|
| 1 | Rates for non-CSR items for various development works in premises of Ramtek Municipal Dist Nagpur. |
| 2 | Supply,Installation,Testing & Commissioning , exterior-rated architectural 70W - 80WRGBW LED floodlight of following wattages. Luminaire should Controlled through DMX/Ethernet protocol using Controller, Controller can achieve 16.7M colors or above. Rated input supply of Input Voltage 120-277 VAC, 50/60Hz ., LED Make : CREE / LUMILEDS / OSRAM & Lumen Maintenance 50,000 hrs L70 at 35°C. Luminaire Housing - Die-cast aluminum , Finish - Electrostatically applied polyester powder coating , Color - Dark Grey (RAL7012) , Bracket - Cold-rolled steel , Adjustability -Tilting angle ±90° , Lenses -Anti-aging and anti-UV high optical efficiency PMMA lenses. Luminaire weight should be upto 8 kgs. The Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet.,IP67 male/female connectors for DMX through wiring (DMX versions only) controlGasket - Silicon , Cover - Clear tempered glass. IP protection rating : IP66, impact resistance IK 06. The luminaire should have multiple beam angle options : 8°, 10°, 15°, 30°, 45°, 60° ( as per site requirement ).CRI>80, SDCM-4. IP67 male female connector The luminaire should provided with Electrical safety class I,Operating Temperature: 10°C to +50°C ,BIS Certified Mandatory. The fixture & their LED driver of same company along with BIS R code of Driver. Fixtures proposed must have passed LM79& LM-80 Reports along with sample from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of materia. Complete installation with foundation arrangment & in proper cagging for safety Approved makes of fittings . Make PHILIPS/ Osram/schreder, or equivalent make with similar specfications along with controller DMX Spitter & Booster & All Cable & other accessories required |
| 3 | Supply Installation Testing & Commissioning of Decorative Pole - 4300mm Scorpio vesta pole made of gravity die cast aluminium (LM6) & circular mild steel pipe (grade YST 210). Decorative base made of gravity die cast aluminium (340mm dia x 517mm Height). Decorative gravity die cast aluminium embellishment pipe (190mm dia x 549mm) height with continuously tappered decorativeflutted pipe bottom section made of gravity die cast aluminium (126mm Bottom Dia & 112 mm Top Dia x 1000mm height) fitted on decorative base. Circular mild steel pipe 88.9mm Dia x 2.9mm thick x 1518mm Height top section. Decorative cast Iron cone (150mm Dia x 62mm Height) coverd on the both section joint area. Bracket stem made of MS square Pipe 120mm, mounted on Gravity Die cast Aluminium embellishment crowned at top with post top luminaire. The artistically curved scorpio four arm made of gravity die cast aluminium, firmly held to the stem and other end facilitates the fitment of luminaire at 445mm on four side from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 200mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at CC 140. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options. With Bracket suitable for 5 luminaries along with 5 Decorative Luminaries of 30W Each |
| 4 | Supply Installation Testing & Commissioning of In-Ground light IP65 Monochromatic 20W Lumibarier for Stairs |
| 5 | SYNTHETIC TURF CHILDRENS PLAY AREA : PROVIDING AND FIXING SYNTHETIC TURF FLOOR byintegrating synthetic turf with traditionalpoured-in-place systems. COMPLETE UNDER THE TECHNICAL GUIDANCE. |
| 6 | PROVIDING AND IMPLEMENTING THE ARTISTIC STONE ART LANTERNS / TERRACOTA LANTERNS ASPER SPECIFIED DESIGNS. |
| 7 | PROVIDING AND FIXING THE STONE ART ARTEFACTS AND MURALS IN GARDEN FOR CREATING SCENES ASPER DEMAND OF THE SITE |
| 8 | PROVIDING AND ERRECTING ANCIENT TYPE GAZEBO. DETAILS :-CNC ZALIS (2/3 MM WITH ANCIENT PAINT AND EFFECTS)STONE ART WORKMS DECORATIVE POLESORNAMENTAL PLASTER |
| 9 | PROVIDING AND ERRECTING ANCIENT TYPE AFRCHES.CNC ZALIS (2/3 MM WITH ANCIENT PAINT AND EFFECTS)STONE ART WORKMS DECORATIVE POLESORNAMENTAL PLASTER |
| 10 | SMALL ANCIENT TYPE ARTEFACTS OF SIZE 8’ TO 10’ FT FOR LANDSCAPINGS USING STONE, CNC METAL ZALI, HEAVY FRM MATERIAL AS PER DESIGNS BYARTIST AND LANDSCAPERS. |
| 11 | ORNAMENTAL TREES AND PLANTS |
| 12 | Armature Materials: supported Armature on existing construction MS frame, Metal rods or wires, These are used to create TheBasic structure.Gate design Material (fiberglass matt 450 GSM double coat with highquality resin & powder, metal) Modeling of sculpture Molding ( FRP & POP ) Casting (FRP) Colouring Material (Automotive paint , Primer coating , Automotive paint (deco paint)) Artist chargeModeling of sculpture , Molding ( FRP & POP ) , Casting (FRP) MS frame Metal rods or wires |
