Tender For Construction Of Community Hall/Clubs At Imphal City
Tender Value
1.14 Crore
Estimated cost
Bid Submission
22 Jul 2024
0 days left
EMD
2.30 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
imphal → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall/Clubs At Imphal City
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Jul-2024 | NIT No.MOBEDS-09/2024 Turnover Modifications | Technical Bid | 22-Jul-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head:-Earth Work |
| 2 | Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposed ofexcavated earth, lead upto 50m and lift upto 1.5m, as directed by the Engineer-in-charge.(a) All kind of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth sides of ,foundation etc. in layer not exceeding 20cm. in depth consolidation each deposited layer by ramming and watering lead unto 50m. lift unto 1.5m. |
| 4 | Supplying and filling in plinth with sandy soil under floors including watering,ramming, consolidating and dressing complete. |
| 5 | Sub-Head:-Concrete & RCC Work |
| 6 | Providing and laying cement concrete of specified gradeexcluding the cost of centering and footing shuttering- All work upto plinth level:-1:4:8 (1cement : 4c/sand: 8 graded stone agro. 40 mm nominal size.) |
| 7 | Providing and laying in position specific grade of reinforced cement concrete,excluding the cost of centerring,shuttering,finishing and reinforcement-All work up to plinth level -1:1.5:3 ( 1 cement :1.5 c/sand: 3 graded stone aggrt. 20 mm nominal size.) |
| 8 | Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :t in 1:1.5:3( 1 cement :1.5 course sand: 3graded stone aggrt. 20mm nominal size) |
| 9 | RCC work in beams,suspended floors, roof having slope up to 15 degree landing,balconies, shelves ,chajjas,lintel,bands,plain window sill,staircase and spiral stair cases upto floor five levelexcluding the cost of centering, shuttering and reinforcement.a) 1:1.5:3 (1 cement: 1.5 course sand: 3 graded stone aggt. 20mm nominal size. |
| 10 | Sub-Head:-Reinforcement |
| 11 | Reinforcement for RCC work in bending, binding and placing in position complete in Tor steel bars. |
| 12 | Sub-Head:-Form-Work |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 14 | a) Foundation, footings, bases of columns etc. and mass concrete |
| 15 | b)Column, Pillars,Piers, Abutments,Posts and Struts |
| 16 | c) Lintels, beams, Plinth beams, girders, bressumers and cantilevers. |
| 17 | Sub-Head: Brick Work |
| 18 | Brick work with first class common burnt clay F.P.S. (non-modular) brick in foundation &plinth in cementmortar 1 : 4 ( 1cement : 4 coarse sand). |
| 19 | Half brick with 1st classcommon burnt clay F.P.S. (non-modular) brick in foundation &plinth in cementmortar 1 : 4 ( 1cement : 4 coarse sand). |
| 20 | Providing wood work in frames of doors, windows, clerestorywindows andotherframes wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia. And length (hold fast or dash fastener shall be paid for seperately(a) Local best quality Tolhao wood |
| 21 | Providing and fixing panelled or paneled and glazed shutters for doors,windowsand clerestory Windows i/c ISI marked M.S.butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately, all complete as per direction of Engineer-in-charge.(a) Local best qualityTeak wood - 35 mm thick shutters. |
| 22 | P/F M.S. grills of reqd pattern to wooden frames etc. with M.S. flats at reqd spacing and framed all round bars with round headed bolts and nuts or by screws ornamentalgrill |
| 23 | Providing & fixing ISI marked oxidisedM.S. Sliding bolts with screws etc. Complete.(a) 250X16mm. |
| 24 | Providing & fixing ISI marked oxidised M.S. handles confirming to IS:4992 with necessary screws etc.complete. |
| 25 | Providing and fixing M.S. hooks and eyes. |
| 26 | P/L M.S. fan clamps Type-I of 16mm dia bent to shape during laying i/c hooked ends in R.C.C. slab during laying i/c painting the exposed portion of loop all per standard design complete. |
| 27 | Sub Head: Flooring& Finishes |
| 28 | Cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate ) finished with floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete-40 mm thick with 20 mm nominal sized stone aggregate. |
| 29 | Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement:3 coarse sand ) finished with a floating coat of neat cement -18 mm thick. |
| 30 | 12 mm cement plaster 1:4 (1 cement: 4 coarse sand ) finished witha floating coat of neat cement. |
| 31 | 15mm cement plaster 1:4 ( 1 cement : 4 coarse sand ) |
| 32 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer. |
| 33 | Finishing walls with water proffing cement paint of required shade: New work (two or more coats applied @ 3.84kg/10sqm). |
| 34 | Applying priming coat with ready mixedpink or grey primer of approved brand and manufacture on wood work.(Hard and soft wood). |
| 35 | Paintingwood work with Deluxe Multi surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer appliedd @ 0.75 ltr/10 sqm of approved brand or manufacture. |
| 36 | Providing and fixing on wall face G.I. Rain water pipe and filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cem : 2 fine sand). c) 150 mm diameter. |
| 37 | Steel work in built up tabular(round,square or rectangular tubes etc.) trusses including cutting, hoisting, fixing in position and applying a priming coat ofapprovedsteel primer including welding and bolted including special shaped washers etc. complete (a) Electric resistant or induction butt welded tube |
| 38 | Providing and fixing precoated galvanised iron profile sheet ( size shape and pitch of corrugation as approved by Engineer-in-Charge) with zinc coating 120 gram per sqm as per IS:277 in 240 mpa steel grade, 5-7 microm epoxy primer on both side of the sheet anad polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micron minimum to avoid scratches during transportation and should be supply in single length upto 12 meter or as desired by Engineer in charge. The sheet shall be fixwd usung self drilling/self tapping screw of size (5.5x55 mm ) with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafter and trusses and including cuttung to size and shape wherever required with- Precoated galvanised iron profile sheet 0.35 mm thick |
| 39 | Providing and fixing precoated galvanised steel sheet roofing accessaries with zinc coating 120 gram per sqm as per IS:277 in 240 mpa steel grade, 5-7 microm epoxy primer on both side of the sheet anad polyester top coat 15-18 microns. Using shef drilling/self tapping screws or with polymer coated J or L hook, bolts and nuts and G.I. seam bolt anad nuts, G.I. plain anad bitumenet washers complete- Gutter ( 600 mmoverall girth).- Precoated galvanised iron profile sheet 0.35 mm thick |
| 40 | Providing wood work in frames of false ceiling, partition etc, sawn & put up in positiona) Local best quality Tolhao |
| 41 | P/F 20mm plank as eave board with (a) Uningthou wood. |
| 42 | Sub-Head:-Sanitary Work, |
| 43 | Providing and fixing white vitreous china dual purpose closet suitable for use as squatting pan or European type water closet ( Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 44 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brasss unions and G.I clapms complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.- 610 x 400 x 380 mm |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting anf making good the walls wherever required:White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer. |
| 46 | Single hole basin mixer |
| 47 | Providing and fixing laboratory sink white glazed vitreous china (Indian make) with R.S. or C.I. brackets painted white a pair of 15 mm C.P. brasstap and C.P. brass waste of standard pattern 32 mm diameter M.I./C.P. brass traps and unions complete i/c cutting and making good the walls Indian fittings. 450 x 300 x 150 mm |
| 48 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device ( handle lever) conforming to IS : 7231, with all 10 litre capacity- White. |
| 49 | Providing and fixing PVC trap with 100mm inlet and 100 mm outlet of self cleaning design with screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors. |
| 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete.A) Semi rigid pipe - 40mm |
| 51 | Providing and fixing 600 x 450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete. |
| 52 | Providing and fixing PTMTshelf 440mm long, 124mm widthand 36mm height of approved quality and colour weighing not less than 300 gms. |
| 53 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P.brass screws with concealed fittings arrangement of approved quality and colour.- 450 mm long towel rail with total length of 495mm,78mm wide and effective height of 88mm,weighing not less than 170 gms. |
| 54 | Providing and fixing toilet paper holder : C.P. brass |
| 55 | Providing and fixing PTMT liquid soap container 109mm wide,125mm high and 122mm dsitance from wall of standard shape with bracket of same materials with snap fittings of approved quality and colour weighing not less than 105gms. |
| 56 | Providing and fixing CP Brass single lever telephonic wall mixer of quality and make as approved by Engineer in charge.A) 15mm nominal dia. |
| 57 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:A) 150mm nominal dia. |
| 58 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. Brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required:a) 510 x 1040 mm bowl depth 225mm |
| 59 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breath 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 60 | Providing and fixing UPVC soil, waste,rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. - 110mm dia. |
| 61 | Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work) |
| 62 | 25 mm diameter |
