|
| 1 | Note:- Following unserviceable parts of existing wooen furniture shall be removed and replaced/repaired carefully without disturbing the adjoining parts including tightening, screwing,glueing, nailing wherever applicable and work will be executed where the furniture exists at BSO furniture yard of GE 871 EWS and Various locations at Joshimath under jurisdiction ofGE 871 EWS as directed.Note :-area of maint can be incredesed/decrease as per direction recoved by higher authority. |
| 2 | Bed Hard Wooden with ply Top , FD- 246 : |
| 3 | Removing old unserviceable head board and supply & fixing new head board made out of Istclass hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI markedfor both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:-Playwood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay |
| 4 | Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply |
| 5 | Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1985x100x35mm as per drg duly french polished. |
| 6 | Removing old broken shortrailsand stiffenerand converstion of old broken long rail into short rails and stiffner from obtained from items no 1.3 above and fix the same as per drg as per existing duly french polished |
| 7 | Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg Note Playwood shall be make of Archid Ply/Green Ply/Century Ply |
| 8 | Preparation of wooden sufaces of Bed Hard wooden with plywood topby throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of one or more coat to obtain a glossy finish all as specified and directed. |
| 9 | Chair dinning High back (Drg No FD-357) |
| 10 | S&F in repairsfirst class teak wood rear & front leg all as specified and directed. |
| 11 | S&F in repairsfirst class teak wood rear/front/side rail all as specified and directed. |
| 12 | S&F in repairsfirst class teak wood back rest all as specified and directed. |
| 13 | S&F in repairsfirst class teak wood stiffener all as specified and directed. |
| 14 | M&L providing new Cushion of appropriate size of cool foam with dismantling old one with first class raxine as per sample held with GE.Make- Sleepwell/Featherfoam |
| 15 | Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish all as specified and directed. |
| 16 | Chair CBA DB-3942: |
| 17 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 18 | Removing of old unserviceable side rails and supply & fixing new side rails made out of seasoned shisham/teak wood duly holed as per drg. |
| 19 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood as per drg. |
| 20 | Removing of old unserviceable stiffeners and S&F new stiffeners made out of seasoned shisham/teak wood as per drg. |
| 21 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood as per drg. |
| 22 | M&L french polishing to repaired chairs with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 23 | Bed Hard Wooden with Ply Top/Bed Hard Special (TP) |
| 24 | Removing old unserviceable head board and supply & fixing new head board made out of Istclass hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI markedfor both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:-Playwood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay |
| 25 | Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply |
| 26 | Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1985x100x35mm as per drg duly french polished. |
| 27 | Removing old broken shortrailsand stiffenerand converstion of old broken long rail into short rails and stiffner from obtained from items no 1.3 above and fix the same as per drg as per existing duly french polished |
| 28 | Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg Note Playwood shall be make of Archid Ply/Green Ply/Century Ply/Kit ply |
| 29 | Preparation of wooden sufaces of Bed Hard wooden by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of one or more coat to obtain a glossy finish all as specified and directed. |
| 30 | Chair easy cushioned FD-358 (m) |
| 31 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 32 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 33 | Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg. |
| 34 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg. |
| 35 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg. |
| 36 | Providing new cushion on Back rest & Seatof appropriate size of cool foam complete with dismantling old one with first class raxine/tepstray cloth as per sample held with GE.Make- Sleepwell/Featherfoam |
| 37 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 38 | Chair dining FD-279 : |
| 39 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 40 | Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg. |
| 41 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg. |
| 42 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 43 | Chair writing (Drg No FD-202/ 250/285): |
| 44 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 45 | Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg. |
| 46 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg. |
| 47 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg. |
| 48 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 49 | Chair easy FD-229,DB-4174 : |
| 50 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 51 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 52 | Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg. |
| 53 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg. |
| 54 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg. |
| 55 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 56 | Re-canning of Chairs (FD-228, FD-224, FD-274, FD-250, FD-75, FD-228) :-M&L for removing of old/broken/unserviceable plastic cane and re-canning of chair dining, chair CB without arms/chair writing, chairs CB with arms, chairs writing, chair CB office, chairs easy FD/NF,with 2.00 to 2.5mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godrej pattern. |
| 57 | Teapoy ( Drg No FD-382/ 232 & 278) |
| 58 | Removing the existing unserviceable leg from teapoy and S&F the same made of first class Teak wood to match with the existing all as specifed and directed |
| 59 | Removing the existing unserviceable top rail (long/front) from Teapoy and S&F the same made offirst class teak wood to match with the existing all as specifed and directed |
| 60 | Removing the existing unserviceable top rail (short/side) from teapoy and S&F the same made of first class teak wood to match with the existing all as specifed and directed |
| 61 | Removing the existing unserviceable top from teapoy and S&F the same with new one as to match with the existing made of 18mm thick pre-laminated MDFboard one side laminated with 4mm thick teak wood beading all as specified and directedMake - Archid ply/Green ply/Century Ply/Kit ply/Bhutan |
| 62 | M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas waxfor Teapoy all as specified and directed. |
| 63 | Table Dining 6/8 persons-FD-273/376 :- |
| 64 | S&F following components of Table including dismantling unservicable one all as specified and as directed.Leg Shall be made of first class teak wood |
| 65 | Top made of 18mm thick pre-laminated MDF/Particle board one side teak face including provision of 4mm thick teakwood beading all around complete. |
| 66 | Short Rail shall be made of first class teak wood as directed |
| 67 | Long Rail shall be made of first class teak wood as directed |
| 68 | Preparation of wooden sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformlyand polishing one or more coats with french polishto obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed. |
| 69 | PegTable:- |
| 70 | S & F following components of Table including dismantling unservicable one all as specified and as directed.Leg Shall be made of first class teak wood |
| 71 | Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete. |
| 72 | Long rail shall be made of first class teak wood as directed |
| 73 | Short rail shall be made of first class teak wood as directed |
| 74 | Preparation of sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformlyand polishing one or more coats with french polishto obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed. |
| 75 | Table Dressing Gents (Drg FD-230, 32 (M)) : |
| 76 | Taking out unserviceable top / bottomof table dressing Gents with mirror and supply & fixing top and bottom made out of 18/19mm thick blockboard commercial fixed with 0.9mm thick laminated sheet with Fevicol on top and bottomshall be of 6mm thick ply wood commercial BWR grade-Iincluding 6mm thick teak wood edging all around with Fevicol and nails complete. |
| 77 | Taking out unserviceable Side / middleof table dressing Gents with mirror and supply & fixing side and middle made out of 18/19mm thick blockboard commercial fixed with 0.9mm thick laminated sheet with Fevicol on top and side and middle shall be of 6mm thick ply wood commercial BWR grade-Iincluding 6mm thick teak wood edging all around with Fevicol and nails complete. |
| 78 | Taking out unserviceable mirror of Table dressing Gents and supply & fixing of mirror 5.5 mm thickwith teak woodframe and back made of 6mm thick ply wood commercial BWR Gde-I.( Make : SAINT GOBIN / Modiguard /Atul as specified and approved by Accepting officer) |
| 79 | supply & fixing new drawerof table Dressing gents made out Ist class hard wood [teak]with bottom of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 40mm dia aluminium andozied/ SSfancy type in drawercomplete . |
| 80 | S & F new Wall hanging Hook alongwith bracket ‘L’ type of Table dressing Gents and providing new bracket ‘L’ type made out of Stainless steel connecting to base frame and mirror frame to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge. |
| 81 | supply & fixing new mirror frameof table Dressing Gents made out Ist class hard wood [teak]with back side of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 100mm longSShanging hook in mirror frame complete all as specified and directed by Engineer -in-charge. |
| 82 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 83 | Table Writing Wooden (Drg No FD-249, 275,33) |
| 84 | Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board of Make century ply/Green ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed |
| 85 | Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed |
| 86 | Removing the existing unserviceable bottom long supporter (stifferner) of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed |
| 87 | Removing the existing unserviceable side/front rail of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed |
| 88 | Removing the old unserviceable complete cupboard from the table writing and S&F new cupboard as to match with existing made of 18 mm thick prelaminated MDF board Make of century ply/Green ply/Archid ply including back provided with 6mm thick commercial plywood all as specified and shown in drawing. |
| 89 | Removing the existing unserviceable front shuter of the table writing and S&F the same with new one as to match with existing made out of 18 mm thick MDF board of Make- century ply/Green ply/Archid ply one side laminated finish with magnectic catcher all as specified and directed.Note :- (a)Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality).(b) Hinges shall be 50 mm of approved quality. |
| 90 | Removing the existing unserviceableside stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed |
| 91 | Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF board of Make century ply/Green ply/Archid ply one side laminated finish including provision of knoball as specified and shownon drawing. Note :-Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality |
| 92 | M&L for preparation of wooden surfaces of the table writing with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 93 | REPAIR TO TABLE CENTRE(FD-235, 274): |
| 94 | Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18 mmthick preliminatedMDF board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood. |
| 95 | Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item. |
| 96 | M&L for preparation of wooden surfaces of the Center Tabel with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 97 | TABLE CENTRE 2 TIER |
| 98 | Removing of old U/S existing top and bottom from center table 2 Tier and S&F new top and bottom of size as per drg. Top and bottom shall be 18 mmthick preliminatedMDF/Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood. |
| 99 | Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item. |
| 100 | M&L for preparation of wooden surfaces of the Center Tabel with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 101 | Meat Safe FD- 47 (m): |
| 102 | Removing of old unserviceable front shutters with wire gauge/side wire gauge and S&F new front shutters with wire guage/sides of wire gauge. Shutter should be fitted with 25mm long butt hinges.Wire guage shall be of 12mm mesh and of 20 gauge. 75mm hasp and staple should be providedto top of shutter.All wood shall be 1st class teak.Two numbers ball spring catch shall be provided to each shutter and one coat of white paint .all as per shape and size shown on drawing No FD-47 |
| 103 | Removing old unserviceable aluminium hasp and saple and S&F New 75mm long aluminium hasp and staple best quality. Drg No FD-47 |
| 104 | Removing old unserviceable aluminium handle and S&F new 110mm long aluminium handle of best quality Drg No FD-47 |
| 105 | M&L for preparation of old wooden surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply primerwhere ever required and one coat of synthetic enamel white paint of approved make & quality inside and out sideofMeat safe all as specified and as directed by Engr-in-Charge. Drg No FD-47 |
| 106 | SOFA SET 4/5 SEATER(FD-281) |
| 107 | M&L for removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & qualityMake : sleepwell/Feather foam |
| 108 | M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed. |
| 109 | M&L for removing unserviceable/ broken Front Legs ofsofa set 4 and 5 seater and S&F New Front Legs to match the original complete all as specified and directed. |
| 110 | M&L for removing unserviceable/ broken rear legs ofsofa set 4 and 5 seater and S&F new rear leg to match the original complete all as specified and directed. |
| 111 | M&L for removing unserviceable/ broken batternsofsofa set 4 and 5 seaterand S&F new batterns to match the original complete all as specified and directed. |
| 112 | M&L for removing unserviceable/ brokenback rail for three seater ofsofa set 5 seaterand S&F new back rail to match the original complete all as specified and directed. |
| 113 | M&L for removing unserviceable/ broken front rail for three seater ofsofa set 5 seater and S&F new front rail to match the original complete all as specified and directed. |
| 114 | M&L for removing unserviceable/ broken back rail for single seater ofsofa set 4 seater and to match the original complete all as specified and directed. |
| 115 | M&L for removing unserviceable/ broken front rail for single seater ofsofa set 4seater and to match the original complete all as specified and directed. |
| 116 | M&L for removing unserviceable/ broken hand rest of sofa set 4 and 5 seater and S&F New hand rest to match the original complete all as specified and directed. |
| 117 | M&L for preparation of sufaces of sofa set 4 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed. |
| 118 | M&L for preparation of sufaces ofsofa set 5 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed. |
| 119 | SOFA SET 5 SEATER Special (TP) |
| 120 | M&L for removing the old worn/torn out cushion from SOFA SET 5 SEATER Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & qualityMake : sleepwell/Feather foam |
| 121 | M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed. |
| 122 | M&L for removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed. |
| 123 | M&L for removing unserviceable/ broken rear legs ofSOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed. |
| 124 | M&L for preparation of surfaces ofsofa set 5 seater special(TP) by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed. |
| 125 | Sofa Set Single Seater Special (TP) |
| 126 | M&L for removing the old worn/torn out cushion from Sofa Set Single Seater Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & qualityMake : sleepwell/Feather foam |
| 127 | M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from Sofa Set Single Seater Special (TP) and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed. |
| 128 | M&L for removing unserviceable/ broken Front Legs of Sofa Set Single Seater Special (TP) and S&F New Front Legs to match the original complete all as specified and directed. |
| 129 | M&L for removing unserviceable/ broken rear legs ofSofa Set Single Seater Special (TP)and S&F new rear leg to match the original complete all as specified and directed. |
| 130 | M&L for preparation of sufaces ofsofa set single seater special(TP) by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed. |
| 131 | Table office Clk wooden. |
| 132 | Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board Make of century ply/Green ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed |
| 133 | Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed |
| 134 | Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak woodand all as specified and directed |
| 135 | Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed |
| 136 | Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF/Particle board of Make century ply/Green ply/Archid ply one side laminated finish including provision of knoball as specified and shownon drawing.Note :-Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality |
| 137 | M&L for preparation of wooden surfaces of the table Office Clk wooden with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 138 | Table 900mm x 600 mm with/ without Drawer ( Drg FD-283 & 284) |
| 139 | Taking out unserviceable top and S & Fnew topof900 mm x 600mm made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990).Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed. |
| 140 | Taking out unserviceable Drawer of Table 900mm x 600mm and providing newdrawer made of 1st classteak wood frame with 6mm thick plywood at bottom of drawer and 40mm dia aluminium andozied/ SS fancy typein each type drawer shutter & one coat of french polish high glossy finish with preparation of surface complete. |
| 141 | Taking out unserviceable Long rails of Table 900mm x 600mmand providingnew long rail of Ist class hard wood[Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed. |
| 142 | Taking out unserviceable short rails of Table 900mm x 600mmand providingnew short rail of Ist class hard wood with high glossy finish french polish after preparation of surface complete all as specified and directed. |
| 143 | Dismentling of old unservicable legs and S & F of newlegs made out of first class hard wood ( Teak) including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete all as per size and design of existing Table 900mm x 600mmallas perdrg and as per direction of Eng-in-charge. |
| 144 | Taking down unserviceable center Stiffener and supply & fixing new centre Stiffener made out of Ist class hard wood (Teak). |
| 145 | Taking down unserviceable Side Stiffener and supply & fixing new Side Stiffener made out of Ist class hard wood (Teak). |
| 146 | Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 147 | Taking out unserviceable bracket ‘L’ type of Table 900mm x 600mm and providing new bracket ‘L’ type made out of Ist class hard wood [Teak] complete. |
| 148 | Table Dressing Ladies ( Drg FD_251, FD/E6/MAP/16) : |
| 149 | Taking out unserviceable top / bottom of table dressing with mirror ladies and supply & fixing top & bottom of table dressing with mirror ladies made out of 18/19 mm thick MDF Board BWR Gde-I including 6mm thick teak wood edging all around with Fevicol and nails complete as per size and design of existing Table Dressing and as per direction of Eng-in-charge. |
| 150 | Taking out unserviceable Side / middle of table dressing with mirror ladies and supply & fixing Side and middle of table dressing with mirror ladies made out of 18/19 mm MDFboardBWR Gde-I including 6mm thick teak wood edging all around with Fevicol and nails complete as per size and design of existing Table Dressing and as per direction of Eng-in-charge. |
| 151 | Taking out unserviceable mirror of Table dressing Ladies and supply & fixing of mirror 5.5 mm thickalongwith teak woodframe and back made of 6mm thick ply wood commercial BWR Gde-I .( Make : SAINT GOBIN / Modiguard/Atulas specified and approved by Accepting officer) |
| 152 | Renewal of glass shutter of Table Dressing Ladies with mirror5.5mm thick double leaf complete with aluminium channal all as shown in drawing. Make : SAINT GOBIN or modiguard orequivalent as specified and approved by Accepting officer). |
| 153 | supply & fixing new drawerof table Dressing Ladies made out Ist class hard wood [teak]with bottom of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 40mm dia aluminium andozied/ SSfancytype in drawercomplete . |
| 154 | Dismantling of unserviceablelegs atbottom of Table Dressing Ladies and supply & fixing of new legs with frame made out of Ist class hard wood [Teak ] as per size and design of existing Table Dressing and as per direction of Eng-in-charge. |
| 155 | Dismantling of old unserviceable bottom long railof Table dressing ladies and providing new new long railmade of teak wood.All as per size and design shown on drawing. |
| 156 | Dismantling of old unserviceable bottom Short railof Table dressing ladies and providing new new short railmade of teak wood.All as per size and design shown on drawing. |
| 157 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 158 | Chair Wooden Bottom without Arm (Drg FD-56 (M), 212 & 285) |
| 159 | Taking out unserviceable ply wood seat and S&F6mm thick plywood BWR grade ISI marked with 6mm dia perforation, fixed with screws as in seat complete. |
| 160 | Dismantling of unserviceablefront legs and providingnewfront leg made out of 1stclass hard wood (Teak) complete including hard rubber ring /PVC Shoe provided at bottom of legs with screw. |
| 161 | All as per item No. 5.02above but rear leg of Chair WB. |
| 162 | Taking down unserviceable side rails of Chair WB and supply & fixing new side rails made out of Ist class hard wood (Teak). |
| 163 | Taking down unserviceable seat frame (front rail/back rail) of Chair WB and supply & fixing new seat frame (front rail/back rail) made out of Ist class hard wood (Teak). |
| 164 | Taking down unserviceable sideStiffeners ofChair WB and supply & fixing new Stiffener made out of Ist class hard wood (Teak). |
| 165 | Taking down unserviceable centre Stiffeners ofChair WB and supply & fixing new Stiffener made out of Ist class hard wood (Teak). |
| 166 | Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 167 | Side Board (Drg FD-26 (M), 241& 371) : |
| 168 | Taking out existing old unserviceable top/bottom of side board and S&F new top/bottom made of 18/19 mm thick prelimanted particle board including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge. |
| 169 | Taking out existing old unserviceable side/middle of side board and S&F new side/middle made of 18/19 mm thick prelimanted particle board including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge. |
| 170 | Taking out unserviceable ply from back side of Side Board and providing new6mm thick ply wood commercial BWR grade –I. |
| 171 | Taking out unserviceable shutter of Side Board and supply & fixingnew shutter double leaf made of 18/19 mm thick prelimanted particle board fixed with 50mm hinges 3 Nos in each leaf with 6mm thick TW edging including replacement of 40mm plastic knob superior quality in each shutter. |
| 172 | S&Ffor taking out old unserviceable drawer of side Board and providingnew drawer of made of Ist class hard wood [teak] and bottom of 6mm thick plywood commercial BWR grade-I includingreplacement of40mm dia aluminium andozied/ SS fancy type knob in each drawer and polishing all wood work complete |
| 173 | Dismantling of old unserviceable bottomlegs of Side Board and providing newlegs of 45x 45 mm size made of teak wood.All as per size and design shown on drawing. |
| 174 | Dismantling of old unserviceable bottom long railof Side Board and providing new new long railmade of teak wood.All as per size and design shown on drawing. |
| 175 | Dismantling of old unserviceable bottom Short railof Side Board and providing new new short railmade of teak wood.All as per size and design shown on drawing. |
| 176 | Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 177 | Hand Stand with Mirror (FD-361 & 362) |
| 178 | Taking out unserviceablemirror and supply & fixing of new Mirrror of thickness 5.0 mm alongwith semiround beat around the mirror make- Modiguard and equilvalent. |
| 179 | Taking out unserviceableveneer on the top and supply & fixing made out of 6 mmthick veneer with main boardincluding 6mm thick teak wood edging all around with Fevicol and nails complete as per drg and directed by Engineer -in-charge. |
| 180 | Taking out unserviceable ply at the back side and supply & fixing made out 6mm thick ply wood commercial BWR grade-I including two hanging clips with Fevicol and nails complete as per drg and directed by Engineer -in-charge. |
| 181 | Taking out unserviceable Hook on the top and supply & fixing new hook of stainless steel fancy type as per drg and directed by Engineer -in-charge. |
| 182 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
