|
| 1 | Schedule \"A\" Section - I |
| 2 | Excavation in trenches hard/dense not exc 1.5 mtr wide and not exc 1.5 mtr in depth (for taking up or laying of pipes/cables) and getting out and forming bottom surface to gradient complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 4 | Removing excavated surplus soils to a distance n.exc 50 mm and deposited at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 5 | M&L for cutting/dismantling carefully the existing Rising main MS Heavy duty flanged size 150mm dia for rerouting the pipe line from land slide zone near Kakkar hatti Village.Note: Serviceable MS pipe shall be used at site under respective items & unsv pipe shall be measured under sch. of credit as contractors property. |
| 6 | M&L for cutting/dismantling carefully the existing Rising main MS Heavy duty flanged size 200mm dia for rerouting the pipe line from land slide zone near Kakkar hatti Village.Note: Serviceable MS pipe shall be used at site under respective items & unsv pipe shall be measured under sch. of credit as contractors property. |
| 7 | M&L only for laying, jointing & fixing of old serviceable MS pipe of size 150mm in new route as directed by Engr-in-charge including necessary fittings ie. Heavy duty flange,nut bolts washers,rubber/fibre gasket of thickness 5mm all as specified and directed by Engr-in-Charge.Note: Cost of replacement of unsv heavy duty flange nut bolts washer heavy duty rubber/fibre gasket inclusive in the unit rate. Nothing will be paid extra in this account,only earth work will be paid seperately in respective item of schedule. |
| 8 | M&L only for laying, jointing & fixing of old serviceable MS pipe of size 200mm in new route as directed by Engr-in-charge including necessary fittings ie. Heavy duty flange,nut bolts washers,rubber/fibre gasket of suitable size all as specified and directed by Engr-in-Charge.Note: Cost of replacement of unsv heavy duty flange, nut bolts washer, heavy duty rubber/fibre gasket of thickness 5mm inclusive in the unit rate. Nothing will be paid extra in this account,only earth work will be paid seperately in respective item of schedule. |
| 9 | Supply, laying & Jointing of MS heavy duty ERW Flanged pipe of size 150mm dia as per IS-3589 (1981) wall thickness of pipe 5.0 mm. Laid in trenches in hard/dense soil under road culvert etc including all necessary fittings such as tee,bend,nipples, heavy duty flange,nut bolts, washer & rubber gaskets of thickness 5mm all as specified and directed by Engr-In-Charge.Note: (i) Cost of welding work ie flanged nut bolts, washer,gaskets etc inclusive of unit rate,nothing will be paid extra in this account,only earth work will be measured & paid seperatelly in respective item of schedule.(ii) Additional quantity of this item has been considered due to diverting of root. Hence, quantity of this item has been taken in schedule of credit. |
| 10 | Supply, laying & Jointing of MS heavy duty ERW Flanged pipe of size 200mm dia as per IS-3589 (1981) wall thickness of pipe 6.0 mm. Laid in trenches in hard/dense soil under road culvert etc including all necessary fittings such as tee,bend,nipples, heavy duty flange,nut bolts, washer & rubber gaskets of thickness 5mm all as specified and directed by Engr-In-Charge.Note: (i) Cost of welding work ie flanged nut bolts washer,gaskets etc inclusive in the unit rate,nothing will be paid extra in this account,only earth work will be measured & paid seperatelly in respective item of schedule.(ii) Additional quantity of this item has been considered due to diverting of root. Hence, quantity of this item has been taken in schedule of credit. |
| 11 | M&L for cutting/dismantling & taking out carefully the existing Air release valve of size 200mm dia from existing Rising main 200mm bore near kakkar hatti village and refixing the same in new location in diverted route of rising main 200mm bore all as specified & directed by Engr-in-Charge.Note: Cost of replacement of new rubber/fibre gasket of 5.00mm thick & suitable size of nut bolts & washer including jointing labour the same inclusive in the unit rate nothing will be paid in this account only earth work& repairs/ construction of chamber will be measured & paid seperately. |
| 12 | M&L for cutting/dismantling carefully the existing Air release valve of size 150mm dia from existing Rising main 150mm bore near kakkar hatti village and refixing the same in new location in diverted route of rising main 150mm bore all as specified & directed by Engr-in-Charge.Note: Cost of replacement of new rubber/fibre gasket of 5.00mm thick & suitable size of nut bolts & washer including jointing labour the same inclusive in the unit rate nothing will be paid in this account only earth work& repairs/ construction of chamber will be measured & paid seperately. |
| 13 | S&F of heavy duty high Pressure flanged end double ball type cast iron Air release valve of size 200mm bore with two air outlet 50mm dia bore fixing up in new location of existing rising main 200mm bore including nut bolts washer & rubber/fibre gasket of 5.0 mm thickness all as specified & directed by Engr-in-charge. |
| 14 | S&F of heavy duty high Pressure flanged end double ball type cast iron Air release valve of size 150mm bore with two air outlet 50mm dia bore fixing up in new location of existing rising main 150mm bore including nut bolts washer & rubber/fibre gasket of 5.0 mm thickness all as specified & directed by Engr-in-charge. |
| 15 | M&L for cutting only existing MS Rising main of 150mm bore & 200mm bore in new location & fixing of Air release Valve of size 150mm & 200mm bore in existing rising main all as specified & directed by Engineer in charge.Note : Cost of labour for cutting of existing rising main pipe & welding work & cost of heavy duty Flange nipple etc,nut bolts & washer inclusive in unit rate nothing will be paid extra in this account. Earth work will be measured & paid seperately in respective item of schedule. |
| 16 | M&L for dismantling of existing heavy duty Sluice valve of size 150mm bore from existing rising main 150mm dia near Kakkar hatti village of refixing the same after repacking the stuffing box of sluice valve spindle refacing, regrinding & refixing the same in new location diverted route of rising main 150mm bore all as specified & directed by Engr-in-Charge.Note: Cost of replacement of new gland packing,rubber/fibre gasket 5.0mm thick required Nos of nut bolts washer etc inclusive of unit rate, nothing will be paid extra in this item except earth work. |
| 17 | M&L for dismantling of existing heavy duty Sluice valve of size 200mm bore from existing rising main 200mm dia near Kakkar hatti village & refixing the same after repacking the stuffing box of sluice valve spindle refacing, regrinding & refixing the same in new location ie. diverted route of rising main 200mm bore all as specified & directed by Engr-in-Charge.Note: Cost of replacement of new gland packing,rubber/fibre gasket 5.0mm thick required Nos of nut bolts washer etc inclusive of unit rate, nothing will be paid extra in this item except earth work. |
| 18 | M&L for cutting only existing MS Rising main of 150mm bore & 200mm bore in new location & fixing of High pressure cast steel heavy duty Gate Valve of size 150mm bore & 200 mm bore in existing rising main all as specified & directed by Engr-in Charge.Note : Cost of labour for cutting of existing rising main pipe & welding work & cost of heavy duty Flange nipple etc,nut bolts & washer 5.0mm inclusive in unit rate nothing will be paid extra in this account. Earth work will be measured & paid seperately in respective item of schedule. |
| 19 | Supply,fixing & jointing of heavy duty high pressure cast steel Gate valve for 150mm bore with flanged ends class 300 ISI marked including Joints & jointing material such as nut bolts, washer, rubber/fiber gasket 5.00mm thick complete all as specified & directed by Engr-in-Charge. |
| 20 | Supply,fixing & jointing of heavy duty high pressure cast steel Gate valve for 200mm bore with flanged ends class 300 ISI marked including Joints & jointing material such as nut bolts, washer rubber/fiber gasket 5.00mm thick complete all as specified & directed by Engr-in-Charge. |
| 21 | M&L for dismantlling of unsv existing heavy duty high pressure Sluice valve/Gate valve of size 150mm bore from Gambhar pump house & radiana pump house & replacement of heavy duty High pressure cast steel gate valve of size 150mm bore with flanged ends class 300 ISI marked including joint & jointing material such as nut bolts,washer, rubber/fiber gasket 5.0 mm thick complete all as specified & directed by Engr-in Charge. |
| 22 | M&L for dismantlling of unsv existing heavy duty high pressure Sluice valve/Gate valve of size 200mm bore from Gambhar pump house & radiana pump house & replacement of heavy duty High pressure cast steel gate valve of size 200mm bore with flanged ends class 300 ISI marked including joint & jointing material such as nut bolts,washer, rubber/fiber gasket 5.0 mm thick complete all as specified & directed by Engr-in Charge. |
| 23 | M&L for dismantlling of unsv existing heavy duty high pressure Sluice valve/Gate valve of size 100mm bore from Gambhar pump house & radiana pump house & replacement of heavy duty High pressure cast steel gate valve of size 100mm bore with flanged ends class 300 ISI marked including joint & jointing material such as nut bolts,washer, rubber/fiber gasket 5.0 mm thick complete all as specified & directed by Engr-in Charge. |
| 24 | M&L for dismantlling of unsv existing heavy duty high pressure Sluice valve/Gate valve of size 80mm bore from Gambhar pump house & radiana pump house & replacement of heavy duty High pressure cast steel gate valve of size 80mm bore with flanged ends class 300 ISI marked including joint & jointing material such as nut bolts,washer, rubber/fiber gasket 5.0 mm thick complete all as specified & directed by Engr-in Charge. |
| 25 | Construction of brick masonary valve pit chamber of size (120x120x120)cm internal size with MS sheet 5mm thick & angle iron frame of size (50x50x6)mm duly painted with two coat of synthetic enamel paint over a coat of Red oxide Primer including lifting handle locking arrangment works and also excavation/earth work, PCC in foundation bricks work internal & external plaster including complete all as specified and directed by Engr-in charge. |
| 26 | M&L for demolition of existing valve pit chamber of any size and construction repair of valve pit chamber of size (120x120x120)cm internal size & replacement old unsv MS sheet cover of thickness 5.0mm thick MS Sheet & lifting handle locking arrangement, hinzes & replacement old angle iron frame, (50x50x6)mm & including plaster internal & external complete all as specified & directed by Engr-in-Charge. |
| 27 | M&L for dismantling of old unsv existing heavy duty NRV, 150mm bore from existing deleivery main of pump in Gambhar & Radiana pump house & fixing of new high pressure heavy duty cast steel NRV of size 150mm with flanged ends Class 300 ISI marked including Joints & Jointing material such as nut bolts washer & rubber/fiber gasket 5.0mm thick complete all as specified & directed by Engr-in-charge. |
| 28 | M&L for dismantling of old unsv existing heavy duty NRV, 100mm bore from existing deleivery main of pump in Gambhar & Radiana pump house & fixing of new high pressure heavy duty cast steel NRV of size 100mm with flanged ends Class 300 ISI marked including Joints & Jointing material such as nut bolts washer & rubber/fiber gasket 5.0mm thick complete all as specified & directed by Engr-in-charge. |
| 29 | M&L for dismantling of old unsv existing heavy duty NRV, 80mm bore from existing deleivery main of pump in Gambhar & Radiana pump house & fixing of new high pressure heavy duty cast steel NRV of size 80mm with flanged ends Class 300 ISI marked including Joints & Jointing material such as nut bolts washer & rubber/fiber gasket 5.0mm thick complete all as specified & directed by Engr-in-charge. |
| 30 | Supply only heavy duty 10mm thick mild steel flange of size 200mm bore as per ISI marked 3589 (1990) all as specified. |
| 31 | Supply only heavy duty 10mm thick mild steel flange of size 150mm bore as per ISI marked 3589 (1990) all as specified. |
| 32 | Supply only mild steel bolts,nut & suitable size of washer for size bolts 20mm dia 125mm long. |
| 33 | Supply only mild steel bolts,nut & suitable size of washer for size bolts 24mm dia 140mm long. |
| 34 | Supply only Heavy duty Rubber or Fibre board gasket for flanged joints of size 200mm bore pipe. |
| 35 | Supply only Heavy duty Rubber or Fibre board gasket for flanged joints of size 150mm bore pipe. |
| 36 | M&L for cement concrete in foundatin filling in mass concrete type D2 1:4:8, 40mm graded aggregrate for wall or supporting piller retaining wall any thickness,size or shape for rest to water supply main including plaster buttress & providing a clamp to hold the water mains fabricated with 50x6 mm flat Iron strip including all as specified & directed by Engr-in-charge. |
| 37 | M&L for making X&Y section of MS angle or channel including bracing clamps,back plate fabricated from structrual steel section including nut bolt washers welding cold & hot etc for holding the GI water main in hiliy area including one coat of primer & finishing coat of synthetic enamel paint all as specified & directed by Engr-in-Charge.Note: Earth work & concreting/PCC work shall be measured & paid seperately in respective item of schedue. |
| 38 | S&F rolled section Fe-410W Gde E 250 quality A as in main & cross beam ISMB 300 hip & Jack rafters purlins where connected to common rafters & running rails & guides for fixing in wall for purpose of lifting of pump,motor & other heavy machinery item of Radiana pump house all as directed & specified by Engr-in-charge.Note: (i) 2 Nos ISMB 300 length 7.0 RM each lenght to be fixed in wall of Radiana pump house. |
| 39 | M&L for cutting & making hole in brickwall for fixing of ISMB 300 each length 7.0 RM in wall of Radiana pump house including all necessary masonary,plastering,painting finishing work all as specified & directed by Engr-in-Charge. |
| 40 | Amount of credit of Rs. 289175.00 for retrived old material as mentioned in Schedule \"A\" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
