Tender For Replacement Of Udd And Wbe Fan Rotor, paradeep-Odisha

Tender For Replacement Of Udd And Wbe Fan Rotor 2000154443 10 10 10 IMPELLER REFITTING 1 NO 20 IMPELLER REFITTING 1 NO Email : Subhra.Swain@amns.in Contact : 9438184199 Name : Swain, Subhra - AM/NS India - Mechanical Item Details : ANNEXURE-1 1. REMOVAL OF UPPER CASING OF WBE AND UDD FANS. 2. REMOVAL OF OLD ROTORS ASSEMBLY AND SHIFTING THE OLD ROTOR STO ITS DESIRED. 3. NEW ROTORS SHIFTING TO BE DONE FROM STORE TO SITE. 4. REMOVAL OF BEARINGS, PLUMMER BLOCKS, AND COUPLING <(>&<)> CHECK THE CONDITIONS OF BEARINGS, PLUMMER BLOCKS, AND COUPLING REPLACEMENT (IF REQUIRED, AS PER SITE). 5. ALL THE REMOVED MATERIALS TO BE KEPT PROPERLY AND SECURELY. SPECIAL CARE TO BE TAKEN WHILE REMOVING THESE PARTS. 6. ALIGNMENT OF COUPLING TO BE DONE. 7. WHILE STARTING THE JOB, IF ANY STRUCTURE TO BE REMOVED THAT IS TO BE FIXED AGAIN AS IT WAS BEFORE. 8. MINIMUM 6 MONTHS WORKMANSHIP GUARANTEE TO BE PROVIDED BY THE CONTRACTOR. 9. HOUSEKEEPING TO BE DONE AFTER FINISHING THE JOB. 10. ROTORS WEIGHT – 40 TON. EACH 11. FABRICATION OF STORAGE STAND AND LIFTING TACKLES FOR ROTOR LIFTING TO BE MADE READY AND TO BE CERTIFIED BY COMPETENT AUTHORITY (LOAD TEST TO BE CARRIED OUT 1.25 TIMES THE MAXIMUM WEIGHT). 12. ALL THE JOBS TO BE EXECUTED IN ACCORDANCE WITH AMNS SAFETY STANDARD AND ANY DEVIATION WILL BE HEAVILY PENALISED. 13. ALL TOOLS AND TACKLES ARE IN CONTRACTOR’S SCOPE. ALL LIFTING TOOLS AND TACKLES WHICH ARE TO BE USED AT SITE DURING THE JOB EXECUTION MUST HAVE A VALID TEST CERTIFICATE AND IT MUST BE SUBMITTED PRIOR TO START THE JOB. 14. ALL THE FITMENT TO BE DONE AS PER DRAWING AND SITE ENGINEER’S INSTRUCTION. 15. JOBS TO BE CARRIED OUT WITHIN THE STIPULATED TIME FRAME AND ANY DELAY IN IT WILL BE CONSIDERED AS LD AND IT WILL BE PENALISED AS PER AMNS POLICY. 16. ANY WORK WHICH HAS NOT BEEN MENTIONED HERE BUT REQUIRED TO DO FOR FUNCTIONING OF THE SYSTEM SHOULD BE DONE BY CONTRACTOR WITHOUT CHARGING ANY EXTRA WORK. VENDORS SCOPE: TOOLS <(>&<)> TACKLES, CUTTING HOSE SET, WELDING MACHINE, GRINDING MACHINE, CHAIN BLOCK, MANUAL RATCHET, SHIFTING TOOLS AND EQUIPMENT.

Refer document

Refer document

Refer document