| 63 | 40 mm diameter |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer.Concealed work, including cutting chases and making good the wall etc. - 25mm nominal outer dia pipes. |
| 65 | Providing and fixing C.P. brass angle valve of basin mixer and geyser points of approved quality confirming to IS:8931. - 15mm nominal bore |
| 66 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931.- - 15mm nominal bore |
| 67 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main: -25mm nominal bore. |
| 68 | P/F water storage tank(syntex) with 400mm dia. normal based GI piped (overflow) tube 25mm normal GI inlet 15mm norminal GI oultet tube i/c hoisting ht of 10m above a) 1000 capacity. |
| 69 | Providing & fixing of Water Motor Pump set includingconnection, cutting, threading the pipe etc.all in complete installation. |
| 70 | Providing and fixing G.I. union in G.I. pipesi/c cutting and threading the pipe and making long screws etc. complete (new work). |
| 71 | a) 25mm dia nominal bore |
| 72 | a) 40mm dia nominal bore |
| 73 | Providing & fixing ball valve (brass) of approved quality, high or low pressure with plastic floats complete.- 25mm nominal bore |
| 74 | Providing & fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.- 25mm niminal bore, weighing not less than 62 gms. |
| 75 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including , cutting and threading the pipe etc. complete. - 25mm to 40 mm |
| 76 | IEI |
| 77 | Wiring for light pt./power plug with 2x4mm2 FRLS PVC insulation copper conductor single core cable in surface/recessed medium class steel conduict along with 1 no. 4mm2 PVC insulated copper conductor single core cable for loop earthing etc as reqd. |
| 78 | Wiring for circuit/ sub main wiring along withearth wire (the following sizes) of FRLS PVC insulation in surface/ recess mediul class steel conduit etc as reqd. |
| 79 | 1. 2x1.5 mm2+1x1.5mm2 earth wire |
| 80 | 2. 2x2.5mm2+1x2.5mm2 earth wire |
| 81 | 3. 2x4mm2+1x4mm2 earth wire |
| 82 | S/F bulk head fitting suitable for 100 W lamp complete with all accessories i/c connection as reqd. |
| 83 | S/F brass battern/angle holder i/c connection |
| 84 | Supply of 48\" sweep (1200mm) AC ceiling fan (Make Bajaj/Usha or Crompton). |
| 85 | S/F 12\" (305 mm) dia light duty exhaust fan complete with all accessories (Usha /Bajaj/Orient) etc. |
| 86 | S/F 8 way, (4+24 way) single door TPN prewired, sheet MCB distribution board, 415V on surface /recessd complete with loose wire box, terminal connection of all incomming and outgoing circuit duly previewd with suitable size FRLS PVC insulatede copper conductor up to terminal block, tinned copper bus bar, neutral link, earth bar,din bar, detachable gland plate, interconnection power painted i/c earthing etc as reqd (but without MCB / RCCB / Isolator). |
| 87 | P/F 4 pole 160 Amp. MCCB of break back capacity 25 KA in the existing cubical panel board i/c drilling holes in the cubical panel and making connection as reqd. |
| 88 | S/F 8 way, (2+8 way) single door pole & neutral, prewired, sheet steel MCB distribution board, 240V on surface/recessd complete with loose wire box, terminal block, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnection i/c power painted (but without MCB / RCCB / Isolator) earthing etc as reqd. |
| 89 | S/F (Following rating) double pole 240Visolator in the existing MCB DB complete with connection, testing & commission as reqd. |
| 90 | a.40 amp |
| 91 | b.63 amp |
| 92 | S/F 5-32 amp rating 230 V\"C\" curves MCB for inductive load of the following poles in the existing MCB DB complete with connection, testing & commission as reqd. |
| 93 | a. Single pole |
| 94 | S/F ( following piano type switch socket) on the existing switch box/cover i/c connection as reqd. |
| 95 | 1.5/6 amp switch |
| 96 | 2.3pin5/6 amp socket outlet |
| 97 | 3. 15/16 amp switch |
| 98 | 4. 6 pin 15/16 amp socket outlet |
| 99 | S/F Stepped type electronic regulator on the modular plate switch box i/c connetion but excluding modular plate as per reqd. |
| 100 | Supply and fixing Pre coated electronic box type luminaries with decorative and caps FTL 1x36/40 lamp complete with accessories i/c connection etc as reqd. |
| 101 | S/F 12W LED Bulb. |
| 102 | 15w LED downlighter |
| 103 | Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonaries enclosure and watering pipe etc with charcoal or coke and salt) as reqd. |
| 104 | P/L earth connection from earth electrode with 4mm dia copper wire in 15mm dia GI pipe as reqd. |
| 105 | P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd. |
| 106 | P/F 200 amp TPN stand ground on load change over switch (compact design) 415/500 V including connection etc as required. |
AI Tender Summary
Tender Timeline
Jul 10, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 22, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 22, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender