|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30m. from the foundation trenches. |
| 2 | Cement concrete with 4 cm. gauge approved stone ballast approve coarse sand and cement in the proportion of 1:4:8 in foundation including supply of all materials labour and T&P etc. required for proper completion of the work. |
| 3 | M-150 Brick work in 1:6 (one cement & six coarse sand) (1.25 F.M.) mortar in foundation and plinth including supply of all materials, labour & tools & plants etc required for proper completion of the work.0.23 cm thick wall |
| 4 | M-150 Brick work in 1:4 (one cement & 4 cores sand) (1.25 F.M.) mortar in foundation and plinth including supply of all materials, labour & tools & plants etc required for proper completion of the work. |
| 5 | Concrete with 4 cm gauge stone ballast fine sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundations and under floors supply of all materials, labour & tools & plants etc required for proper completion of the work. |
| 6 | R.C.C. work with cement approved coarse sand and 2 cm. Gauge approvedstone grit in proportions of 1:1.5:3 in T. Beam, Slab Roof and R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid. |
| 7 | R.C.C. work with cement approved coarse sand and 2 cm. Gauge approvedstone grit in proportions of 1:1.5:3 in raft foundation and footing excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid. |
| 8 | M-150 Brick work in 1:6 (one cement & six Corse sand) (1.25 F.M.) mortar in wall of one brick thick super structureincludingnecessary cutting and molding of bricks required so extra labour added. |
| 9 | M-150 Brick work in 1:4 (one cement & four Corse sand) (1.25 F.M.) mortar in half brick thick super structureincludingnecessary cutting and molding of bricks required so extra labour added. |
| 10 | 2 cm thick cement plaster plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3 mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and T&P etc. required for proper completion of the work |
| 11 | 12 mm thick plaster on walls cost of 1:6 cement and fine sand mortar (1 cement : 6 fine sand) |
| 12 | Extra for providing and mixing water proofing material in cement mortar in proportion recommended by manufactures. |
| 13 | Earth work in cutting in embankment in ordinary soil excavation to be in the from of regular pits not exceeding 0.50 mtr. In depth and earth work in embankment to be in 20 cm layers includingramming and dressing the surface to required levels and slop and also including 1.5 meter lift and 30 meter lead the earth from cutting to be used in making embankment or to be deposited as spoil bank with in 30 better distance as directed by Engineer in charge. (including Royalty) |
| 14 | 2.5 mm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 cm graded approved stone grit, laid in panels finished with 3 mm floating coat of neat cement of cement and marble dust in ration of 5:1 as specified over and including 8cm thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm gauge in the proportion of 1:4;8 and removing any overtopping mortar at the joints of the panels if any and givingthem a uniform finish including supply of all materials, labor and T & P etc. required for completion of the work. |
| 15 | Granolithic Marble without base concrete flooring 4 cm thick consisting of 2 cm thick layer of 1 part cement, 2 parts of approved coarse sand and r parts of 2 cm graded approved stone chips including 5 mm thick surface coat with ordinary cement black and white or grey or mixed marble chips passing 3mmbut retained on 1.5 mm mesh screen in proportion of 1:2 as specified or directed by the engineer in charge and polished by hand or machine and finally finished with French Mansion Polish or any other approvedpolish including supply of all materials, labor and T & P etc. required for completion of the work. |
| 16 | Mild steel in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel its wastage bend hooks and authorized overlapping shall be measured and including cost of binding. |
| 17 | Supply and fixing 6 mm (1/4\") China White glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointingand polishing complete including supply of all materials labour, tools & plants etc. required for proper completion of the work. . |
| 18 | M. S. or iron work of small size and sections such as Grills & Stair case railingetc. brought to required from including supply of steel bolts, nuts wastage, etc. and their fixing required for proper completion of the work |
| 19 | M. S. or iron workin angle iron work in angle Iron (40x40x6) Door and window frame including cutting, welding & wastage including supply of all material labour T&P etc required for proper completion of the work. |
| 20 | Cast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement, approved coarse sand and 2 cm gauge approved stone grit in the proportion of 1:1.5:3, excluding cost a reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all other materials, labour and T & P etc. required for proper completion of the work. The rate excludes making of drip course which shall be paid extra. |
| 21 | Providing and laying of Rubber molded (grey colour) Interlocking Concrete Block Pavements having thickness 80mm including leveling and dressing of surface to required level and slope, spreading and moisting 30 m thick local sand on bend filling joints with local sand on bend filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. |
| 22 | White glazed earthen ware (European type) W.C. Pan 580 mm Dia |
| 23 | White glazed earthen ware (Indian type) W.C. Pan 510 mm Dia |
| 24 | Flat back or angular front Lipper urinal basin of white glazed earthen ware 465x355x265 mm |
| 25 | Wash hand basin 550x400 mm size of white glazed earthen ware (22\"x16\") |
| 26 | Providing and fixing 10 litter (full flush) capacity white PVC low level flushing cistern made of vitreous china with all fitting and fixtures complete |
| 27 | P.V.C. Waste Pipe for Urinal and W.H.B. |
| 28 | P.V.C. connection 450 mm Long with two brass units 15 mm Dia |
| 29 | C.P. Brass Waste Jali for Wash Basin |
| 30 | R.S. bracket for flushing cistern/sink & was hand basin. |
| 31 | C.P. Bib Cock heavy quality 5 mm dia 200 gm(Gem Mikado/Encess\"s Williams or eqv.) |
| 32 | C.P. Pillar cock with Brass Spindle 15 mm Dia |
| 33 | C.P. Stop Cock heavy quality 5 mm dia 200 gm (Gem Mikado/Encess\"s Williams or eqv.) |
| 34 | C. P. Urinal Cock heavy quality 5 mm dia 200 gm (Gem Mikado/Encess\"s Williams or eqv.) |
| 35 | PVC water storage tank Syntax or equivalent |
| 36 | G. I. Pipe Class B 25 mm dia |
| 37 | Full way Gate Valve 25 mm dia |
| 38 | G. I. Tee 25 mm Dia |
| 39 | G. I. Elbow 25 mm Dia |
| 40 | G. I. Socket 25 mm Dia |
| 41 | B.G. I. Union 25 mm Dia |
| 42 | PVC ball float valve with brass & union complete 15 mm |
| 43 | G. I. Pipe Class B 15 mm dia |
| 44 | G. I. Elbow 15 mm Dia |
| 45 | G. I. Socket 15 mm Dia |
| 46 | G. I. Nipple 50 mm long 15 mm Dia |
| 47 | S.W. gully trap 130x100 mm size |
| 48 | PVC Pipe 110 mm dia ISI Marked |
| 49 | PVC Bend 100 mm dia |
| 50 | PVC Socket 100 mm dia |
| 51 | Mirror of Atul make with Indian Polish of 600x450 mm dia Size with beveled edge |
| 52 | Supply and fixing of fully panel of commercial quality ISI marked ply wood flush shutters 32 mm thick (excluding cost of fitting) (Single Leaf) including cleats and stops and including fixing &adjustment of hinges, bolts locks, handles spring and other fittings but excluding their supplyand including painting with two coats of black Japan on all iron fittingif necessary.includingfixing the glass panes with putty and brad. Glass to be 4 mm thick. Fitting with necessary screws to be supplied by the dept. |
| 53 | Making Khurra 45cm x 45 cm with C.C. 1:2:4 average 5 cm thick including a coat of neat cement also including all material, labour T & P required for proper completion of the work. |
| 54 | Distempering (three coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even with Plaster Plaster of Paris or approved approved synthetic synthetic material and sand papered smooth including cost of all materials. |
| 55 | Finishing walls with water proofing cement paint of approved make and quality on new work with three coats to give an even shade including supply of all material, labour, tools and plants etc. required for proper completion of the work. |
| 56 | Painting or varnishing new work in small areas with one coat of ready mixed priming paint and three coat of approved superiorquality ready mixed paint or varnish including supply of all materials , labour and tools and plants etc. required for proper completion of the work. paint to be used should confirm the I.S.I. No. 103-1950. |
| 57 | G.I. Reducing Tee 20x20x15 mm dia |
| 58 | Fixing 100mm size \"P\" or \"S\" trap for water closet squatting pan including jointing the trap with the pan & pipe in cement mortar 1:1(1Cement:1Fine sand) |
| 59 | 3.8 to 4.7 mm thick plan glass(best Quality, cut to size) including wastage |
| 60 | Supply & Laying of SW pipe in 600 mm length perfect made 150 mm dia |
| 61 | PVC Pipe 110 mm dia ISI Marked |
| 62 | Class 150 Brick bats including supply of all material labour T&P etc as required for proper completion |
| 63 | Supply of following materials required for construction and installation of Submersible Pumping Plant,of approved quality and ISI marked complete as per direction of the Engineer In Charge,including supply of all material, labour, T & P etc. as required for proper completion of the work but excluding their cartage from store to the site of work. (PWD SI NO : 23.1.1.1) 300 mm dia |
| 64 | Supply of following materials required for construction and installation of Submersible Pumping Plant,of approved quality and ISI marked complete as per direction of the Engineer In Charge,including supply of all material, labour, T & P etc. as required for proper completion of the work but excluding their cartage from store to the site of work (.a) Supply, assembling, lowering and fixing in vertical positionin bore well UPVC Medieum well casing (CM) pipe/well screen (RMS) with Ribs of 100 mm nominal sizedia conformint to IS 12818 including required hire and labour Charges fitting and assoessories etc all complete all depth. (PWD SI NO : 23.3.1, P-72) |
| 65 | Supply of following materials required for construction and installation of Submersible Pumping Plant,of approved quality and ISI marked complete as per direction of the Engineer In Charge,including supply of all material, labour, T & P etc. as required for proper completion of the work but excluding their cartage from store to the site of work.(B) Supply of 40 mm dia G.I. Pipe of medium quality including cutting, threading,Socket, Elbow, Tee, Union Etc. with proper compeletion of the work. (PWD SI NO : 18.12.5), P-58) |
| 66 | Supply of following materials required for construction and installation of Submersible Pumping Plant,of approved quality and ISI marked complete as per direction of the Engineer In Charge,including supply of all material, labour, T & P etc. as required for proper completion of the work but excluding their cartage from store to the site of work.( C ) Supply and fixing of Pumping Plant including starter control pannel, cable complete in all respect with complete required material , labour T & P etc. (UP Jal Nigam : 8.1 ) |
| 67 | (C) Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actural requirement, all complete as per direction of Engineer-in-charge. (PWD SI NO : 23.8 ) |
| 68 | Development of tube well in accordance with IS : 2800 (Part I) and Is : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by\"V\" notch method of any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc, all as per requirement and direction of Engineer-in-charge (PWD SI : 23.12) |
| 69 | P/F 100 mm size MS Clamp of required Dia to the top of casing of Submersible Pump as per IS 2800 (Part -1) Including necessary Bolts & Nuts of required size Compelete (PWD SI NO : 23.14.1) |
