:- Old U/S exhaust fan will be deposite in MES store. |
| 130 | S & Fin repairs single pole and neutral sheet metal enclosures for Distribution board (DB\"s)suitable for MCBs fitted with busbar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and as directed by Engineer-in-Charge. |
| 131 | All as per item No 130 above but 8 ways |
| 132 | S&F MCB SPN 40-63 Amps 240Vincl all termnials, fitting etc. including taking down old U/S complete all as specified and as directed by Engineer-in-Charge. |
| 133 | S&F MCB SP 06 to 40 Amps 240Vincl all termnials, fitting etc including taking down old U/S complete all as specified and as directed by Engineer-in-Charge. |
| 134 | S & Fin replacement of Wall Mounted Fan (Plastic body) of size 400 mm sweep, 1300 RPM, 3 blade complete all as specified and as directed by Engineer-in-Charge.Note:- Old U/S wall mounted fan will be deposit in MES sotre. |
| 135 | M&L for rewinding of exhaust fan of size 250 to 400 mm sweep Including Taking down ,dismantiling, opening ,descaling, adjustment, re fixing , cleaning, greasing, painting, replacing minor spares (ie nut, bolt,washers) and rewinding with proper size copper winding insullation materials etc wire warnishing complete all as specified and as directed by Engineer-in-Charge.Note : Spares required for replacement will be measured and paid separatelly. |
| 136 | S&F Ball bearing complete all as specified and as directed by Engineer-in-Charge. |
| 137 | S&F Brass bushes complete all as specified and as directed by Engineer-in-Charge. |
| 138 | S&F in replacement of u/s Exhaust fan louvers complete with nut & bolts etc complete all as specified and as directed by Engineer-in-Charge. |
| 139 | S&F Exhaust fan blade of any sweep with screws/bolts, nuts complete all as specified and as directed by Engineer-in-Charge. |
| 140 | M&L for rewinding of Ceiling fan , Air circulator & wall mounted fans of any size any sweep and any capacity of fansusing super enameled copper winding wire of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position complete all as specified and as directed by Engineer-in-Charge. Note: Spares required for replacment will be measured and paid separatelly |
| 141 | S&F Ball bearing complete all as specified and as directed by Engineer-in-Charge. |
| 142 | S&F Brass bushes complete all as specified and as directed by Engineer-in-Charge. |
| 143 | S&F 2.5 to 4.0mfd capacitor complete all as specified and as directed by Engineer-in-Charge. |
| 144 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and as directed by Engineer-in-Charge. |
| 145 | Supply and fix in repairBLDC fan Energy Efficicent ceiling fan Sweep size 1200mm with speed 350 RPM motor air delivery 220 CMM input power 28W-32W and having remote control complete all as specified and as directed by Engineer-in-Charge. |
| 146 | S & Finreplacement of exhaust fans made of Steel body / MS Body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hzcomplete all as specified and as directed by Engineer-in-Charge.Note for item No 146 &147 - Old unsv fan will be deposit in MES store. |
| 147 | M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and as directed by Engineer-in-Charge. |
| 148 | M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 16 sqmm 2 core complete all as specified and as directed by Engineer-in-Charge. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail