Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-08-2024 | Due Date Extended for tenders closing on 31-07-2024 | Admin Corrigendum Date Extend | 04-09-2024 |
| 2 | 24-07-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-07-2024 |
| 3 | 12-07-2024 | amendment1 | BOQ | 24-07-2024 |
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15cm deep in hard/dense soil complete all as specified and directed. |
| 2 | Excavation in trenches in soft/disintegrated rock, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed. |
| 3 | M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed. |
| 4 | M&L RCC M-30 design mix using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basements slabs, under reamed piles and mass concrete and similar works complete all as specified and directed. |
| 5 | M&L RCC M-30 design mix using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts andsimilar works complete all as specified and directed. |
| 6 | M&L for RCC M-30 design mix using 20 mm graded stone aggregate in Beams, lintel bands, cantilevers etc complete all as specified and directed. |
| 7 | M&L RCC M-30 design mix using 20 mm graded stone aggregate as in slab supported on wall, beams and coloumns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar works complete all as specified and directed. |
| 8 | M&L for RCC M-30 design mix using 20 mm graded stone aggregate as in chajja complete all as specified and directed. |
| 9 | Use and Waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finish surface of concrete complete all as specified and as directed. |
| 10 | Use and Waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygon rough finished surface of concrete complete all as specified and as directed. |
| 11 | Use and Waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 12 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed. |
| 13 | Use and Waste Formwork to chajja including edges rough finished surface of concrete complete all as specified and as directed. |
| 14 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 15 | M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 16 | M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:4 complete all as specified and as directed. |
| 17 | M&L for rendering on fair faces of brick work or concrete surface or block masonary, 15 mm thick in two layers of 10 + 5 mm in CM 1:4, top layer of 5 mm thick mixed with liquid water proofing compound as per manufacturer instructions finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately |
| 18 | Supply only liquid water proofing compound |
| 19 | M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:6 finished fair and even complete all as specified and directed. |
| 20 | M&L 5 mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for preperation of new surface wall/ceilling by applying ready mix preparatory wall care puttyby scrapping/ rubbing, applying two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion complete all as specified and directed. |
| 22 | M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed. |
| 23 | M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed. |
| 24 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 25 | M&L for 100 mm thick Cement concrete 1:3:6,type C-2 using 40mm graded stone aggregate as in sub base of floor/ path etc. complete all as specified. |
| 26 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering complete all as specified and directed. |
| 27 | M&L joint free Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screeding in CM 1:4 complete all as specified |
| 28 | M&L glazed ceramic white tiles 350 x 250 x 6 to 7 mm/ 450 x 350 x 6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 29 | S&F in position powder coated (any colour and thickness of coating not less than 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 30 | S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodized aluminium fittings such as hinges type B-21 -100mm long (3 No.), suitable handle (2 No.) complete all as specified and directed. |
| 31 | S&F 5.5 mm thick sheet glass ordinary quality and fixing with rubber/ aluminium beads and provsion of glazing pins where required fixed in aluminium windows/ doors/ partition/ ventilators complete all as specified and directed. |
| 32 | S&F aluminumpowder coated deco grill make DG-104 (10 mm thick section) incl \"C/F/L\" channel alround grill complete all as specified and directed. |
| 33 | S&F factory made solid PVC door frame of size 50 mmx 100 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed. |
| 34 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed. |
| 35 | S&F 100mm size stainless steel, butt hinges, medium weightISI marked and fixed with screws complete all as specified and directed. |
| 36 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long ISI marked and fixed complete all as specified and directed. |
| 37 | S&F aluminumalloyanodized sliding door bolt 300mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 38 | S&F alumunium handle, fabricated type, anodised 150 mm long ISI marked complete all as specified and directed. |
| 39 | S&F vitreous china squatting pan \"Orissa\" pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete all as specified and directed. |
| 40 | S&F Viterous China wash down water closet pan (pedestal pattern) with \"P\" or \"S\" trap, white (excluding fixing bolts, flushing cistern and flush pipe) and includingPlastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 41 | S&F 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC with and including 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed. |
| 42 | S&F vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including 32mm dia CP brass waste coupling, waste pipe and 600 mm long, PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed. |
| 43 | S&F pillar taps, long nose cast copper alloy with capston heads, fancytype, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 44 | S&F stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 45 | S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with minimum 1 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.Make:- Agmeco/Sona/GEM/Kohler |
| 46 | S&F long body bib taps, two way, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 47 | S&F vitreous china urinals half stall type complete including urinal spreader pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified and directed. |
| 48 | S&F 15 mm bore Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed to GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 49 | S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position, fixed with tank nipple, union complete all as specified and directed. |
| 50 | Supply, fixing, laying & testing CPVC pipes 20 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 51 | Supply, fixing, laying & testing CPVC pipes 25 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 52 | S&F 25 mm diameter Ball brass valves high pressure with polythene float screwed for iron pipe or brass ferrule and fixed as specified. |
| 53 | S&F 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 54 | S&F 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed. |
| 55 | S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed. |
| 56 | S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed. |
| 57 | S&F PVC (SWR) bend 110 mm dia, any radius with access door complete all as required and as directed. |
| 58 | S&F PVC (SWR) bend 75 mm dia, any radius with access door complete all as required and as directed. |
| 59 | S&F PTMT grating doom 100 mm dia (min wt 25 Gms) complete all as specified and as directed. |
| 60 | S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 61 | M&L for machine pressed rubber moulded precast coloured chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 62 | M&L for 100 mm thick Cement concrete 1:4:8,type D-2 using 40mm graded stone aggregate as in sub base of floor/ path/tiles etc. complete all as specified. |
| 63 | M&L for 75mm thick cement concrete type C2 1:3:6 (using 40 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction and necessary formwork complete all as specified and directed. |
| 64 | M&L for laying water proofing treatment using 4mm thick APP modified membrane consisting five layers membrances with features as specified weighing not less than 3.5 kg per sqm reinforced with non woven polyester fiber @ 160gm/Sqm laid over a coat of cold applied bituminous primer @ 0.20 kg/sqm by torching the membrance and sealing the over lap by 100 mm length side and 150 mm width side all as per manufacturer instructions including joints and changes in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement curved well before laying membrance, all as per manufacturer instructions complete all as specified and directed. Note: (i) Irrespective of lap the net covered area will only be measured for payment. (ii) Rate is inclusive of APP membrane, SBR Latex |
| 65 | M&L for rendering/screed bed10 mm thick on roof surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed. |
| 66 | Returning filling in including spreading watering and well raming in layer excedding 25 cm each in any type of soil/rock complete all as specified and directed. |
| 67 | Removing excavated soil/rock to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.5m above the starting point complete all as directed. |
| 68 | M&L for 150 mm bore reinforced concrete pipes, class NP2, complete with collars, laid and jointed in cement mortar 1:1 as in drains and similar works complete all as specified and directed. |
| 69 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in concrete foundation bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed. |
| 70 | M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.), shelves etc. and similar works set in cement mortar 1:6 complete all as specified and directed. |
| 71 | M&L for RCC hume pipe (ready made) Septic Tank suitable for 25 incl PVC vent pipe with cowl-110 mm dia including all required earthwork in soft/ disintegrated rock or hard/ dense soil, PCC 1:3:6 in bottom of tank and returning filling, removal of surpuls soil etc. complete all as specified and directed. |
| 72 | M&L for brick work with old size sub class B bricks of class designation 75, straight or curved on plan exceeding 6m mean radius laid dry complete all as specified and directed. |
| 73 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 74 | S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-290-(Gde.E-165) complete all as specified and directed. |
| 75 | M&L for Drilling holes in RCC/block masonary for bolts, pipes, etc. exc 60 mm but not exc. 100 mm dia and making good disturbed surface in cement mortar 1:4 complete all as specified and directed. |
| 76 | M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 77 | M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 78 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 79 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and directed. |
| 80 | S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.50mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof coveringfixed with self taping screws (length & girth as fixed) complete all as specified and directed. |
| 81 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 82 | M&L aluminium powder coatedGI frame (snapgrid) of size 605 x 605 mm, main runner 38 x 24 mm sheet thickness 0.4 mm, cross tee 28 x 24 mm sheet thickness 0.3 mm and wall angle 24 x 24 x 0.3 mmfixed with hangers 6 mm dia GI (upto 1200 mm lenght) adjusting level type fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fastners 12.5 mm, 40 mm long of standard section as per manufacturers instructions complete all as specified and directed. |
| 83 | S&F for PVC insulation panels10mm thick with EPS stuck to 1mm thick PVC sheet suitably placed in false ceiling to aluminium GI grid fixed with screw as per manufacturers instructions complete all as directed |
| 84 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 Cm thickness (below or above ground level) complete all as specified and directed. |
| 85 | Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in hard rock complete all as specified and directed. |
| 86 | Excavation in trenches in hard rock, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed. |
| 87 | Demolition of Brick Work/ sone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed. |
| 88 | M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 89 | M&L for providing damp proof course 40 mm thick in cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 90 | PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, lintel upto 1.5 m clear span etc including necessaryweathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed. |
| 91 | M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 92 | M&L for applying one coat of alkali resistant primer on plasteredsurfaces over 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation the surfaces complete all as specified and directed. |
| 93 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly plastered surface of wall including preparation of surface complete all as specified. |
| 94 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 95 | M&L for 25 mm thick (average) Cement concrete 1:2:4,type B-1 (using 20mm graded stone aggregate) as in sub base of floor etc. complete all as specified and directed. |
| 96 | M&L Vitrified Ceramic tiles 9 to 10 mm thicklight shade (alsoin patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM1:4 complete all as specified and directed. |
| 97 | M&L for Vitrified Ceramic tiles 9 to 10 mm thicklight shade polished on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4complete all as specified and directed. |
| 98 | M&L joint free Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screeding in CM 1:4 complete all as specified |
| 99 | M&L joint free Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4complete all as specified and directed. |
| 100 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified. |
| 101 | Supply, fixing, laying & testing CPVC pipes 16 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 102 | Dismantling water tank capacity exc. 500 ltr but n.exc. 1000 ltr complete all as specified and directed. |
| 103 | S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position, fixed with tank nipple, union complete all as specified and directed. |
| 104 | S&F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 105 | S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 106 | S&F in repair pillar taps, long nose cast copper alloy with capston heads, fancytype, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 107 | S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC with and including 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed. |
| 108 | S&F in repair 600x450mm, 6 mm thick bevelled edge mirror of selected quality glass mounted on 6mm thick building board (AC) sheet, aluminium frame and fixed to wooden plug with chromium plated brass screw washer complete all as specified and directed. |
| 109 | S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with minimum 1 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.Make:- Agmeco/Sona/GEM/Kohler |
| 110 | S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including 32mm dia CP brass waste coupling, waste pipe and 600 mm long, PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed. |
| 111 | S&F in repair chromium plated brass shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified. |
| 112 | S&F 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges with hooks fixed with rawl plug complete all as specified and directed. |
| 113 | S&F PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 114 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed. |
| 115 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed. |
| 116 | S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium window/ ventilator fixed type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws complete all as specified and directed. |
| 117 | S&Faluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters complete all as specified and directed. |
| 118 | S&F aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed completeall as specified and directed. |
| 119 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor having overall length of cover plate 140 mm completeall as specified and directed. |
| 120 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed completeall as specified and directed. |
| 121 | M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 122 | S&F 2nd class HW35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 123 | S&F 125 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 and fixed completeall as specified and directed. |
| 124 | S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed. |
| 125 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed. |
| 126 | S&F aluminium anodised barrel tower bolt of extruded section 125 mm long ISI marked and fixed complete all as specified and directed. |
| 127 | S&F alumunium handle, fabricated type, anodised 125 mm long ISI marked complete all as specified and directed. |
| 128 | S&F aluminumalloyanodized sliding door bolt 200mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 129 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 130 | S&F PVC (SWR) pipe 110 mm bore, single socketed, type \"A\" in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed. |
| 131 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in concrete foundation bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110 mm dia pipe complete all as specified and directed. |
| 132 | S&F PVC (SWR) bend 110 mm dia, any radius complete all as required and as directed. |
| 133 | S&F PVC (SWR) bend 75 mm dia, any radius complete all as required and as directed. |
| 134 | S&F 125/110 mm PVC (SWR) gully trap including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed. |
| 135 | S&F in repair 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed. |
| 136 | M&L for reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 completeall as specified and directed. |
| 137 | M&L for point wiring complete for one light/fan fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 Sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia \"medium grade\" PVC concealed conduits ISI marked and fittings and replacement of modular metal flush box, modular white cover plate with frame, blanking plate and making good to the disturbed surfaces to match the existing complete all as specified and directed including 1.50 Sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.Note- (i) Rates include the cost of blanking plate, modular plate, modular boxes and covers of suitable modules as required at site.(ii) Modular box, plate and cover shall be of same make as of switch//socket/regulator. |
| 138 | All as per item No. 137 above but for one 5 pin 5/6 Amp socket outlet point on an independent board. |
| 139 | All as per item No. 137 above but for one 5 pin 5/6 Amp socket outlet point on Same board. |
| 140 | All as per Item No. 137 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 4 Sqmm and green colour earth cable of size 4 Sqmm. |
| 141 | S&F modular type switch one way 6 Amps, 230 Volt, 1 Module complete all as specified and directed. |
| 142 | S&F modular type switch one way 16 Amps, 230 Volt, 1 Module complete all as specified and directed. |
| 143 | S&F modular type socket 6 Amps, 2/3 pin, 230 Volt, 2 Module complete all as specified and directed. |
| 144 | S&F modular type socket 6 Amp/16 Amps, 2/3 pin combined, 230 Volt, 2 Module complete all as specified and directed. |
| 145 | S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50 mm dia complete all as specified and directed. |
| 146 | S&F MCB single pole 240 volts, \"C\" curve of rating from 06 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 147 | S&F MCB SPN 240 volts, \"C\" curve of rating 40 to 63 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 148 | S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection SPN, 240 Volts, 8 way, including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. |
| 149 | S&F LED tube light fitting surface mounted integrated type with 20 watt LED having minimum 100 lumens/watt electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. |
| 150 | S&F exhaust fan (Metal body) of 300 mm sweep, AC single phase 230/240 volts, heavy duty1400 RPM complete with louvers including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, grouting anchor bolts/fastners and making good to disturbed surfaces to match the existing complete all as specified and directed. |
| 151 | Excavation in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed. |
| 152 | Supply & laying double walled corrugated (DWC) HDPE full rounded pipe conforming to IS 16205 Pt-24 of approved colour complete with fittings for cable protection of size 38 mm inner dia and 50 mm outer dia complete all as directed. |
| 153 | Supply and Laying including testing in floor/trenches or fixed on pole/wallXLPE LTUG cable PVC insulated, bedded, galvanised steel strip or wire armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 10 Sqmm 2 core complete all as specified and directed. |
| 154 | Material and labour for replacement of GI tubing medium grade 50 mm bore for passing through cables laid under the floor, along the wall or along the pole complete all as specified and directed . |
| 155 | Supply, fixing, laying & testing CPVC pipes 25 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings laid in treanches complete all as specified and directed |
| 156 | Cutting/drilling existing cast iron/GI pipe line 40 to 80 mm bore pipe for inserting necessary fittings such as tee, elbow, reducer etc. in position for making branch connection including threading,excavation& earth work complete all as specified and directed. |
| 157 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.NOTE: Credit for this items shall be made as per conditions separately. |
| 158 | S&F modular typefan regulator, electronic stepped type, 230 Volt, 2 Module complete all as specified and directed. |
| 159 | Supply & Fixing in replacement Recess mounting LED fittings 36 watts, suitable for 600 mm x 600 mm (2ftx2ft) modular/POP/Gypsum ceiling, luminaire with white powder coated CRCA housing with LEDs. seamless front frame with fat white high transmission acrylic cover 230V, complete in all respect & accessories internally prewiredincluding connecting up with twin copper twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 160 | Supply and fixing22W 4ft long LED batten light fitting with 2.5 KV voltage surge protection ,PF >0.9 complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 161 | Supply and fixing10W 2ft long LED batten light fitting with 2.5 KV voltage surge protection ,PF >0.9 complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 162 | S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection TPN, 415 Volts, 8 way, Vertical type, including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. |
| 163 | S&F MCCB 160 Amps current carrying capacity 36 KA , AC 415 Volts four pole with magnetic/ thermal fixed setting complete all as specified and directed. |
| 164 | S&F MCB single pole 240 volts, \"C\" curve of rating 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 165 | S&F MCB TPN 415 volts, \"C\" curve of rating 40 to 63 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 166 | S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25 mm dia \"medium grade\" PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 167 | S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 10 sqmm nominal cross sectional area and one run of 10 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25 mm dia \"medium grade\" PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 168 | S&F in replacement sheet metal enclosures, single pole and neutral with socket, plug top and one single pole MCB 20 Amps, 240 V complete all as specified and directed. |
| 169 | M&L in replacament of existing old unsvearthing with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steelconnected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5 mm graded stone aggregate reinforced with 6 mm dia round bar @ 75 mm C/C both ways with MS handle 8 mm dia, plastering 15 mm thick CM (1:6) externally upto 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl. excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing complete all as specified an directed. |
| 170 | S&F in repair 4mm dia galvanised iron or steel wire Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed. |
| 171 | S&F exhaust fan (Metal body) of 380 mm sweep, AC single phase 230/240 volts, heavy duty1400 RPM complete with louvers, making hole in brick/Block masonary wall of suitable size to fix exhaust fan including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, grouting anchor bolts/fastners and making good to disturbed surfaces to match the existing complete all as specified and directed. |
| 172 | S&F exhaust fan (Plastic body) of 250 mm sweep, AC single phase 230/240 volts, heavy duty1400 RPM complete with louvers including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, grouting anchor bolts/fastners and making good to disturbed surfaces to match the existing including taking down old fan and deposited to MES store yard complete all as specified and directed. |
| 173 | S&F brushless direct current (BDLC) ceiling fan 1200 mm sweep, 5 star rating complete with blades and other accessories, single phase, 230 V and making connection with sheathed 3 core cable of size 0.75 Sqmm flexible copper conductor wire complete all as specified and directed. |
| 174 | S&F wall mounting fan 400 mm sweep complete with blades and other accessories, single phase, 230 V, 5 star rating complete all as specified and directed. |
| 175 | Taking down Split type AC of any capacity and kept in safe custody/ deposit MES Store till the completion of Bldg Work and refixing the same after servicing complete all as specified. |
| 176 | S&F in repair test point terminal block made of gun metal 75 mm x 75 mm x 25 mm drilled and screwed including three Nos. 8 mm dia. 25 mm long hexagonal head screws and including provision of suitable MS box made out of 3 mm thick MS sheet to accommodate the terminal block complete all as specified and directed. |
| 177 | S&F in repair aluminium strip 25 x 3.15mm fix on porcelin insulator for roof conductor and down conductorabove groung level as lightining conductor ( including insulator) for building / store shed complete all as specified and directed. |
| 178 | S&F in repair air termination single pointed AL rod 12mm dia 300mm long complete all as specified and directed. |
| 179 | M&L for replacament of existing old unsvearthing with steel earth plate electrode ofsize 600x600x6mm thick buried directly in ground to a depth not less than 1.25mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 25 x 4 mm as earth lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate, 40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI watering pipe light grade with funnel and wire mesh, complete all as per SSR with PCC chamber, 50mm thick 30 x 30 cm size RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way with angle iron frame allround made of AI 40 x 40 x 4 mm, adequate qty of charcoal dust and salt layers all around the earth plate, including earth workin any type of soil, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as shown on electricplate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted). |
| 180 | S&F UPS for min 3 hrs back up single phase AC input 160 to 260 V and output 230 ± 1% of capacity3 KVA including all connectionscomplete all as specified and directed. Make:- V-Guard/Microtek/Amaron/Luminous |
| 181 | Supply & laying double walled corrugated (DWC) HDPE full rounded pipe conforming to IS 16205 Pt-24 of approved colour complete with fittings for cable protection of size 50 mm inner dia and 63 mm outer dia complete all as directed. |
| 182 | Supply and Laying including testing in floor/trenches or fixed on pole/wallXLPE LTUG cable PVC insulated, bedded, galvanised steel strip or wire armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 50 Sqmm 3.5 core incl taking down existing cable complete all as specified and directed. |
| 183 | S&F in replacementLED 90 Wsecurity light made up of pressure die cast aluminiumhousing with high power LED as lighting source and lens embedded PC coverhavingtop opening separately including driver compartment with IP66 protectionfixng on pole complete all as specified and directed. |
| 184 | Cutting the existing road/ Hard standing for passing pipe/ cable and making good the disturbed surfaces by using PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in mass concrete complete all as specified exists complete all as specified. |
| 185 | Supply and installing Split type AC indoor/ outdoor unit complete with cordless remote control and in build air ionizer and plasma filter for better indoor air quality with minimum 3 star rating and ISEER rating of 3.8 of capacity 1.5 TR with copper tubing, condenser, non-inverter compressor, low noise, stabilizer free operation within 230 Voltage range, digital temperature display, self diagnosis all necessary fixing arrangements like fixing brackets etc. complete all as directed and as per manufacturer instructions.Note:- Extra copper tubing, water pipe etc. required to complete the installation will be measured and paid separately under respective items herein after. Make:- Voltas/LG/Bluestar |
| 186 | S&F voltage stabilizer 5 KVA for automatic operation, single phase, copper wounded, naturally air cooled indoor type & designed for input variation between 130 volts to 280 volts with out put voltage stabilized at 230 volts with accuracy of +/- 2.5% complete all as directed.Make:- VGuard/ Mircotek/ Servomate |
| 187 | S&F sheet metal enclosures, single pole and neutral with socket, plug top and one single pole MCB 20 Amps, 240 V complete all as specified and directed. |
| 188 | S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia \"medium grade\" PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 189 | S&F PVC insulated multi stranded copper conductor cable 4 Sqmm 3 corecomplete all as specified and directed. |
| 190 | S&F insulation for copper tubes for spilt type air conditioner, insulation type superlon of size 3/8 inch complete all as specified and directed. |
| 191 | S&F insulation for copper tubes for spilt type air conditioner, insulation type superlon of size 5/8 inch complete all as specified and directed. |
| 192 | S&F 6 mm thick copper tubing of size 5/8 inch dia of superior quality for refrigeration suction/discharge line for spilt type air conditioner complete all as specified and directed. |
| 193 | S&F 6 mm thick copper tubing of size 5/8 inch dia of superior quality for refrigeration suction/discharge line for spilt type air conditioner complete all as specified and directed. |
| 194 | S&F PVC flexible pipe 20 mm dia as in drain water pipe complete all as specified and directed. |
| 195 | M&L for point wiring complete for one exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia \"medium grade\" PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 2 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3 mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed. |
| 196 | S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed. |
| 197 | S&F exhaust fan (Metal body) of 225/230 mm sweep, AC single phase 230/240 volts, heavy dutycomplete with louvers including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, grouting anchor bolts/fastners and making good to disturbed surfaces to match the existing complete all as specified and directed. |
| 198 | Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed. |
| 199 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, conveting window into door openings, etc. or cutting out defective brickwork for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc., to store and rubbish not exc. 50 m complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
