Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-07-2024 | Corrigendum-1_Due date extension | Date | 29-07-2024 |
| Sl. No. | Item Description |
| 1 | Infrastructure Development in Tummalapalle Township (Includes both Civil and Electrical Works) |
| 2 | CIVIL RELATED WORKS |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 6 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 7 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion). Along external wall where the apron is not provided using chemical emulsion at 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mAll kinds of soil. |
| 9 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 mHard Rock |
| 10 | Surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 12 | Filling by brought out excavated earth in layers not exceeding 20cm . In depth, consolidating each deposited layer by ramming (allow for breaaking up lumps, shrinkage etc.) including lead excavation of soil at source, transportation, spreading, royalty, levelling, cost of all tools, tackles and labour complete as directed by the Engineer-in-charge. |
| 13 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 14 | Disposing of excavated rocks upto a lead of 5 k.m. including excavation at source, transportation, spreading, dumping, cost of all tools, tackles and labour complete as directed by the Engineer-in-charge. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 16 | Supply, mix, place in position, compact and cure cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) below foundations, walls, wells, pits, trenches, etc. and in basin lining as per specifications, drawings and directions of the Engineer and including cost of centring and shuttering and cement. |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size) |
| 18 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 21 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 23 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) all complete as per direction of EIC. Including cost of cement. |
| 24 | Half brick masonry with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 25 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for :Shelves (Cast in situ) |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for :Stairs, (excluding landings) except spiral-staircases |
| 32 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 33 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 34 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)Rates for external plastic are for height upto 10m fromground level in less otherwise stated |
| 35 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)Rates for external plastic are for height upto 10m fromground level in less otherwise stated |
| 36 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)Rates for external plastic are for height upto 10m fromground level in less otherwise stated |
| 37 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)Rates for external plastic are for height upto 10m fromground level in less otherwise stated |
| 38 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
| 39 | Neat cement punning. |
| 40 | White washing with lime to give an even shade :New work (three or more coats) mix with fevicol DDL and Robin Blue or as per direction of EIC |
| 41 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied at 3.84 kg/10 sqm) |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 44 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls at 1.25 ltr/10 sqm over and including one coat of Special primer applied at 0.75 ltr /10 sqm |
| 45 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm) |
| 46 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete On concrete work |
| 47 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes |
| 48 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 49 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 50 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
| 51 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
| 52 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 53 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 54 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 55 | Providing and fixing ball bearing for rolling shutters. |
| 56 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 57 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer-in-charge including cost of all materials. |
| 58 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 59 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge. |
| 60 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places |
| 61 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces |
| 62 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 63 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight notless than 10 kg/ sqm) |
| 64 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)Subtract : Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)Add : 3 mm thick translucent white acrylic plastic sheet |
| 65 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. Including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. |
| 66 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.50x50 mm (base and height) |
| 67 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 68 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 69 | Providing and fixing bright finished brass quadrant stay 300 mm long with necessary brass screws etc. complete. |
| 70 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type |
| 71 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.40 mm |
| 72 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. |
| 73 | Providing and fixing nickel plated M.S. pipe rods with nickel plated brackets for inner side of cup board20 mm dia (heavy type) |
| 74 | Providing and fixing 25 mm thick shutters for cup board etc. : Glazed shutters :Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 75 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make ( Somany/Kajaria/Nitco) in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 76 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 77 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 78 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in harge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 79 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Ordinary rockPipes, cables etc. not exceeding 80 mm dia |
| 80 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Ordinary rockPipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 81 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 82 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Preferable Make (Hindware/Parrywair/ Hindustan/ Cera) or direction of EIC |
| 83 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.Preferable Make (Hindware /Parrywair/ Hindustan /Cera ) or direction of EIC |
| 84 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern |
| 85 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm witha single 15 mm C.P. brass pillar tap |
| 86 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm or as per direction of EIC |
| 87 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460 mm bowl depth 200 mmor as per direction of EIC |
| 88 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixerADD : Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings:Subtract: C.P . Brass Centre Hole Basin Mixer With Cast S poutPreferable Make (Hindware/Parrywair/Hindustan/Cera) |
| 89 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixerPreferable Make (Hindware/Parrywair/Hindustan/Cera) |
| 90 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixerSubtract: C.P . Brass Centre Hole Basin Mixer With Cast S poutPreferable Make (Hindware/Parrywair/Hindustan/Cera) |
| 91 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia |
| 92 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P . brass screws and washers complete. |
| 93 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 94 | Providing and fixing Stainless Steel 24 inch Towel Rod , Round Chrome finish made in India as per direction of EIC |
| 95 | Providing and fixing braided Stainless steel connection pipe Hose pipe for wash basin, kitchen sink , geyser- 18 inch (2 pieces set, pack of 1 pair) |
| 96 | Providing and fixing of Hand showerdia 100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning SystemJaguar or as per direction of EIC |
| 97 | Providing and fixing of Easy flex Tube In Chrome Finish 1.5M Long with NutsJaguar or as per direction of EIC |
| 98 | Providing and fixing of Premium Wall Bracket For Hand Shower, dia 35mm and 100mm Long Round ShapeJaguar or as per direction of EIC |
| 99 | Providing and fixing of Overhead Shower ø100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning SystemJaguar or as per direction of EIC |
| 100 | Providing and fixing of Shower Arm Casted Chrome 160mm Long Light Body Round Shape for Wall Mounted Showers with FlangeJaguar or as per direction of EIC |
| 101 | Providing and fixing of Shower Arm Chrome requierd sizeLong Light Body Round Shape for Wall Mounted Showers with Flange Jaguar or as per direction of EIC |
| 102 | Providing and fixing of Towel Ring Round with Round FlangeJaguar or as per direction of EIC |
| 103 | Providing and fixing with all fittings at Basin of Central Hole Basin Mixer with Regular Spout without Popup Waste System with 450mm Long Braided Hoses, 20mm Cartridge SizeJaguar or as per direction of EIC |
| 104 | Providing and fixing with all fittings Bib Cock (Angular Shape) With Wall FlangeJaguar or as per direction of EIC |
| 105 | Providing and fixing with all fittings Bib Cock (Straight Line Model) With Wall FlangeJaguar or as per direction of EIC |
| 106 | Providing and fixing with all fittings bibcock with wall flanges Jaguar or as per direction of EIC |
| 107 | Providing and fixing with all fittings Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs and Wall Flange (without Hand and Overhead Shower) Jaguar or as per direction of EIC |
| 108 | Providing and fixing with all fittings at wall mixer with 115mm long bend pipe for connection to overhead shower (with brass and stone diverted filter ) with aerator. Jaguar or as per direction of EIC |
| 109 | Providing and fixingExposed Part Kit of Concealed Stop Cock and Flush Cock with Fitting Sleeve, Operating Lever and Adjustable Wall Flange with Seal Jaguar or as per direction of EIC |
| 110 | Providing and fixing with all fittings Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) with Exposed Shut Off Provision and 100mm Square PlatePreferable Make Jaguar or as per direction of EIC |
| 111 | Providing and fixing with all fittings of pillar CockPreferable Make Jaguar or as per direction of EIC |
| 112 | Providing and fixing with all fittings of Sink Cock with Extended Swinging Spout (Table Mounted Model)Preferable Make Jaguar or as per direction of EIC |
| 113 | Providing and fixing with all fittings of 2 Way Bib Cock With Wall FlangePreferable Make Jaguar or as per direction of EIC |
| 114 | Providing and fixing with all fittings of Hand shower (Health Faucet with 8mm dia 1.2 Metre long flexible tube and wall hook for Toilet.Preferable Make Jaguar or as per direction of EIC |
| 115 | Providing and fixingbanded Eye piece for Door view gold finish 180 degree (Door Hardware fittings) as per direction of EIC |
| 116 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore Preferable Make Essco/Hindware |
| 117 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter |
| 118 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore |
| 119 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 120 | Providing and fixing toilet paper holder : CP brass |
| 121 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. |
| 122 | Providing and fixing ISI marked oxidised M. S handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 123 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. |
| 124 | Providing and fixing brightfinished brass handles with screws etc. complete: 100 mm |
| 125 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :: 200x10 mm |
| 126 | Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :300x20x6 mm |
| 127 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. CompleteTwin rubber stopper |
| 128 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm |
| 129 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm |
| 130 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10 mm |
| 131 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
| 132 | Providing and fixing bright finished brass door latch with necessary screws etc. complete :250x16x5 mm |
| 133 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. |
| 134 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 135 | Supplying, fitting and fixing of the brass parliamentary hinges with necessary screws etc. complete. |
| 136 | \"Providing and fixing G.I. pipescomplete with G.I. fittings including trenching and refilling etc. for External worka) 15 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 137 | \"Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External workb) 20 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 138 | \"Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External workc) 25 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 139 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work\"d) 50 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 140 | \"Providing and fixing G.I. pipescomplete with G.I. fittings and clamps i/c cutting and making good the walls etc.for Internal work - Exposed on walla) 15 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 141 | \"Providing and fixing G.I. pipescomplete with G.I. fittings and clamps i/c cutting and making good the walls etc.for Internal work - Exposed on wallb) 20 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 142 | \"Providing and fixing G.I. pipescomplete with G.I. fittings and clamps i/c cutting and making good the walls etc.for Internal work - Exposed on wallc) 25 mm dia nominal borePreferable Make: TATA/Jindal or as per direction of EIC |
| 143 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592TypeA, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 144 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore |
| 145 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore |
| 146 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 147 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 148 | Providing and fixing 100 mm sand cast Iron grating for gully trap |
| 149 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth |
| 150 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 |
| 151 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 152 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 |
| 153 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 154 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 155 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zoneIII) : 3 graded stone aggregate 20 mm nominal size |
| 156 | Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement |
| 157 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 158 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm |
| 159 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 160 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 161 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 162 | Providing and laying Non-pressure NP-2 class R.C.C pipe with collars joined with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement 2 fine sand) including testing of joints etc. complete. A) 600 mm dia |
| 163 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density including a tack coat over WBM and existing bituminous surfaces and also preparation of existing bituminous road surfaces to get bonding of old and new bituminous road as per specification, complete and as per directions of Engineer-in-Charge. 40 mm compacted thickness with bitumen of grade VG-30 at5.5% (percentage by weight of total mix) and lime filler at 3% (percentage by weight of Aggregate) prepared in Hot Mix Plant. |
| 164 | Sub-base course supplying, laying, spreading and consolidating, 125 mm thick (consolidated) in single layer, using 60-90 mm approved quality stone aggregates, binding with approved quality stone dust, rolling in stages with power roller of 8 to 10 tonnes capacity to proper line, grade and camber etc., including repairing of pot holes necessary cleaning excavation required for relaying of sub base course with all necessary bye works as per specification, drawing and direction of the Engineer-in-Charge (Payment will be made for actual finished thickness.) |
| 165 | Base course supplying and laying water bound macadam of 150 mm consolidated thickness (in two layer) using 50 mm and down approved quality stone aggregates, stone screening, sorting, spreading, laid to proper camber and gradient with templates, binding with approved quality stone dust (cost inclusive), dry and wet rolling by 8 to 10 tonnes capacity road roller including repairing of pot holes necessary cleaning excavation required for re-laying of base course as per specifications, drawing and instruction of the Engineer-in-Charge. (Payment will be made for actual consolidated thickness.) |
| 166 | Supplying, Stacking, Spreading, and consolidating good granular moorum as per specification free from gravel etc. including loading unloading and stacking at site watering rolling with power road roller all complete, (Payment will be made after deduction of 11.52% void from stack measurement) |
| 167 | Providing and fixing 20mm(min.) thick polished, machine cut cuddapah slab with round edges in steps and floors of required size and approved quality laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels as per directions of Engineer-in-charge |
| 168 | Providing and fixing float valve approved quality including all fittings complete and as per directions of E.I.C. |
| 169 | Providing and fixingStop Cock at required place. Jaguar or as per direction of EIC |
| 170 | Providing and fixing of bended door safety chain lock for safe and secure homeor as per Direction of EIC |
| 171 | Providing and fixing pressure relief valve approved quality including all fittings complete and as per directions of E.I.C. |
| 172 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 173 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads and lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 174 | Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, TandP, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 175 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance withASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 176 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 177 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 178 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m : All kinds of soil . |
| 179 | Rain Water Harvesting : Making pit for rain water harsvesting 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 180 | Rain Water Harvesting : Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil300 mm dia |
| 181 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia |
| 182 | Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge. |
| 183 | Supplying, filling, spreading and leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge. |
| 184 | Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of Engineer -in charge. |
| 185 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 186 | ELECTRICAL RELATED WORKS |
| 187 | Supply and fixing ofSingle 20W LED Tube Light Fitting ( T/L ) on wall including all accessories of Bajaj / Philips/reputd make as per EIC. |
| 188 | Supply and fixing ofSingle 24W LED Tube Light Fitting ( T/L ) on wall including all accessories of Bajaj / Philips/reputd make as per EIC. |
| 189 | Supply and fixing of 14 WattsLED Lamp in B22 base of Bajaj/ Crompton Greaves / Philips/Halonix /reputed make as per EIC. |
| 190 | Supply and fixing of Industrial TypeBulk HeadFitting suitable for 10W LED lamp(B22 base) of Bajaj/Crompton Greaves/Phillips/Bajaj/Halonix / reputed make as per EIC,with cast aluminium LM6 Body, heat resistant glass cover and MS Galvanised Wireguard with 10W LED lamp(B22 base), Bajaj/Crompton Greaves/Phillips/Bajaj/Halonix./ reputed make as per EIC |
| 191 | Supply and installation of 90W LED on Tubular Pole / on wall/ street light pole, 90 Watts LED with single piece die cast Aluminium housing and UV Stabilized Acrylic cover, 220 / 240V AC , IP66, operating voltage: 90-300v AC. luminaire system efficacy: greaterthan or equal to 100Lm/Watt, colour temperature: 6000 K, beam angle: greaterthan or equal to 120, CRI greaterthan or equal to 70. This also includes suplly of GI Pipe of suitable diameter and all hard wares for installation. |
| 192 | Supply and fixing of Decorative light (220-240 V) in reputed brand or direction of EIC. ( 1 x B22 bulb Metal, synthetics White 220-240 V) |
| 193 | Supply and fixing of Outdoor stair light make Havells ELLIPSE NEO 13.5 W HEXA Cool Daylight (CDL) or reputed brand as per direction of EIC |
| 194 | Supply and fixing of LED tube light , Length - 31cm, wattage bulb included 4 W of reputed brand as per direction of EIC |
| 195 | Supply and erection of Landscape lightting for park area /path way with 11w including all hardwares and accessories, as per the instrucions Enginner incharge. |
| 196 | Supply and Fixing of 1200mm Sweep ceiling fans with BLDC motor of 5 star rating with double ball bearingcomplete with down rod,clamp,canopy etc.including supply of electronic regulator as per IS 374:2019 latest . All the supplied fans should be of same colour. Make shall be approved by EIC |
| 197 | Supply and installation of up to 300mm Sweep, 1440 RpmClean FlowSingle phaseexhaust fan with accessories including. Fixing hard wares to be supplied by the bidder.Make : Crompton Greaves/ reputed make as per EIC |
| 198 | Supply and fixing of exhaust fans (Sweep size 200 mm white) or reputed brand as per direction of EIC |
| 199 | Providing and fixing faber make kitchen Chimney of width : 60Cm, Suction : 1200m3/hr, Function Type : Autoclean, Filter Type : Filter less, Finish : BlackControl : Touch and Gesture, Led : 2x2W LED complete |
| 200 | 25Lts storage water heater( Geyser)MODEL :Caldia, Bajaj make, operating on 230V AC. This includes supply and connection of 15 A, 3 Pin Plug ( Anchor make ) and all necessary hard wares.. |
| 201 | Supply, installation and commissioning of 1.5Ton Air conditioners with all the accessories required for completion of job ( i.e, outdoor stand, copper tubes, stabilizers, 1 No gang box with DP MCB of suitable rating of minimum 20 Amps and etc). Accessories which are not specifically mentioned by required for completion of job are in the scope of the contractor. BEE star rating 5 Air conditioners shall be used which are safe for the environment ( Green A/c\"s) |
| 202 | Supply, installation and commissioning of 2Ton Air conditioners with all the accessories required for completion of job ( i.e, outdoor stand, copper tubes, stabilizers, 1 No gang box with DP MCB of suitable rating of minimum 20 Amps and etc). Accessories which are not specifically mentioned by required for completion of job are in the scope of the contractor. BEE star rating 5 Air conditioners shall be used which are safe for the environment ( Green A/c\"s) |
| 203 | Supply and fixing of Anchor make Call Bell including supply of hard wares. |
| 204 | Supply & fixing of 5 Pin 15 / 5 Amps universal Socket ,250Volt and15 Amps switch with internal wiring between switch and socket with 4Sqmm single core pvc insulated wire for Phase.This also includes supply and fixing of concealed type MS box and pvc pipes in wall. Switch board, switches and sockets are completely ROMA model. Make : Anchor/Vimal/As per instructions of engineer incharge. |
| 205 | Supply and fixing of 5A , 5Pin Socket with 5A SP Switch with internal wiring ( using max 0.1mt wire ,2.5 Sqmm-Phase , Neutral and Earth each ) on the Switch Boards and as per the instructions of Engineer in charge.No of switch boards will be distributed as per the requirement of individual rooms. The contractor has to quote considering switchboard along with switches and sockets. The quantity mentioned is of total no of switches and sockets which are to be mounted on a switch board. Make : Anchor/Vimal/As per instructions of engineer incharge.Model : ROMA. |
| 206 | Supply and fixing of 5A , 5Pin Socket with 5A SP Switch with internal wiring ( using max 0.1mt wire ,2.5 Sqmm-Phase , Neutral and Earth each ) on the Switch Boards and as per the instructions of Engineer in charge. Make : Anchor/Vimal/As per instructions of engineer incharge.Model : ROMA. |
| 207 | AC Distribution Board- Supply and installation onwall , with Transparent Coverwith 4 Sides cable entry provision and 125 Amps ,TPNMCCB with ELR provision in Incomer, and 8Nos of DPMCB of 32Amps suitable for 415/230V , 50Hz Supply in each Phase,as outgoings.This includes supply of internal wiring / bus bar. and 2Nos Earthing points and earthing Bus Bar. including the caution /Danger Notice. printed on surface of the AC Distribution board. |
| 208 | SERVICE DB - Supply and installation in wall ,Flush Mounted Type DB, with Transparent Coverwith , 2+ 24ways provision ,415 / 240V AC, 50 Hz with 40A DP, RCCBC Curve as Incomer and 5Nos, 20 A DP MCBs and 5 Nos,10 A DP MCBs, ( All 6KA, C Curve ) as outgoings.This includes supply of internal wiring / bus bar. This also includes supply and fixing of 2 Nosdummies forSP MCB. |
| 209 | SERVICE DB - Supply and installation in wall ,Flush Mounted Type DB, with Transparent Coverwith , 2+ 24 ways provision ,415 / 240V AC, 50 Hz with 100A DP, RCCBC Curve as Incomer and 4Nos, 40 A DP MCBs and 4 Nos,20 A DP MCBs, ( All 6KA, C Curve ) as outgoings.This includes supply of internal wiring / bus bar. This also includes supply and fixing of 2 Nosdummies forDP MCB. |
| 210 | SERVICE DB - Supply and installation in wall ,Flush Mounted Type DB, with Transparent Coverwith , 2+ 16 ways provision ,415 / 240V AC, 50 Hz with 40A DP, RCCBC Curve as Incomer and 5Nos, 20 A SP MCBs and 5 Nos,10 A SP MCBs, ( All 6KA, C Curve ) as outgoings.This includes supply of internal wiring / bus bar. This also includes supply and fixing of 2 Nosdummies forSP MCB. |
| 211 | 3 phase SERVICE DB - Supply and installation in wall ,Flush Mounted Type DB, with TransparentCoverwith , 4+ 18ways provision ,415 / 240V AC, 50 Hz with 63A TPN, RCCBC Curve as Incomer and 5Nos, 20 A DP MCBs and 4 Nos,10 A DP MCBs, ( All 6KA, C Curve ) as outgoings.This includes supply of internal wiring / bus bar. This also includes supply and fixing of 2 Nosdummies forDP MCB. |
| 212 | Main DB as per EIC ( powder quoted panel enclosure).250 Incomer MCCB with ELR protection(TPN)-1No,out goings (TPN) with ELR protection -125A-03Nos and other outgoingsDP MCB\"s 32A-18 nos with one 3 phase Energy meter. Panel should be as per latest IS standards following CEAR 2010. |
| 213 | Main DB as per EIC ( powder quoted panel enclosure).315A Incomer MCCB with ELR protection(TPN)-1No,out goings (TPN) with ELR protection -125A-03Nos and 63A-7 nos with one 3 phase digital Energy meter. Panel should be as per latest IS standards following CEAR 2010. |
| 214 | MAIN DB - Wall mounted Type Main DB in dust and vermin proof, made of 2mm thick MSSheet enclosure. The DB Shall have 2 Nos. hinged Double Door with mecahnical locking arrangement ( One No. of MCCB with ELR protection and One No. Door with transparent sheet for Energy Meter cum DP compartment ) and one No. door Screw fixing type as per the drawing enclosed. The DB should be painted with two coats of Red Oxide and two Coats of Siemens Grey enamel paint. It shall have the following . a). Incomer TPN MCCB, 125 A - Make : Standard / Indo Asian / L&T / C&S. b )Outgoings : i ). DP MCBs, 40A, C Curve - 8 Nos. Make : Standard / Indo Asian / L&T / MDS. ii ) 10 - 40 A Single phase Disc Type Energy Meter, Make : Universal / L&T / Secure.6 Nos. iii ) 4 x25mm x 6mm Copper Bus Bars for R, Y , B and N mounted on suitable insulators.a). Incomer TPN MCCB125 A with ELR protection. - Make : Standard / Indo Asian / L&T /C&S. b )Outgoings : i ). DP MCBs, 40A, C Curve -08 Nos. Make : Standard / Indo Asian / L&T / MDS. ii )SP MCBs, 10A, C Curve -01 No. Make : Standard / Indo Kopp / L&T / MDS. DP c) 10 - 40 A Single phase Disc Type Energy Meter, Make : Universal / L&T / Secure. 6 Nos.d ) 4 x25mm x 6mm Copper Bus Bars for R, Y , B and N mounted on suitable insulators.e ) Wiring : i) Connection from MCCB to Bus Barswith 35 Sq mm flexible multi strand, PVC insulated Copper wire with Flat and Bottle type crimping type sockets. ii ) Connection from Bus bars to outgoing 40 A DPs by 10 Sq mm multi strand, PVC insulated Copper wire with flat and Bottle type sockets, crimping type. iii) Connection fromOutgoing DPs to Energy Meters with 10 Sq mm multi strand PVC insulated copper wire with flat and Bottle type crimping socketsf ) Earth connections : Min 12 mm bolts with nuts, washers to be provided on either side of the DB. g ) Detachable Gland Plates for incoming cable at the bottom of the DB should be prohibited. On top of the DB provisions shold be kept for entry of 25mm PVC concealed conduits, 12 Nos.h ) DB should be provided in frontwith Danger Board of suitable size and written in Engish and Telugu. |
| 215 | Supply and Installation of Outdoor type lighting panel with automatic ON & OFF of lights through timer and twilight switch. Incomer (TPN)-125A with ELR protection-1 No, Outgoings - 63 Amps - RCCB- 4 Nos ( Indicating lamps, selector switches and other accessories etc) |
| 216 | Supply, installation and commissioning of single phase energy meter of range (5-60Amps) with Canopy box and provision of seal |
| 217 | Supply, installation and commissioning of three phase energy meter of range (5-60Amps) with Canopy box and provision of seal |
| 218 | Point wiring with1.1 KV grade 3 x 1c x 1.5 Sq mm multi stranded PVC insulated and sheathed Copper conductor cable through heavy gauge 25mm dia( 3mm thick) PVC concealedconduit( Nandi / Sudhakar make ) suitable for conduit wiring in wall / ceiling from 14 SWG MS switch board and then to the following type lighting fixtures, fans, calling bell etc. including supply and fixing of concealedcircularJB.This includes supply and fixing of all cabling and PVC conduit and required condit accessories, white perspex cover for PVC JB, ,MS Switch boards withmodular switches ,Ceiling roses (cream colour),CallingBell push,Anguar Holder, Nylon Round Blocks for T / L fittings, Ceiling Roses and , Angular holders, concealed type Fan Hook in metal enclosure, PVC insulated 3 core 1.5 SqmmFlexible copperwire ( Red, Black and Green ) for T/L connection from Ceiling Rose,This also includes supply of all required hard wares. Red / Yellow / Bluewire for Phase, Black for Neutral and Green for Earthing should be used.Average 8Mts should be considered for each point. . Also note that in Switch Boards as per the instructions of Engineer incharge , 1 No spare Switch should be fixed for which no extra payment will be given. |
| 219 | a)Fan (Ceiling / Exhaust) Point |
| 220 | b)T/L / Bulk head fitting / led fittings point |
| 221 | c) Calling bell point. |
| 222 | d) 90W led |
| 223 | Supply and installation of 1.1kv grade 4 x 1/C x 16Sq.mm,.+ 1 x 1/C-6 Sq.mm.for earthing multi strandCopper Conductor cablethrough heavy duty 25mm dia FlexiblePVC Conduit of 3mm thick concealed in wall / ceiling from Energy Meter in MainDB to Service DB .This includessupply and fixingof conduit with all accessories like JBs, Bends.( Nandi / Sudhakar make ), Circular JB with covers3mm white perspex sheetin wall for concealed wiring.The wire should br Red / Yellow / Blue for phase, Black for Neutral and Green for Earth. This also includes supply of all required hardwares. NOTE : 1Mt = 4 Runs of 25Sqmm Wire( For 3Ph & N)+ 1 Run of 10 Sqmm wire for Earth. ( Qty taken as double run ) |
| 224 | Supply and installation of 1.1kv grade 2 x 1/C x 10 Sq.mm,.+ 1 x 1/C-6 Sq.mm.for earthing multi strandCopper Conductor cablethrough heavy duty 25mm dia FlexiblePVC Conduit of 3mm thick concealed in wall / ceiling from Energy Meter in MainDB to Service DB .This includessupply and fixingof conduit with all accessories like JBs, Bends.( Nandi / Sudhakar make ), Circular JB with covers3mm white perspex sheetin wall for concealed wiring.The wire should br Red / Yellow / Blue for phase, Black for Neutral and Green for Earth. This also includes supply of all required hardwares. NOTE : 1Mt = 2 Runs of 10 Sqmm Wire( For Ph & N)+ 1 Run of 6 Sqmm wire for Earth. |
| 225 | Supply and installation of 1.1kv grade 2 x 1/C x 4 Sq.mm,.+ 1 x 1/C-4 Sq.mm.for earthing multi strandCopper Conductor cablethrough heavy duty 25mm dia FlexiblePVC Conduit of 3mm thick concealed in wall / ceiling from SDB to Switch Boards and 15 A Switch & Socket Board( in Hall, Dining Hall, Kitchen, Bed Room 1and Bed Room 2,) as per the drawing .This includessupply and fixingof conduit with all accessories like JBs, Bends.( Nandi / Sudhakar make ), Circular JB with covers3mm white perspex sheetin wall for concealed wiring.The wire should br Red / Yellow / Blue for phase, Black for Neutral and Green for Earth. This also includes supply of all required hardwares. NOTE : 1Mt = 2 Runs of 4 Sqmm Wire( For Ph & N)+ 1 Run of 4 Sqmm wire for Earth. |
| 226 | Supply and installation of 1.1kv grade 2 x 1/C x 2.5 Sq.mm,.+ 1 x 1/C-2.5 Sq.mm.for earthing, multi strandCopper Conductor cablethrough heavy duty 25mm dia PVC Conduit of 3mm thick concealed in wall / ceiling to 5A Switch& Socket on seperate Switch Board, Switch Boards in Balcony 1 & 2 ,Toilet and from nearest Switch Board/ Lighting JB and connection.This includessupply and fixingof conduit, conduit accessories, PVC insulated multi strand copper conductor cable& all required hardwares, copper lugs, ferrules etc. The wire should be Red / Yellow / Blue for phase, Black for Neutral and Green for Earth. This also includes supply of all required hardwares. NOTE : 1Mt = 2 Runs of 2.5 Sqmm Wire( For Ph & N)+ 1 Run of 1.5 Sqmm wire for Earth. |
| 227 | Supply and laying of1.1 KV grade PVC insulatedround wire armoured3 1/2 C/4Cx 185 Sq mm Stranded Aluminium cable in underground trench of 760mm deep and 760mm wide in single tier formation including trench excavetion and back filling with bricks ( 15 bricks per mt ) and sand protection , Cable Route Markers with supply of bricks and sand.To be laid from Over head Line / LT Panel in S/Sto Feeder Pillar Box.. Connection on O/H Line / LT Panel in the S/S. |
| 228 | Supply and laying of1.1 KV grade PVC insulatedround wire armoured3 1/2 C/4Cx 70 Sq mm Stranded Aluminium cable in underground trench of 760mm deep and 760mm wide in single tier formation including trench excavetion and back filling with bricks ( 15 bricks per mt ) and sand protection , Cable Route Markers with supply of bricks and sand. This is to be laid from FPB to Main DB/Lighting DB in the Building/parking shed. |
| 229 | Supply and laying of1.1 KV grade PVC insulatedround wire armoured3 1/2 C/4Cx 50 Sq mm Stranded Aluminium cable in underground trench of 760mm deep and 760mm wide in single tier formation including trench excavetion and back filling with bricks ( 15 bricks per mt ) and sand protection , Cable Route Markers with supply of bricks and sand. This is to be laid from FPB to Main DB/Lighting DB in the Building/parking shed. |
