Tender For State Plan Scheme 2023-24-Scheme For Logistics And Infrastructure To Phq-Repair And Maintenance Work At Manhole Of Ips Quarters No.2 Thannerkudam Dilkush Compound, Thiruvananthapuram (Dsr 2018)(Re)
Tender Value
2.49 Lakhs
Estimated cost
Bid Submission
04 Jul 2024
0 days left
EMD
6250
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vazhuthacaud → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
State Plan Scheme 2023-24-Scheme For Logistics And Infrastructure To Phq-Repair And Maintenance Work At Manhole Of Ips Quarters No.2 Thannerkudam Dilkush Compound, Thiruvananthapuram (Dsr 2018)(Re) => Limited
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | 50.18.9.9.1Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of Joints complete as per directionof engineer in charge.110 mm dia 6Kgf/cm2 |
| 3 | 50.18.9.19.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00m spacing . This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge 110 mm dia 6Kgf/cm2 - External work- Exposed on wall |
| 4 | 50.18.9.7.1Providing and fixing PVC pipes includings of pipes with one step PVC solventcement, trenching refilling & testing of joints complete as per direction ofEngineer in Charge. 63 mm dia 6Kgf/cm2 |
| 5 | 50.18.7.6.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 10 Kfg/cm - Internal work- Exposed on wall |
| 6 | 50.18.9.4.1Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge.32 mm dia 10.Kgf/cm2 |
| 7 | 50.18.9.13.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 25 mmdia 12 Kgf/ cm2- External work- exposed on wall |
| 8 | 50.18.9.14.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 32 mmdia 10 Kgf/cm2 - External work- Exposed on wall |
| 9 | 50.18.9.15.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 40 mmdia 10Kgf/cm2- External work- Exposed on wall |
| 10 | 50.18.9.22.1Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Elbow |
| 11 | 50.18.9.22.2Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow |
| 12 | 50.18.9.22.3Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110 mm dia Door Elbow |
| 13 | 50.18.9.22.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement- 110 mm dia Bend |
| 14 | 50.18.9.22.5Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipesincluding jointing with PVC solvent cement 110x110x110 mm dia Tee |
| 15 | 50.18.9.22.6Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110x110x110 mm dia Door tee |
| 16 | 50.18.9.22.8Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,including jointing with PVC solvent cement -110 mm dia Vent cowl |
| 17 | OD30300/2023-2024Constructing and providing RCC manhole 60X60X60cm inner dimension includingearth work with 30 cm work clearance PCC 1:4:8 using 40 mm metal 10 cm thick forbase RCC 1:2:4 using 20 mm metal for 20cm thick for sides and 10 cm thick basewith 11 cm thick pre cast cover provision for inlet and out let connection formingchannels in cc 1:3:6 at bottom ,plastering with flush coat inside cutting groove forcover slab ,handling grip using 12 mm bar etc complete |
| 18 | OD30301/2023-2024Providing and fixing Vitrified glazed wall tiles conforming to IS : 15622 (thicknessto be specified by the manufacturer), of approved make, in all colours, shades exceptburgundy, bottle green, black of any size as approved by Engineer -in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete |
| 19 | OD30302/2023-2024Providing and laying matt finished non slippery bathroom vitrified floor tiles indifferent sizes (thickness to be specified by the manufacturer) with water absorptionless than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), includinggrouting the joints with white cement and matching pigments etc., complete.Size ofTile 600 x 600 mm.(RAK,Kajaria,Johnson,Asian, or Equvalent) |
| 20 | OD30303/2023-2024Supply and fixing 110 mm SS Gratings. |
| 21 | OD30304/2023-2024Providing and fixing 110mm PVC Multi floor trap |
| 22 | OD30305/2023-2024Constructing silt pit 20 x 20cm up to 60 cm depth inside dimension in half brick thickwalls in CM all-round over brick jelly concrete in CM 1:3 for foundation 15 cm thick,plastering with CM 1:3, 12 mm thick with neat cement flushing coat, etc. completeincluding providing 2 nos. heavy CI gratings, 150 x 150 mm and 180 x 180 mm forthe inside and outside , painted with black Japan two coats and necessary earth workexcavation etc. complete.N |
| 23 | 18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank. |
| 24 | 18.18.3Providing and fixing ball valve (brass) of approved quality, High or low pressure,with plastic floats complete:25 mm nominal bore |
| 25 | 15.2.2Demolishing cement concrete manually / by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer - in-Charge.Nominalconcrete 1:4:8 leaner mix ( including equivalent design mix) |
| 26 | 15.23.1Dismantling tile work in floors and roofs laid in cement mortar including stackingmaterial within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 27 | 4.1.5Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 28 | 17.2.1Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever), conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the wallsand floors wherever required:W.C. pan with ISI marked white solid plastic seat andlid |
| 29 | 17.7.3Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Washbasin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 30 | 50.17.1.3Supplying and fixing CP Towel rod 60cm or nearest available length including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-incharge. |
| 31 | 50.17.1.5Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make )including cost of materials and labour charges etc complete as per the direction of siteEngineer-in-charge. |
| 32 | OD30359/2023-2024Providing and fixing C.P. brass pillar tap (Jaguar or equivalent )of approved qualityconforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 33 | OD30360/2023-2024Engaging Man Labour - Painter |
| 34 | OD30388/2023-2024Engaging man labour -Fitter |
| 35 | OD30361/2023-2024Providing and fixing 150x150mm over head shower square with shower arm ,concealed stop cock ( CERA or equivalent) including all labour charges etc complete |
| 36 | OD30362/2023-2024Engaging Man labour -Coolie |
| 37 | 15.7.4Demolishing brick work manually / by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres lead asper direction of Engineer-in-Charge.In cement mortar |
| 38 | 4.1.6Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 39 | 4.1.8Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 nominal size) |
| 40 | 50.6.1.9Solid block masonry using pre cast solid blocks( Factory made) of size 40x20x15 cmor nearest available size confirming to IS 2185 part I of 1979 for super structureabove floor two level upto floor five level with thickness 15cm in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete |
| 41 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 42 | 13.83.2Wall painting with premium acrylic emulsion paint of interior grade, having VOC(Volatile including applying additional coats wherever required to achieve even shadeand colour.Two coats |
| 43 | 14.54.1Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to an give even shade:One or more coats on old work |
AI Tender Summary
Tender Timeline
Jun 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 06, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender