Tender For Special Repair / Renewal To Bldg No. 4 (Sdo Qtrs) Near Drill Ground At The Sikh Li Regt Centre At Fatehgarh Cantt
Tender Value
42.29 Lakhs
Estimated cost
Bid Submission
04 Sep 2024
0 days left
EMD
84580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
fatehgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair / Renewal To Bldg No. 4 (Sdo Qtrs) Near Drill Ground At The Sikh Li Regt Centre At Fatehgarh Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Jul-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Jul-2024 |
| 2 | 30-Aug-2024 | Due Date Extended for tenders closing on 29-07-2024 | Admin Corrigendum Date Extend | 04-Sep-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed. |
| 3 | M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed. |
| 4 | Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed. |
| 5 | M & L for vitrified ceramic light shade tiles 8-10mm thick (square or rectangular) polished area of each tile exc. 0.18 and not exc.0 .36 sqm in floor,skiritng etc. and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadelaid over & including screed bed or bedding layer in mortar CM (1:6) , 15mm thick complete all as specified and directed. |
| 6 | M&L non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm in floors coloured tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including screed bed or bedding layer in mortar CM (1:6) , 15mm thick ,complete all as specified and directed. |
| 7 | M&L glazed ceramic coloured tiles 350 x 250 x 7 mm th/450 x 350 x 7 mm ththick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including screed bed or bedding layer of mortar CM (1:4) 10mm thick complete all as specified and directed. |
| 8 | M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitelaid over and including screed bed or bedding layer in mortar CM (1:6) , 15mm thick complete all as specified and directed. |
| 9 | Taking down cement plaster of any description built in cement mortarcomplete all as specified and directed. |
| 10 | M&L 15mm thick cement plastering in CM 1:6 on brick or concrete / fair surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed |
| 11 | M & L for 15mm thick rendering or brick work or concrete surface in CM 1:4 finished even & smooth w/o using extra cement all as specified and directed. |
| 12 | Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) including making good of distrubed surfaces to portion of wall with new or old brick lintel cill etc including brick work of jambs and cill in CM (1:4) complete all as specified and directed. |
| 13 | -ditto- all as per item No.12 above but exc 1.50sqm but n.exc 4Sqm |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 15 | S&Ffactory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately) |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutter as in Cup Boards of 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately) |
| 17 | S&F for factory made Steel ventilators , fixed type,complete with glazing bars/gauzed portion dovetailed or weldedetc complete all as specified and directed. |
| 18 | S&F for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or weldedetc complete all as specified and directed. |
| 19 | S&F for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or weldedetc complete all as specified and directed. |
| 20 | M & L for framed work such as guard bars made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 etc complete all as specified and directed. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 23 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately) |
| 24 | S&F factory made solid panel PVC wiremesh door shutter 30 mm thick (style) wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading ,wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlyconsisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed |
| 25 | S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads etc. to steel windows/wodden doors/windows complete all as specified and directed. |
| 26 | S & F in Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads etc. to steel windows/wodden doors/windows complete all as specified and directed. |
| 27 | S&F Aluminium anodized barel tower bolt of extruded section 150mm longcomplete all as specified and directed. |
| 28 | S&F aluminium alloy handle casttype anodized of size 100mm long complete all as specified and directed. |
| 29 | S&F stainless steel butt hinges med weight cold rolled 100mm size fixed with stainless steel screws complete all as specified and directed. |
| 30 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 31 | S & F300 mm ordinary rat rail made of MS rod pattern spring including roller and roller plate complete all as specified and directed. |
| 32 | S & F in repair Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and directed. |
| 33 | M & L for preparation of new or previously untreated surfaces of steelof any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 35 | S&F in repair rubber door seal with brush complete all as specified as directed |
| 36 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 37 | S & F in repairs Stainless steel kitchen plate rack 900mm x 600mm and made out of 1 mm thick incl stainless steel sheet including complete all as specified and directed |
| 38 | S&F in repairs chromium plated grating doom 100mm dia with or without waste hole etc complete all as specified and directed. |
| 39 | S&Fin repairs CP brass Health Faucet with flexible pipe 1.00 m tube and hook fixed for EWC suitable for 15mm bore of pipe complete all as specified and directed. |
| 40 | S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.)in position complete all as specified in SSR Part- I. include is dismantling of existing water tank etc complete all as specified and directed. |
| 41 | S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 1000 Ltrs, hoisted and fixed in position with all fittings and fixtures including including 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.)in position complete all as specified in SSR Part-I include is dismantling of existing water tank etc complete all as specified and directed. |
| 42 | S&F vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste CP coupling etc complete all as specified and directed. |
| 43 | S&F in repair low level flushing cistern systern PVC valveless syphonic action type, 10 ltrs capacitycomplete all as specified. |
| 44 | S&F in repairvitreous china wash down water closet pan (padestal pattern) white including fixing bolts and fixtures,P or S trap making good to floor complete all as specified and directed. |
| 45 | S&F in repairvitreous china wash down water closet pan padestal type one piece type complete with soft closing cover white including 5 Ltr cistern fixing bolts and fixtures,P or S trap etc complete all as specified and directed. |
| 46 | S&F in repairsstop valve, bore dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed complete all as specified and directed. |
| 47 | S&F in repairsangle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixedcomplete all as specified and directed. |
| 48 | S&F in repairs concealed stop valve, bore dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed. |
| 49 | S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 50 | S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plated fancy type foam flow for mixing hot and cold water complete all as specified and directed. |
| 51 | S&F in repairs basin mixer 15mm bore brass chromium plated fancy type foam flow for mixing hot and cold water complete all as specified and directed. |
| 52 | S&F in repairs sink mixer with swan neck 15mm bore brass chromium plated fancy typefoam flow for mixing hot and cold water fancy type complete all as specified and directed. |
| 53 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed. |
| 54 | S & F in repairsbrass chromium plated showe rose 125mm size with shower arm complete all as specified an directed by Engineer - in - Charge . |
| 55 | Taking up or down steel tubing and connectipons including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. |
| 56 | Taking up or down steel tubing and connectipons including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 57 | S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore of pipe complete all as specified and directed. |
| 58 | S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore of pipe complete all as specified and directed. |
| 59 | Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repairs corner glass shelf 300 mm x 300 mm x 8 mm toughened glass with brass brackets, Stainless steel railing complete all as specified and directed |
| 61 | S&F in repairs CP brass tubulartowel rail 20mm dia, D type, 60cm long between flanges alongwith bracketscomplete all as specified and directed |
| 62 | S&F in repairs CP brass towel ring complete all as specified and directed |
| 63 | M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1mm thick cement base wall care putty complete all as specified and directed. |
| 64 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over 1mm thick wall care putty complete all as specified and directed. Note :- (i) The work shall be executed through expert team manufacturer or auth applicator of manufacturer.(ii) Scaffolding required for execution of painting work exterior surface shal be deemed to included and quoted rate.(iii) The material required for painting, priming and workmanship shall be restrictly as per manufacture instruction. |
| 65 | Dismantling boarding as in kitchen cupboard,drawers, shutters including chowkhats etc. fixed in any position complete all as specified and directed |
| 66 | M&L prelaminated particle board18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed |
| 67 | S&F for auto closing 15-22mm concealed hinges, 2 holes complete as for kitchen cupboard all as specified and directed. |
| 68 | S&F for soft closing cold rolled steel drawer channel with telescopic ball bearing,latch,etc. complete all as specified and directed. |
| 69 | S&F for brass Drawer pulls/handle, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed. |
| 70 | S&F for 75mm Brass handles, cast type,polished bright complete all as specified and directed. |
| 71 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 72 | M&L for RCC (nominal mix) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like using cement concrete (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) complete all as specified and directed |
| 73 | S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 74 | M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 75 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 76 | Dismantiling framed truss span not exc 10.0m complete all as specified and directed. |
| 77 | Dismantaling of asbestos cement (Corrugated, semi corrugated etc)sheeting in roof covering all as specified and directed. |
| 78 | S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 79 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/Valley gutter/cladding to wall, fixed with selftapping screws complete all as specified and directed. |
| 80 | S & F for Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed. |
| 81 | S&F for framed work for framework and portions framed and hung as gates,including hinges,stops,hand-made sliding bolts etc. conforming to Fe.290.Gde-E-165 all as specified and directed |
| 82 | S&F welded steel wire fabric fixed complete to wood or steel members weight n exc. 4kg/sqm all as specified and directed |
| 83 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 84 | S&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) to be laid in true orizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) cocmprising of main T runners of size 15 x 32mm of length 3000mm, cross - T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24x0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 85 | Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such asswitches, socket, ceiling rose, lamp holder, pendants, bracket and regulator including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 86 | Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed. |
| 87 | M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistrandedcopper conductor cable PVC insulated and unsheathed, drawn in & including concealed10 mm PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steelgalvanised terminal boxes minimum 1mm thickness with top cover ISI marked plastic laminated hylam sheetfor housing/ fixingswitches etc for One light/ holder/fan/exhaust fan point controlled by one switch 5 Amp complete all as specified and directed. Note- (i)The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. |
| 88 | All as per item No.87 here in before but for One 5 pin 5 Amp switch socket combination point on an independent board. |
| 89 | All as per item No.87 here in before but for One 5 pin 5 Amp socket point controlled b one switch on same board. |
| 90 | M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 4 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 2.5 Sq mm (FRLS) multistrandedcopper conductor cable PVC insulated and unsheathed, drawn in & including concealed10 mm PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steelgalvanised terminal boxes minimum 1mm thickness with top cover ISI marked plastic laminated hylam sheetfor housing/ fixingswitches etc for One light/ holder/fan/exhaust fan point controlled by one switch 5 Amp complete all as specified and directed. Note- (i)The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. |
| 91 | S&F modular switch 1 way 6 A, 1 module complete all as specified and directed. |
| 92 | S&F modular socket 6A-2/3 pin combined 2 module complete all as specified and directed |
| 93 | S&F modular switch 1 way 16A, 1 module complete all as specified and directed |
| 94 | S&F modular socket 16A-2/3 pin combined 2 module complete all as specified and directed |
| 95 | S&F ding dong AC 230 volts, single pole complete all as specified and directed. |
| 96 | S&F modular bell push 6A, 1 module complete all as specified and directed. |
| 97 | S&F whilte cover plate with frame, 1 module complete all as specified and directed |
| 98 | S&F whilte cover plate with frame, 3 module complete all as specified and directed |
| 99 | S&F whilte cover plate with frame, 4 module complete all as specified and directed |
| 100 | S&F whilte cover plate with frame, 8 module complete all as specified and directed |
| 101 | S&F modular electronic fan stepped bed regulator 120 W - 2 module complete all as specified and directed. |
| 102 | S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed. |
| 103 | M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cableincluding PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLSinsulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed.( Note :-Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper earth conductor and are run of PVC conduit shall be measured as one unit length.) |
| 104 | Supply and fixingof VTPN DB suitable for mounting MCCB as incomer of rating 100 AMP vertical distribution board 12 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles asrequired complete all as specified and directed. |
| 105 | Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed. |
| 106 | S&F of MCCB 100 Amp, 16 KA, 4 pole including complete electrical connection by appropriate size of copper lugs complete all as specifed and directed. |
| 107 | S&F of MCB SPN 40-63 Amp, 240 volt \"C\" curve 10 KAcomplete all as specified and directed. |
| 108 | S&F of MCB SP 6-32 Amp, 240 volt \"C\" curve 10 KAcomplete all as specified and directed. |
| 109 | S&F of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 110 | S & F building security LED Light 20 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings complete all as specified and directed. |
| 111 | Supply and fixing LED luminaire 600 mm x 600 mm, 35 / 36 watt, 240 V AC recessed type with high efficiency PMMA diffuser soft glare free hight complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and direced. |
| 112 | Supply and laying cbale XLPE insulated screened PVC bedded, galvanized steel strip armoured service pole to building electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed. |
| 113 | M&L sand cushioning for cables complete all as directed.Note :- Punned thickness shall be measured and paid for |
| 114 | M&L for old size brick well burnt, laid flat for cable protection complete all as specified and directed. |
| 115 | Excavation in trenches not excedding 1.5 mtrs wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any type of soil complete all as specified and directed. |
| 116 | M&L for returning filling in including spreading, leveling and well ramming in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed. |
| 117 | M&L for removing surplus excavated material from site not exceeding 50 mtr from stating point and depositing where directed at level not exceeding 1.5 mtr above the starting point compete all as specified and directed. |
| 118 | S&F in repair to metal plug & socket DB with metal plug and MCBs double pole and neutral enclosre with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete all as specified and directed. |
| 119 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but with earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) including dismantling of exsisting earthing complete all as specified and as directed.( Note :-On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.) |
AI Tender Summary
Tender Timeline
Aug 30, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 29, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 04, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 11, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender