Various line work in M&Runder the EDSD-IV, Amanpur Kasganj in the jurisdiction of EDD (Rural), Kasganj. - Safe Carriageof followingpoles Store Center or from any other place to the respective site of work through the Kachha Pacca roadincluding the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work. 2 PCC Pole 8.5 / 9 mtr long 3 ST Poles 11/13 mtr 4 Cartage of line material viz Weasal Conductor, GI earth wire, Cross Arm, Angle, Channel, Insulator, Clamps & other line material from Store Centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work. (Dist. 0 to 50 Kms.). 5 Replacement of damaged pole by opening of all existing accessories and conductor from damaged pole properly and removal of damaged pole and erect the new pole at same place including fixing of all existing accessories and conductor on the new pole etc. as per direction of supervising engineer. Its including the cost of all labour, T&P etc. (including carriage of damaged pole to store) required for proper completion of work. 6 PCC Pole 8.5/ 9 mtr. Long 7 ST Poles 11/13 mtr 8 Erection & Grouting of single support as per RESSPO Manual including of the cost of labour,T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 9 PCC Pole 8.5/9.0 mtr. Long 10 ST Poles 11/13 mtr 11 Replacement of damaged double pole by opening of all existing accessories and conductor from damaged pole properly and removal of damaged pole and erect the new pole at same place including fixing of all existing accessories and conductor on the new pole etc. as per direction of supervising engineer. Its including the cost of all labour, T&P etc. (including carriage of damaged pole to store) required for proper completion of work. 12 Straightening of tilted PCC/ST Pole 13 Erection & grouting of 8.5 mtr Long PCC Pole as double pole including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 14 Erection & grouting of ST Pole as double pole including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 15 Erection, grouting and nuzzling of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual. 16 Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work. 17 Removal of existing conductor from damaged line / pole including opening of jumpers etc. as per requirement of site and it carriage from site to store as per direction of supervising Engineer. 18 Laying, sagging, stringing and jumpering / binding of following Conductor on the pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. 19 ACSR Dog Conductor 20 ACSR Weasel Conductor 21 Re-sagging of loose 11 KV / L.T. lines as per direction of supervising engineer. Its includes the cost of labour, T&P etc. required for proper completion of work. 22 ACSR Dog Conductor 23 ACSR Weasel Conductor 24 LT A. B. Cable (different size) 25 Laying, spreading, Lifting & Final sagging of Aerial Bunched Cable of following size including fixing of All accessories as per RESSPO manual & as per direction by Supervising Engineer. 26 3x50+1x35+1x16 sq.mm. 27 3x95+1x70+1x16 sq.mm. 28 3x120+1x90+1x16 sq.mm. 29 Fixing of LT Distribution box including making connections of distribution box with LT mains by piercing clamps for Aerial Bunched Cable. The work will also include the opening of the service connection of the consumer and its connecting in distribution box. 30 Cutting & Chopping of tree branches for proper clearance of HT/LT Line 31 Cartage of dismantlled line material / scrap viz ST Pole Weasal Conductor, GI earth wire, Cross Arm, Angle, Channel, Insulator, Clamps & other line material from site to Store Centre as per direction of supervising engineer through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work. (Dist. 0 to 50 Kms.). 32 Providing & Fixing of nut bolt off size on vendors cost. 33 Providing & Fixing of holding clamp for ST/PCC pole one vendors cost.
