|
| 1 | CODE NO: 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar |
| 2 | CODE NO: 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil. |
| 3 | CODE NO:2.27: Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete. |
| 4 | CODE NO :4.1.10: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size). |
| 5 | CODE NO : 6.1.2: Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | CODE NO: 6.4.2: Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | CODE NO: 6.13.2: Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | CODE NO:5.2.3: Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars ,piers , abutments , posts and struts etc.upto floor five level excluding costof centering , shuttering , finishing and reinforcement - 1:2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20mm nominal size) |
| 9 | CODE NO: 5.9.1: Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete |
| 10 | CODE NO : 5.12:Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands,copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering , shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 11 | CODE NO : 5.22.6: Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more |
| 12 | CODE NO : 13.1.1: 12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand). |
| 13 | CODE NO: 13.2.1 : 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand) |
| 14 | CODE NO:11.3.1:Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. |
| 15 | CODE NO : 13.37.1: White washing with lime to give on even shade - New work (three or more coats). |
| 16 | CODE NO : 13.43.1: Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer |
| 17 | CODE NO : 13.46.1: Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm) |
| 18 | CODE NO : 10.25.2: Steel work welded in built up sections /framed work , including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets,gates and similar works |
| 19 | CODE NO : 13.50.3: Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. |
| 20 | CODE NO : 13.61.1: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. |
| 21 | CODE NO.9.165.1B: Providing and fixing of 65mm Godrej Navtal lock of 7 levers with 3 keys etc complete |
| 22 | CODE NO.15.18: Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts,cutting rivets ,welding etc.including dismembering and stacking within 50 metres lead |
