Tender For Periodical Services To Certain Building And Day To Day Maintenance Works At Nkp, 8 Lu, 11 Asc, 3 Afsr, Site C And Mes Complex Area Under Ge (Af) Borjhar.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
18 Jul 2024
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
borjhar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services To Certain Building And Day To Day Maintenance Works At Nkp, 8 Lu, 11 Asc, 3 Afsr, Site C And Mes Complex Area Under Ge (Af) Borjhar.
BOQ
| Sl. No. | Item Description |
| 1 | M&Lfor Taking down cement plaster in any descriptionon brick or stone wall etc incl racking outjoints.hacking for key scrubbing down with water etc. complete all as specified andas directed by Engr-in-Charge. |
| 2 | M&Lforapplying one coat of white wash to old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified andas directed by Engr-in-Charge |
| 3 | M&Lforapplying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 4 | M&Lforapplying one coat of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 5 | M&Lforapplying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 6 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 2 to 3 mm thick water proof wall care putty complete all as specified andas directed by Engr-in-Charge |
| 7 | M&Lforapplying one coat of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 8 | M&Lforapplying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 9 | M&Lforapplying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 10 | M&Lforapplying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified andas directed by Engr-in-Charge |
| 11 | M&Lforapplying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified andas directed by Engr-in-Charge |
| 12 | Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of exterior emulsion paint weather coat, complete all as specified and as directed. |
| 13 | M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement complete all as specified andas directed by Engr-in-Charge |
| 14 | M&L for 5 mm thick rendering in cement mortar (1:3)to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified andas directed by Engr-in-Charge |
| 15 | M&L rendering 15 mm thick cement plaster on fair face of brick work or concrete surface in CM (1:4) with water proofing compound mixed @ 3% by weight of cement complete all as specified and as directed.(Note -W.P.C. shall be measured and paid separetly . ) |
| 16 | Supply only integral water proofing compound all as specified and as directed. |
| 17 | M&LFor Up rooting of tree from walls of bldgs up to extranded root and spraying of acid of required quantity complete from any location of bldg up to threestories and above and making good disturbed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate etc complete all as specified andas directed by Engr-in-Charge |
| 18 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surface complete all as specified andas directed by Engr-in-Charge |
| 19 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over 1 to 2 mm thick wall putty complete all as specified and directed by Engineer -in-Charge. |
| 20 | M&L for applying two coat of cement based paint to newly plastered surface of wall over a coat of primer including preparation complete all as specified andas directed by Engr-in-Charge |
| 21 | M & L for writing letter/number up to 05 letters or figure (Block, Roman, Italic or Indian ,stop, commas, shortline, dashes, hyphens, brackets etc) in Synthetic enamel paint n.exc. 30 cm high on base paint of black colour of area exc 0.0625sqm but not exc 0.122 sqm at any heiht of building (up to G+2) complete all as specified andas directed by Engr-in-Charge |
| 22 | Dismantling AC/ CGI sheets (corrugated/ semi corrugated/ CGI etc) as in roof coverings including ridges complete all as specified andas directed by Engr-in-Charge |
| 23 | Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified andas directed by Engr-in-Charge |
| 24 | S & F pre-painted color galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified andas directed by Engr-in-ChargeNote:Galvalume sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. |
| 25 | S & Fpre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etcfixed with self tapping screws complete all as specified andas directed by Engr-in-Charge |
| 26 | Dismantiling of wall and ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified andas directed by Engr-in-Charge |
| 27 | M&L for non asbetos fiber cement building board fixed or laid in ceiling/inserted to timber/GI/aluminium frame work with screw complete as in repair, all as specified and as directed by Engineer-in-Charge |
| 28 | S&F anodised aluminium snap grid frame work for false ceiling of siz e605x605 mm including all necessary hanging arrangement complete all as specified and as directed by Engineer-in-Charge |
AI Tender Summary
Tender Timeline
Jun 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender