Tender For Installation Of Highmast Light Near Nurganj Dakshin Para Samsul House In Kaligram Gp Under Chanchal1 Panchayat Samiti 98456986
Tender Value
1.60 Lakhs
Estimated cost
Bid Submission
03 Jul 2024
0 days left
EMD
3200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chanchal → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Highmast Light Near Nurganj Dakshin Para Samsul House In Kaligram Gp Under Chanchal1 Panchayat Samiti 98456986
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work)a) With earth obtained from excavation of foundation. |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips....... floor as per relevant IS codes.(c) RajMahal |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stonechips (20 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IS codes.(i) Rajmahal Variety. |
| 6 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction.Other than SAIL, IRNL, TATA |
| 7 | Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.(including thermocol,if necessary) |
| 8 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below |
| 9 | Supply & Erectionof swagged type street pole Designation= 410spl9, Overall length=9mtr.planting depth=1.50mtr. Bottomlength=5.00mtr., Middle length =2 mtr, Topength=2mtr., outside dia & thickness of section (MVi) Bottom (139,7x4.5, tV- 114.3x3.65, Top \" 88.9x3.25(market price@ Rs. 100.00/Kg |
| 10 | Painting of H-pole (DP) structure with upto 9 mts. long steeltubuler poles complete with MS channels, cross arms & cross bracings etc. with 2 coats of aluminium paint after one coat of RO primer of approved make & brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coatof paint |
| 11 | Distribution wiring for street light on pole with 2x1/1.40 PVC insulated and sheathed (single core) in 15 mm dia GI pipe (ISI Medium), without control switch incl. S&F 30.48 cm outdoor typedispersive light fitting with GI Pipe bracket and providing 25x6mm Galv. MS flat clamps with bolts, nuts etc. and incl. painting(Av. run 3m)(P-H5,I-1) |
| 12 | Fixing outdoor type fluorescent/SV/MV light fitting on poleincluding S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium)bracket with 40 mmx10 mm thick, MS clamp etc. and providingwiring with 2x1/1.40 PVC insulated & sheathed wire (single core)partly in GI conduit & partly through above bracket from OH lineto the fitting, without control switch, incl. making connections andpainting(P-H5,I-3) |
| 13 | Connecting the equipments to earth busbar including S & F GI(Hot Dip) wire of size as below on wall/floor with staples buriedinside wall/floor as required and makingconnection toequipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages(b) Stranded GI wire(i) 7/14 SWG |
| 14 | Supply, lnstallation, testing & commissioning of 240V 155W floodlightluminaire protection lP-66 & lK05 , system efficiency not less than *130Lumen/Watt |
| 15 | Distribution wiring in 2x1.5 sqmm single core PVCinsulated stranded Copper wire in 19 mm in blackstove EI conduit/GI conduit to 3 pin Plug Pointsincl. S&F 5 A Piano Key type switch with earthingattachment in 16 SWG GI Wire and paintingGI Conduit |
| 16 | Display board permanent nature by marbel plate as per direction of EIC.(L/S) (Non-Schedule Item) |
| 17 | Add GST @ 18% |
| 18 | Labour welfare cess@1% |
AI Tender Summary
Tender Timeline
Jun 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 06, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender