}

Tender For Hiring Of 10 Ton For Klift, Hazira-Gujarat

Arcelor Mittal Nippon Steel India Limited has published Tender For Hiring Of 10 Ton For Klift. Submission Date for this Tender is 04-07-2024. Cranes Tenders in Hazira Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

43951771
Tender For Hiring Of 10 Ton For Klift
Open Tender
Indian
Gujarat
Hazira
04-07-2024

Tender Details

Tender For Hiring Of 10 Ton For Klift 27020495 10 10 10 HIRING OF FARANA CRANE (15MT) 18 MON 20 DEPLOYMENT OF FORKLIFT (10MT) 18 MON 30 DEPLOYMENT OF TRAILER 40(Feet x Flat bad 18 MON 40 HIRING OF CRANE(80MT) 18 MON Email : taranum.s@ext.amns.in Contact : Name : s Taranum Item Details : The services of operating crew shall be made available for 12 hrs in a day (certification will be done for 10 hours a day- 2 hours for lunch and other breaks) 30 days availability with 26 days operation. In case the service is required beyond normal working Hour, per hour service charges shall be paid. The timing of operation will be 8:00 AM to 8:00 PM or as directive from the AMNS personal. Scope of Work- Vendor: 1. Service provider shall arrange mobilization and De mobilization to <(>&<)> from site without any cost to AM/NS, Billing of the equipment service shall be started after starting the job at site. 2. Service Provide shall deploy adequately trained and experienced operator/personnel for ensuring smooth operation who should be in possession of Valid license. 3. Service Provider shall ensure that In-Out of the vehicle should be supported by valid Gate Pass issued by AM/NS, vehicle insurance, Driver License, and necessary legal documents. 4. All Tools Tackles shall be certified by competent authority and maintain the validity all the time. 5. The Vehicle Number plate, Lighting Systems including side blinkers, Proper locking arrangement shall be maintained without fail, the vehicle should have reverse horn, Number plate should be placed at the front and back side of the vehicle and should be visible. The registration number should be written with paint on both side of the cabin. Contractor name/Owner Name with Contact No should be written with paint on vehicle. 6. Senior Executive of Contractor (Service Provider) shall periodically visit site to observe performance of own personnel and hold review meetings with AM/NS Site In charge for improvement of the same. 7. All Consumables (Fuel, lubricating oil, Engine Oil, grease etc), Maintenance cost <(>&<)>PPEs will be in vendor’s scope. 8. Boarding and lodging of operator and mechanic (if required during maintenance or breakdown) to be arranged by service provider. 9. Service provider must maintain the logbook duly approved by AM/NS Engineer or site in charge on daily basis and same must be produced along with bill. 10. In case of Un availability of equipment /vehicle due to breakdown or operator 1.25 times deductions shall be made in case such Un availability exceeds cumulative 20 Hrs in a calendar month on hour basis. 11. The service provider shall carry out the preventive maintenance beyond normal working hours or as per the schedule pre- agreed with the employer. 12. Service provider must take the permission in writing from AM/NS before taking the equipment outside of AM/NS. 13. AM/NS can terminate the services of the vehicle/equipment within 10 days of the notice to service provider on account on poor performance. 14. Any other Job, which falls in the general purview of contractor’s scope of work shall be carried out by the contractor at the Instruction of Site In charge at no extra cost. 15. In case Contractor’s services are found unsatisfactory or unacceptable or on failure to complete the assignment within the time stipulated by user department AM/NS reserves the right to deduct Page 2 of 2 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000115529 Date 27.06.2024 Submission Date 04.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Debadatta Mohanty Contact Email DEBADATTA.MOHANTY@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details suitable amount as penalty as deemed reasonable from the amount payable and get the work done through third party at the risk <(>&<)> cost of the contractor. 16. In Case of in discipline or any act or behavior by any of contractor staff which is in the opinion of client is in a manner not commiserating with AM/NS Culture, Contractor Shall promptly replace such person on being so informed by AM/NS. 17. All the PPEs for the operator to be arranged by service provider.

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail