Tender For Rfq - Idler - Sinter80 Mh30 Corex 680 - 6Item - 7.6.24 33401945 0001 0001 300158790 IDLER,CONVEYOR BELT,GARLAND,15°,127MM Technical Details Name : Yadav, Sachin - AM/NS India - SMP1 (HAZ) Contact : 9909902779 Email : Sachin.Yadav@amns.in 80 NO IDLER, CONVEYOR BELT TYPE: GARLAND RETURN , DEGREE: 15 DEG , DIAMETER: 127 MM BELT WIDTH: 800 MM Item Details : ALL BELOW REPORTS REQUIRE FOR REVIEW BEFORE DISPATCH. AFTER REVIEW CLEARANCE WILL BE GIVEN OR INSPECTION TO BE DONE AT VENDORS WORKS. DIMENSIONAL REPORT + CHEMICAL ANALYSIS + MECHANICAL PROPERTIES + HARDNESS REPORT (WHERE APPLICABLE) + UT REPORT (WHERE APPLICABLE) + FREE ROTATION REPORT + WATER AND DUST PROOF TEST + FRICTION FACTOR TEST NOTES : (1) WE NEED MATERIAL EXACT AS PER DRG / BOM. (2) NO ANY ALTERNATIVE MATERIAL WILL BE ACCEPTED. (3) MATERIAL CODE AND PO NUMBER MUST MENTION IN ALL TEST REPORT. Item Note : 2 33412820 0001 0002 300904799 IDLER,CONVR,CARRYG,65MM,1350MM,20MM,14MM Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : navneet.shukla@amns.in 30 NO IDLER,CONVEYOR BELT DESIGN TYPE:CARRYING , IDLER SHELL DIA:65 MM , FACE WIDTH:1350 MM SHAFT DIA:20 MM , SHAFT LENGTH:1380 MM , SHAFT END TYPE:SLOT NOTCH,SLOT SIZE:14 MM , SHELL THICKNESS:4.5 MM SHELL MATERIAL:MS-ERW , SHAFT MATERIAL:EN-8 , BELT WIDTH:1200 MM BEARING DETAILS:420204 ADDITIONAL INFORMATION:FLAT CARRYING ROLLER FOR IOBS DOSSING CONVEYOR DRAWING DRG NO:HBI-MH-IOBS-DOSSING-CR-001 , DRAWING REV NO:00 Item Details : 1. PO Material reqd. as per Item Text only. Any variation unless requested or approved by AMNS shall lead to rejection of material. 2. Material to be packed in Boxes, Crates, stand etc for ease of unloading and handling at site. Loose material will not be accepted. 3. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO delivery date 4. In case of any query, vendor must discuss with the user or visit the site before submitting their Techno Commercial offer 5. As applicable - GA DWG, QAP, Technical Data Sheet etc to be submitted with their offer/quotation for technical review 6. Post PO - QAP and DWG approval required for manufacturing clearance to vendor (AMNS Discretion) 7. Post PO - Inspection and Test Reports (Physical, Chemical, UT etc.) required for dispatch clearance to vendor (AMNS Discretion) Item Note : 3 33417606 0001 0003 300913572 IDLER,CONVR,CARRYG,159.1MM,465MM,30MM Technical Details Name : Amar Dhok Contact : Email : AMAR.DHOK@AMNS.IN 180 NO IDLER,CONVEYOR BELT DESIGN TYPE:CARRYING , IDLER SHELL DIA:159.1 MM FACE WIDTH:465 MM , SHAFT DIA:30 MM , SHAFT LENGTH:497 MM SHAFT END TYPE:SLOT , NOTCH,SLOT SIZE:22 MM SHELL THICKNESS:4.85 MM , SHELL MATERIAL:YST 210 SHAFT MATERIAL:C40 , BELT WIDTH:1200 MM , BEARING DETAILS:420205 ADDITIONAL INFORMATION:IDLER TUBE SHALL BE MADE OUT OF ERW STEEL TUBE AS PER IS 9295. Item Details : • DRG And QAP To be approved before starting the manufacturing. • Inspection reports to be submit for the DCC. • Material to be dispatched after approved DCC by AMNS only. Item Note : 4 33417606 0002 0004 300325750 IDLER,IMPACT,88.9MM,139.7X380MM,1000MM Technical Details Name : Amar Dhok Contact : Email : AMAR.DHOK@AMNS.IN 250 NO IDLER TYPE: IMPACT , IDLER SHELL DIA : 88.9 MM , FACE WIDTH : 380 MM SHAFT DIA : 25 MM , SHAFT LENGTH : 412 MM SHAFT END TYPE : B CLASS , NOTCH,SLOT SIZE : 18 MM SHELL THICKNESS : 4.85 MM , SHELL MATERIAL :IS9295 ERW BELT WIDTH : 1000 MM , RUBBER LINING OUTER DIAMETER : 139.7 MM BEARING DETAILS : ANTI SIEZE 420205 BEARING HOUSING : CRCA PRESSED STEEL , TROUGHING ANGLE : 35 DEG, DESIGN : AS PER IS8598 IS9295, ADDITIONAL INFORMATION : WITH THROUGHOUT OD NATURAL RUBBER RINGS,HARDNESS :50-60 SHORE A SHAFT MATERIAL : CARBON STEEL,EN 8 BRIGHT BAR Item Details : • DRG And QAP To be approved before starting the manufacturing. • Inspection reports to be submit for the DCC. • Material to be dispatched after approved DCC by AMNS only. Item Note : Page 2 of 2 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000115558 Date 27.06.2024 Submission Date 07.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Anand Talabhatula Contact Email anand.talabhatula@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 5 33417606 0003 0005 300913555 IDLER,CONVR,V-RETRN,139.8MM,600MM,25MM Technical Details Name : Amar Dhok Contact : Email : AMAR.DHOK@AMNS.IN 150 NO IDLER,CONVEYOR BELT DESIGN TYPE:V-RETURN , IDLER SHELL DIA:139.8 MM FACE WIDTH:600 MM , SHAFT DIA:25 MM , SHAFT LENGTH:660 MM SHAFT END TYPE:SLOT , NOTCH,SLOT SIZE:20 MM SHELL THICKNESS:4.85 MM , SHELL MATERIAL:YST 210 SHAFT MATERIAL:C40 , BELT WIDTH:1000 MM , BEARING DETAILS:420205 ADDITIONAL INFORMATION:IDLER TUBE SHALL BE MADE OUT OF ERW STEEL TUBE AS PER IS 9295. Item Details : • DRG And QAP To be approved before starting the manufacturing. • Inspection reports to be submit for the DCC. • Material to be dispatched after approved DCC by AMNS only. Item Note : 6 33417606 0004 0006 300325751 ROLL,IDLER,139.8MM,MS,IS 9295 Technical Details Name : Amar Dhok Contact : Email : AMAR.DHOK@AMNS.IN 100 NO ROLL,IDLER TYPE : GARLAND RETURN ROLLER , DIAMETER : 139.8 MM LENGTH : 600 MM , MATERIAL : MILD STEEL,IS 9295 ADDITIONAL INFORMATION : SHAFT DIA:25 MM,L:660 MM,MATERIAL:CARBON STEEL C40 Item Details : • DRG And QAP To be approved before starting the manufacturing. • Inspection reports to be submit for the DCC. • Material to be dispatched after approved DCC by AMNS only. Item Note :
