|
| 1 | Cleaning of all types ofblockage of Nahni traps/floor traps/bottle traps, blockages of WC\"s, rain water pipes and similar works, complete all as specified and directed.Note :- 1. Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM incl all Tools and Plants. Each labour shall intertain complaints everyday in working hours.2.The supervisor of Contactor shall take all complaints from the Complaint Cell and do the all on same day.3. Feedback shall be given by the contractor/supervisor to concened JE from all aspect. |
| 2 | Cleaning/clearing of sewage line (including manholes) 100mm to 350mm bore of any description, under ground, any depth, removing any type of blockage including desilting,descaling and de-chocking from drain manually or combined high pressure water jetting cum suction (vacuum) type machine, having facility of high pressure vacuum, including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed off, complete all as specified and directed.(Note : The quoted rate shall deemed to be included removing of manhole cover and refixing the same after cleaning.) |
| 3 | Dewatering/Desludging & cleaning of manholeof any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges, plastic bags etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits, covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging, complete all as specified and directed. |
| 4 | Bailing out the sludge water including other foreign materials fromseptic tanks / manholes of various sizes and depthsas required by manually or by pumping with suitable pumping machinery and removing the same within 50 m distance and deposited in a pit to be excavated and covered with two layer of bamboo mating, disinfecting the pit with sufficient quantity of bleaching powder and earth filling upto 30cm depth of pit including removing and refixing of manhole covers as required, complete all as specified and directed. Note: (i) Excavation and earth work for pit, bamboo matting, temporary barricade of the pit and providing sufficient bleaching powder shall deemed to be included in the unit quoted rate (ii) Hiring charges and cost of fuel for sewage pump shall deemed to be included in the unit quoted rate and nothing extra shall be paid on this account. |
| 5 | Taking out/Bailing out the sludge / semi solid materials including other foreign materials fromseptic tanks / manholes of various sizes and depths upto 1.5mas required by manually or by pumping with suitable pumping machinery and taking out sludge/ semi solid materials / any other foreign materials from septic tanks etcand removing the sludge within 50 m distance and deposited in a pit to be excavated and covered with two layers of bamboo mating and earth filling upto 30cm depth of pit including removing and refixing of manhole covers as required, complete all as specified and directed.Note: (i) The cost of Excavation and earth work for pit, bamboo matting, temporary barricade of the pit and providing sufficient bleaching powder shall deem to be included in the unit quoted rate (ii) Hiring charges and cost of fuel for sewage pump shall deemed to be included in the unit quoted rate and nothing extra shall be paid on this account |
| 6 | Cleaning of soil waste pipe (cast iron/PVC)100mm borelaid in groundany slope or gradient and depth 3 mtr by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed |
| 7 | Cleaning of soil waste pipe (cast iron/PVC) above groun level, 75mm/100mm bore by roding, taking out all residue from the lines including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed. |
| 8 | All as per item No. 7.00 here-in- before but embedded in ground or floor, complete all as specified and directed. |
| 9 | Cleaning/clearing of IWC/ EWC, gully trap /floor trap/kitchen sinkincluding CI pipe / PVC pipe upto first manholeby roding, taking out all residue including waste and testing by pouring water after cleaning, complete all as specified and directed. Note: Cleaning of PVC/CI pipe from first floor / ground floor/ embedded in floor or fixed to wall shall deemed to be included in the unit quoted rate. |
| 10 | Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house, pole/stay or cble trnches etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil, complete all as specified and directed. |
| 11 | Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing serviceable tiles to store and rubbish off the premishes, complete all as specified and directed. |
| 12 | M& L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 13 | M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 15 | S&F in repair vitreous china squatting pan,\"Orissa pattern\"white, size 580x 440 mm with integral foot rest,\"P\" or \"S\" trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed. |
| 16 | S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed. |
| 17 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 18 | Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 19 | Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles , complete all as specified and directed.. |
| 20 | M&L for brick work with sub class \"B\" bricks old size, burnt clay bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) including demolition of brick work, complete all as specified and directed. |
| 21 | All as per item No. 20.00 here-in-before but except bricks, complete all as specified and directed.Note : (i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition. |
| 22 | M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces of wall in CM (1:4),mixed with integral water proofing compound top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.) |
| 23 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 24 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed |
| 25 | M & L for pre-cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover and similar iitems with plain faces and set in CM (1:4), complete all as specified and directed. |
| 26 | S & F mild steel TMT bars 6mm to 8mm dia (Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed. |
| 27 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1, smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed. |
| 28 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1, smooth finished and reforming benching as required for 200mm bore pipe, complete all as specified and directed. |
| 29 | M & L for PCC (1:4:8), type D 2, (using 40mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore, complete all as specified and directed. |
| 30 | M & L for PCC (1:4:8), type D 2, (using 40mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore, complete all as specified and directed. |
| 31 | Demolition and breaking up 150mm above drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and directed. |
| 32 | Demolition and breaking up 200mm above drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and directed. |
| 33 | S&F 150mm bore reinforced concrete pipes, class NP2 laid and jointed complete with collar, complete all as specified and directed. |
| 34 | S&F 200mm bore reinforced concrete pipes, class NP2 laid and jointed complete with collar, complete all as specified and directed. |
| 35 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for like MH cover, bdrain pipe bed, hard standing etc, complete all as specified and directed. |
| 36 | M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling or mass/hard standing concrete, completeall as specified and directed. |
| 37 | Taking down PVC/CI (SWR) pipes 110mm from floors or walls, complete all as specified and directed. |
| 38 | Taking down PVC/CI (SWR) pipes 75mm from floors or walls, complete all as specified and directed. |
| 39 | S & F 110mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed. |
| 40 | S&F 110mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints laid in trenches or floor, complete all as specified and directed. |
| 41 | S & F 75mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed. |
| 42 | S&F 75mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints laid in trenches or floor, complete all as specified and directed. |
| 43 | S&Fin repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 44 | S&Fin repair of 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 45 | S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof for 75mm bore, complete all as specified and directed. |
| 46 | S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof for 100mm bore, complete all as specified and directed. |
| 47 | S & F 15mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old unserviceable GI water tubing including removing from site of work, complete all as specified and directed. |
| 48 | S & F 20mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old unserviceable GI water tubing including removing from site of work, complete all as specified and directed. |
| 49 | Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed. |
| 50 | S&F in repair 32mm bore brass, waste fittings, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cementand other end fixed, complete all as specified and directed. |
| 51 | S&F in repair grating doom 100mm dia of PTMT (minimum weight 25gms), complete all as specified and directed. |
| 52 | S&F in repair 15mm bore bib tap standard of PTMT any colourhigh pressure screwed for iron pipe & fixed (minimum weight - 90 gms), complete all as specified and directed. |
| 53 | S&F in repair of 32mm size PVC solid waste pipe forwash hand basin and sink 800mm long, complete all as specified and directed. |
| 54 | S&F in repairs for 15mm dia pipe, health faucet (ABS Body) mild steel chromium plated suitable with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed. |
| 55 | Demolition of unreinforced cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level), complete all as specified and directed. |
| 56 | M&L for 100mm thick PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate as in sub-base, sub floors, pavings, floors etc, complete all as specified and directed |
| 57 | M&L for 75mm thick PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate as in plinth protection/hardstanding etc, complete all as specified and directed |
| 58 | Dismantling fencing wire mesh, of any type including fillets, complete all as specified and directed. |
| 59 | Supply only chain link fencing made out of 4mm dia galvanised iron wire of mesh 75 mm x 75 mm/ 100 mm x 100mm size, made up to into mattress or cages, complete all as specified and directed. (Note : Per meter weight of chain link brought by the contractor shall be finalized through a BOO.) |
| 60 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provisition of binding wire etc, complete all as specified and directed. |
| 61 | Re-straining and fixing only old seviceable chain link to any type of standards, rails including securing or tying at crossing with and provision of galvanisrd mild steel wire staple of steel pins etc, complete all as specified and directed.(Note : Old serviceable chain link fencing obtained from dismantling shall be re-used.) |
| 62 | M&L for flush pointing to old brick work laid flat in CM (1:4) including racking out joint in floors, surfaces chanels etc, complete all as specified and as directed. |
| 63 | M&L for flush pointing to old brick work laid on edges in CM (1:4) including racking out joint in floors, surfaces chanels etc, complete all as specified and as directed. |
| 64 | Dismantling bricks (laid flat or on edge) laid,bedded and pointed in cement mortar as in floors, channels, kerbs aprons etc (each layer), complete all as specified & directed. |
| 65 | M&L for brick sub class \"B\" burnt clay brick, old size, laid flat in drain, bedded and joint in CM (1:6) and pointedin CM (1:3), complete all as specified and directed. |
| 66 | All as per item No. 65.00 here-in-before but except bricks, complete all as specified and directed.Note : (i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition. |
| 67 | M&L for brick sub class \"B\" burnt clay brick, old size, laid on edge in drain old size of brick bedded and joint in CM (1:6) and pointedin CM (1:3), complete all as specified and directed. |
| 68 | All as per item No. 6700 here-in-before but except bricks, complete all as specified and directed.Note : (i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition. |
| 69 | M & L for rolled mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 70 | S&F in repair for 900mm dia barb (unstretched) conseczal super razor punched tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing, complete all as specified and directed.Note (i) : No of circles - 51 turns per coil, weight of each coil with hessian pack 13 Kg (+ 0.5), coverage per coil - 8 RM, central core wire :- Made from 2.5mm dia (+ 0.05mm) GI - H.T.S.S wire as per IS -4454 Part l grade SM UTS : 1600N / sqmm with zinc coating of 240 gm per sqm, galvanized as per IS-2629, Razor punched strip - Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm per Sgm confirming to ASTM A-792 / A-792M with additional primer treatment of epoxy / polyurethane of 2-m micron thick and final paint top coat of certified green shed (BSL 139) by hot dipping process of 15 micron thick, length of barb 23.5mm (+1 mm), width of barb 18.6 mm (+ 1mm), centre to center pitch 36mm (+ 1mm), centre width 7.4 mm (+ 1mm), GI fixing accessories \"C\" clip 2mm wire diameter, 40mm long, 15mm center dia \"U\" clip 1mm thick, 28mm straightened length, \" J\" clip:- 31mm length, 8mm width, 1mm thick.(ii):- Running length of the fencing shall be measured for payment purpose. |
| 71 | S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed. |
| 72 | S&F in repair CP pillar tap, 15mm bore, fancy type, cast copper alloy, chromium plated, capstan head, screweddown high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed. |
| 73 | Supply and laying well burnt sub class \"B\" bricks, old size, laid in trenches perpendicular to UG cable, laid flat, (width of brick along the length of cable) over sand cushioning for cable protection, complete all as specified and directed. |
| 74 | Supply, filling in trenches, spreading, leveling sand cushioning 8cm below cable and 15cm above the cable punned down to 18cm for under ground cable, complete all as specified and directed.(Note : Punned thickness shall be measured for payment) |
| 75 | Supply and laying in trenches/fixed on wall 50mm bore GI tubing, lightgrade, with necessary fittings such as bend, tee, elbow etc complete for protection of LT UG cable including taking up/down old unserviceable GI tubing, complete all as specified and directed. |
| 76 | Supply and laying in trenches/fixed on wall 80mm bore GI tubing, lightgrade, with necessary fittings such as bend, tee, elbow etc complete for protection of LT UG cable including taking up/down old unserviceable GI tubing, complete all as specified and directed. |
| 77 | M&L for XLPE insulated, armoured, heavy duty electric cable with aluminimum conductor, 1100 Volts grade, in trenches/fixed on wall for cross- sectional area of cable of size from 16 Sqmm 4 core including taking down old unserviceable UG cable of any description, complete all as specified and directed. Note: Excavation and earth work shall be measured and paid separately. |
| 78 | All as per item No. 77.00 her-in- before but cable size 25 Sqmm 4 core, complete all as specified and directed. |
| 79 | All as per item No. 77.00 her-in- before but cable size 35 Sqmm 3.5 core, complete all as specified and directed. |
| 80 | All as per item No. 74.00 her-in- before but cable size 50 Sqmm 3.5 core, complete all as specified and directed. |
| 81 | All as per item No. 77.00 her-in- before but cable size 70 Sqmm 3.5 core, complete all as specified and directed. |
| 82 | All as per item No. 77.00 her-in- before but cable size 95 Sqmm 3.5 core, complete all as specified and directed. |
| 83 | All as per item No. 77.00 her-in- before but cable size 185 Sqmm 3.5 core, complete all as specified and directed. |
| 84 | All as per item No. 77.00 her-in- before but cable size 240 Sqmm 3.5 core, complete all as specified and directed. |
| 85 | All as per item No. 77.00 her-in- before but cable size 300 Sqmm 3.5 core, complete all as specified and directed. |
| 86 | Horizontal boring under the road (with manual method) below 1m from the road surface and dia of hole not exc. 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed. |
| 87 | M & L for power cable route marker pre-cast RCC of size 1000mm x 300mm x 50mm with top curved portion, 8mm dia round bar reinforcement, emboshing of letter (MES-LT CABLE) both faces of pre-cast during casting of RCC pre-cast, applying two coats of external emulsion paint with primer approved colour and painting of emboshed surface with black colour including fixing of route marker with proper PCC (1:3:6) as in foundatiuon, complete all specified and as directed. |
| 88 | Horzontal directional drilling (HDD) Boring of holes under road, pavement, hard standing, Runway/ PTT by trenchless technology using ultra sounding technique and necessary machine including privison of HDPE pipe of sie not less than 100mm dia suitable for 0.4 mpa working pressure, complete all as specified and directed. |
| 89 | S&F factory fabricated busbar chamber outdoor type made out of 3.15mm thick CRCA sheet with powder coating of size not less than 1.00 x 0.45 x 0.90 forset of 04 copper busbar 400 Amps rating , supported with suitable size heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral, The Chambershall be fixed60cm above the normal ground level complete with PCC foundation (1:2:4 )type B2and fixing arrangement with angle iron 50 x 50 x 6mm, complete all as specified and directed. |
| 90 | S&F cable jointing kit for 1.1 KV grade cable for straight through jointcomplete with jointing material, heat shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, aluminium conductor cable of size 70 to 120 sqmm, complete all as specified and directed. |
| 91 | M&L for earthing of equipment complete with copper earth plate electrode 60 x 60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to existing earth leadstripby means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work PCC (1:2:6) type C-1 with suitable size of CI cover plate with angle iron frame and opening arrangement ) incl providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all aroundthe earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including copper earth strip 20 x 3.15mm, 40mm bore (medium grade) galvanized iron pipe up to earthing test point as directed, incl disposal of soil to a distance not exc 50 mtr and necessary testing on completion including taking down/dismantling of old unserviceable earthing of any description, complete all as specified and directed. Note : (i) Earth result after installation completely should be less than 5 Ohm.(ii) Copper earth strip upto 7.5m from earth electrode with suitable protection pipe shall deemed to be included in the unit quted rate. |
| 92 | Note: An amount of Rs.71,460.00 on account of Credit Schedule for schedule \"A\" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| 93 | Supply and fixing energy efficient ‘LED Flood Light120 W LED luminairewith Aluminium dia cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangment on wall/pole / surface and connecting cable up to nearest ceilign rose into flexible PVC conduit. Make : Crompton/Havells/ Surya/Philips |
