|
| 1 | RE-CANNING OF FURNITURESMaterial and labour for removing the existing unserviceable cane plastic, cleaning the cane holes and recaning with 2mm half round new plastic cane and 4mm plastic cane for border strands of approved make in Godrej pattern to all sorts of chairs except Chair Varandah all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: Chair Dining FD-203/FD-228/FD-279, Chair Easy FD-229, Stool Dressing FD-252, Chair writing FD-280, Bin Soiled linen FD-244 |
| 2 | BED HARD PLYWOOD TOP Removing existing unserviceable ply wood 12mm thick from bed ply top and supply and fix BWR grade new plywood 1800x900x12mm thick for bed ply wood top including tightening the bed by providing four angle type wooden brackets to all corners of bed plywood all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-246,(Make :-Greenply, Archidply,Century) |
| 3 | Supply and fix in repairs 4mm thick Plywood one side teak face fixed to both side of head board including teak wood beading of size 25x4mm for bed plywood top all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-246 |
| 4 | All as per Item No.03 here-in-before but for foot board.Drawing No: FD-246 |
| 5 | Supply and fix in repair first class hard teak wood long rail (one No) of bed ply wood top all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-246 |
| 6 | Supply and fix in repair first class hard teak wood leg of foot board (one No) of bed plywood top all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No.FD-246 |
| 7 | Supply and fix in repair first class hard teak wood leg of head board (one No) of bed plywood top all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No.FD-246 |
| 8 | Removing the existing unserviceble top from the following furniture items and replacing with new top of size 18mm thick Pre laminated particle board, 4mm thick teak wood beading shall be fixed al-around the edges of top of table all as shown in drawing including tightening the frame complete all as specified and as directed by Engr-in-charge. |
| 9 | Table Writing (FD-275) |
| 10 | Table 900x900mm (FD-88,291) |
| 11 | Teapoy (FD-232, FD-34(M), FD-278) |
| 12 | Peg Table (FD-25, FD-227) |
| 13 | Table Dining 1200x900mm (FD-273) |
| 14 | Table Dining 6 Persons 1500x900mm (FD-239) |
| 15 | Table Dining 8 Persons 1800x900mm (FD-239) |
| 16 | Table Centre 900x450mm (FD-225, FD-274) |
| 17 | Table 900x600mm (FD-223,224,283,284) |
| 18 | TABLE WRITING (FD-275) Removing existing unserviceable wooden components from table writing (FD-275) and supply and fix new componets made out of first class hard wood teakwood all as shown in drawing and all as specified and as directed by Engr-in-charge. |
| 19 | Leg |
| 20 | Stiffener |
| 21 | Top Rail |
| 22 | Bottom Rail |
| 23 | Shutter |
| 24 | Brass knobs |
| 25 | Drawer |
| 26 | Only tightening joints by applying fevicol and wooden plugs |
| 27 | TABLE 900mm X 900mm (FD-88 (M)/291) Removing existing unserviceable wooden components from table 900x900mm (FD-88 (M)/291) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 28 | Leg |
| 29 | Side rail |
| 30 | Wooden Brackets |
| 31 | Only tightening joints by applying fevicol and wooden plugs |
| 32 | TEAPOY (FD-232, FD-34(M), FD-278) Removing existing unserviceable wooden components from teapoy (FD-232, FD-34(M), FD-278) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 33 | Leg |
| 34 | Side rail |
| 35 | Wooden Brackets |
| 36 | Only tightening joints by applying fevicol and wooden plugs |
| 37 | PEG TABLE (FD-236, FD-277) Removing existing unserviceable wooden components from Peg Table (FD-236, FD-277) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 38 | Leg |
| 39 | Top Rail |
| 40 | Bottom Rail |
| 41 | Only tightening joints by applying fevicol and wooden plugs |
| 42 | Table Dining 1200x900mm (FD-273) Removing existing unserviceable wooden components from Table Dining 1200x900mm (FD-273) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 43 | Leg |
| 44 | Top rail |
| 45 | Wooden Bracket |
| 46 | Only tightening joints by applying fevicol and wooden plugs |
| 47 | Table Dining 6 Persons 1500x900mm (FD-239, FD-273)Removing existing unserviceable wooden components from Table Dining 6 Persons 1500x900mm (FD-239, FD-273) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 48 | Leg |
| 49 | Top rail |
| 50 | Wooden Bracket |
| 51 | Only tightening joints by applying fevicol and wooden plugs |
| 52 | Table Dining 8 Persons 1800x900mm (FD-239, FD-273) Removing existing unserviceable wooden components from Table Dining 8 Persons 1800x900mm (FD-239, FD-273) and supply and fix new componets made out of first class hard wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 53 | Leg |
| 54 | Top rail |
| 55 | Wooden Bracket |
| 56 | Only tightening joints by applying fevicol and wooden plugs |
| 57 | Table Centre 900x450mm (FD-225, FD-274)Removing existing unserviceable wooden components from Table Centre 900x450mm (FD-225, FD-274) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 58 | Leg |
| 59 | Top/Bottom rail |
| 60 | Stiffener |
| 61 | Only tightening joints by applying fevicol and wooden plugs |
| 62 | TABLE 900x600mm WITH/WITHOUT DRAWER (FD-223/224/283 /284)Removing existing unserviceable wooden components from Table 900x600mm with/without drawer (FD-223/224/283/284) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 63 | Leg |
| 64 | Top rail |
| 65 | Ply wood 6mm thick |
| 66 | Brass knobs |
| 67 | Front side of Drawer made out of Prelaminated particle bd 18mm thick with teak wood beading |
| 68 | Only tightening joints by applying fevicol and wooden plugs |
| 69 | BIN SOLIED LINEN (FD-244) Removing existing unserviceable wooden components from Bin soiled linen (FD-244) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 70 | Leg |
| 71 | Stiffener |
| 72 | MS Hinges 100mm |
| 73 | Plywood (Veneer) teak shade 6mm thick both side and top of door |
| 74 | CHAIR DINING (FD-279) Removing existing unserviceable wooden components from Chair Dining (FD-279) and supply and fix new componets made out of first class hard teak wood all as shown in drawing and all as specified and as directed by Engr-in-charge. |
| 75 | Front Leg |
| 76 | Rear Leg |
| 77 | Back |
| 78 | Front Rail |
| 79 | Stiffener |
| 80 | Only tightening joints by applying fevicol and wooden plugs |
| 81 | CHAIR DINING MESS (FD-357)Removing existing unserviceable wooden components from Chair Dining Mess (FD-357) and supply and fix new componets made out of first class hard teak wood all as shown in drawingand all as specified and as directed by Engr-in-charge. |
| 82 | Front Leg |
| 83 | Rear Leg |
| 84 | Front/Back Rail |
| 85 | Side Rail |
| 86 | Stiffener |
| 87 | Synthetic foam 50mm 32 density covered wih tapestry /rexin for seat not less than Rs.280/mtr |
| 88 | Synthetic foam 50mm 32 density covered wih tapestry /rexin for back not less than Rs.280/mtr |
| 89 | Only tightening joints by applying fevicol and wooden plugs |
| 90 | CHAIR EASY (FD-229) Removing existing unserviceable wooden components from Chair Easy (FD-229) and supply and fix new componets made out of first class hard teak wood all as shown in drawing and all as specified and as directed by Engr-in-charge. |
| 91 | Front Leg |
| 92 | Rear Leg |
| 93 | Front/Back Rail of seat and back |
| 94 | Handle |
| 95 | Stiffener |
| 96 | Only tightening joints by applying fevicol and wooden plugs |
| 97 | Chair Easy Cushioned (FD-358) Removing existing unserviceable wooden components from Chair Easy Cushioned (FD-358) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 98 | Front Leg |
| 99 | Rear Leg |
| 100 | Front/Back Rail of seat and back |
| 101 | Side Rail |
| 102 | Stiffener |
| 103 | Handle |
| 104 | Synthetic foam 50mm 32 density covered wih tapestry /rexin for seat not less than Rs.280/mtr |
| 105 | Synthetic foam 50mm 32 density covered wih tapestry /rexin for back not less than Rs.280/mtr |
| 106 | CHAIR WRITING (FD-250/280) Removing existing unserviceable wooden components from Chair Writing (FD-250/280) and supply and fix new componets made out of first class hard teak wood all as shown in drawing and all as specified and as directed by Engr-in-charge. |
| 107 | Front Leg |
| 108 | Rear Leg |
| 109 | Front/Back Rail |
| 110 | Stiffener |
| 111 | Handle |
| 112 | Back Support |
| 113 | Only tightening joints by applying fevicol and wooden plugs |
| 114 | HAT STAND WITH MIRROR (FD-233)Removing existing unserviceable wooden components from Hat Stand with Mirror (FD-233) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 115 | Peg Aluminium/Steel |
| 116 | Looking Mirror 300x440x5mm thick |
| 117 | Plywood (Veneer) teak shade 1mm thick on front side alround with 4mm thick teak wood beading. |
| 118 | Key plate |
| 119 | SIDE BOARD (FD-241) Removing existing unserviceable wooden components from Side Board (FD-241) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 120 | Top size 1220x455mm |
| 121 | Shutter left fitted with 50mm piano Hinges |
| 122 | Shutter Right fitted with 50mm piano Hinges |
| 123 | Brass knobs |
| 124 | Brass Lock 50mm with duplicate Keys |
| 125 | Plywood BWR grade 6mm thick |
| 126 | Legs |
| 127 | Bottom Stiffener |
| 128 | STOOL DRESSING (FD-252) Removing existing unserviceable wooden components from Stool dressing (FD-252) and supply and fix new componets made out of first class hard teak wood all as shown in drawing and all as specified and as directed by Engr-in-charge. |
| 129 | Leg |
| 130 | Side Rail |
| 131 | Stiffener |
| 132 | Only tightening joints by applying fevicol and wooden plugs |
| 133 | TABLE BED SIDE (FD-248)Removing existing unserviceable wooden components from Table Bed Side (FD-248) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 134 | Leg |
| 135 | Stiffener |
| 136 | Side |
| 137 | Shelf |
| 138 | Plywood BWR grade 4mm thick for back side |
| 139 | TV CUM VCR TABLE (FD/ARK-102) Removing existing unserviceable wooden components from TV cum VCR Table (FD/ARK-102) and supply and fix new componets made out of first class hard teak wood all as shown in drawing including tightening and all as specified and as directed by Engr-in-charge. |
| 140 | Glass 3mm size : 240x790mm |
| 141 | Top made out prelaminated particle board 18mm size : 900x600mm |
| 142 | Shutter frame size : 860x320mm made of 50x30mm first class hard wood with piano hinges. |
| 143 | Plywood BWR grade 6mm thick on back side.(Make:Kitply,Archidply, Greenply) |
| 144 | Sliding glass door 260x240x3mm |
| 145 | TABLE DRESSING LADIESRemoving existing unserviceable components of table dressing Ladies and supply and fix new components including tightening frame including polishing the new wooden surface to get smooth and glossy finish all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-251 |
| 146 | Leg |
| 147 | Side rail |
| 148 | Stiffener |
| 149 | Glass Plain 5mm thick |
| 150 | Aluminium Channel |
| 151 | Brass knobs |
| 152 | Looking Mirror 5mm thick |
| 153 | Plywood6mm thick |
| 154 | Plywood (Veneear)/ Sunmica teak shade 1mm thick both side |
| 155 | TABLE DRESSING GENTSRemoving existing unserviceable components of table dressing Gents and supply and fix new components all as shown in drawing including tightening frame complete all as specified and as directed by Engr-in-charge.Drawing No: FD-230 |
| 156 | Drawer |
| 157 | Brass knobs |
| 158 | Looking Mirror 5mm thick |
| 159 | Plywood 6mm thick |
| 160 | Plywood (Veneear)/ Sunmica teak shade 1mm thick both side. |
| 161 | BOARD NOTICE Supply and fix in repair soft board 12mm thick with green baize cloth for the rear side of board notice of size 2440x1220mm all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-99 |
| 162 | Supply and fix in repair 4mm thick glass for each door of board notice of size 2440x1220mm all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-99 |
| 163 | Supply and fix in repair soft board 12mm thick with green baize cloth for the rear side of board notice of size 900x600mm all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-99 |
| 164 | Supply and fix in repair 4mm thiick glass for each door of board notice of size 900x600mm all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-99 |
| 165 | Supply and fix in repair soft board 12mm thick with green baize cloth for the rear side of board notice of size 1830x1220mm all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-99 |
| 166 | Supply and fix in repair 4mm thick glass for each door of board notice of size 1830x1220mm all as shown in drawing complete all as specified and as directed by Engr-in-charge.Drawing No: FD-99 |