| 230 | Supply and laying of1.1 KV grade PVC insulatedround wire armoured4 C x 16 Sq mm Stranded Aluminium cable in underground trench of 760mm deep and 760mm wide in single tier formation including trench excavetion and back filling with bricks ( 15 bricks per mt ) and sand protection , Cable Route Markers with supply of bricks and sand. This is to be laid fromlighting DB to 4pole Junction Box in the car parking shed and in between street light poles and lighting mast. |
| 231 | Supply and connections of 4CX10Sq.mm Alumnium Armour cable cables for out door landscape lighting frommDistributio Board, upto lighting accessories and junction boxes , gland lugs etc.,Cable trench should be incthe depth of 760mm and bricks to be placed on the cable and back filling. Cable routemarkers should be provided at burried cable areas. |
| 232 | Finishing including equipmentconnection on both ends includingsupply of DC Compression gland and lugs of Dowells make.( 1 Set = 1 No Gland, 3 Nos Lugs for Main Core and 1 Lug for Neutral ) |
| 233 | a) 3 1/2 /4C x 50 Sq mm Cable. |
| 234 | b) 3 1/2 /4C x 70 Sq mm Cable. |
| 235 | c) 3 1/2 /4C x 185 Sq mm Cable. |
| 236 | d) 4CX 16Sqmm Cable. |
| 237 | Supply and installation ofFloor Mounted OUT DOOR TYPE FEEDER PILLAR BOX withCanopy. The FPB should be provided with3ph,4 wireEnergy meter ( Alstom / Bentek / Universal make) andwith CTs ( Kappa) of ratio 400 / 5 A, with Aluminium Bus Bar of size suitable for 400 A, complete wiring ( PVC insulated Copper wire of 50Sq mm.The FPB should be made of 2.5mm thick sheet steel. FPB should be given 2 coats of primer and 2 coats of Smoke grey enamel paint.The FPB shouldbe provided with Min 12 mm Bolts with nuts and washers on either side for Earth strip connection. This includes preparation of Brick foundation including supply of bricks, sand and cement. The foundation should be two parallel foundations1 Mt heightfrom ground level and plastering. This includes supply of all hard wares.a) Main Incomer- 630 A TPN SFU/MCCB - 1 No. (Siemens / /C&S/Indo Asian )b) Outgoing Feeders- 10 Nos -125 Amps TPN, 2 Nos - 250A SFUMain Bus bar- 50 x 10 Al-bus Cable- 50 Sq.mm PVC insulated Copper for connection from Bus Bars to Outgoing Feeders Make of components : HRC fuse & SFU/MCCB - Bussman/Indo Asian / Siemens/ C&S.Note:- The feeder pillar Box should be OUT DOOR TYPE with locking arrangements. FPB of Suitable dimension provided with Gland plate, with sufficient space inside and below FPB for cable terminations. The Incoming Cable will be 3 1/2 C x 185 Sqmm armouredAl Cable. with all electrical accessories. 25 mm x 6 mm Al Bus bars mounted on suitable insulators shloud be provided for outgoings.The FPB should be provided with Danger Board of suitable size written in English and Telugu. |
| 238 | Supply installation and commissioning of distribution panel. Panel must consists of400A MCCB as Incomer and it must have a provision for termination of 3.5c x 185 sqmm cable( 4.5 runs) for feeding to different panel as outgoings. Panel to be manufactured as per latest IS standards for outdoor applications. MCCB must have provision with O/C and E/F with all required auxiliaries that are required for tripping during fault condition. All civil and electrical works that re required for supply , installation and commissioning of distribution panel is in the scope of contractor. |
| 239 | Supply and installation ofFloor Mounted OUT DOOR TYPE FEEDER PILLAR BOX withCanopy. The FPB should be provided with3ph,4 wireEnergy meter ( Alstom / Bentek / Universal make) andwith CTs ( Kappa) of ratio 400 / 5 A, with Aluminium Bus Bar of size suitable for 400 A, complete wiring ( PVC insulated Copper wire of 50Sq mm.The FPB should be made of 2.5mm thick sheet steel. FPB should be given 2 coats of primer and 2 coats of Smoke grey enamel paint.The FPB shouldbe provided with Min 12 mm Bolts with nuts and washers on either side for Earth strip connection. This includes preparation of Brick foundation including supply of bricks, sand and cement. The foundation should be two parallel foundations1 Mt heightfrom ground level and plastering. This includes supply of all hard wares.a) Main Incomer- 400 A TPN SFU/MCCB - 1 No. (Siemens / /C&S/Indo Asian )b) Outgoing Feeders- 8 Nos -125 Amps TPN, SFU with HRC fuses /MCCB with Main Bus bar- 50 x 10 Al-bus,Cable- 50 Sq.mm PVC insulated Copper for connection from Bus Bars to Outgoing Feeders .Make of components : HRC fuse & SFU/MCCB - Bussman/Indo Asian / Siemens/ C&S.Note:- The feeder pillar Box should be OUT DOOR TYPE with locking arrangements. FPB of Suitable dimension provided with Gland plate, with sufficient space inside and below FPB for cable terminations. The Incoming Cable will be 3 1/2 C x 185 Sqmm armouredAl Cable. with all electrical accessories. 25 mm x 6 mm Al Bus bars mounted on suitable insulators shloud be provided for outgoings.The FPB should be provided with Danger Board of suitable size written in English and Telugu. |
| 240 | Feeder Pillar box for club and guest house as per EIC,Incomer (TPN) MCCB with ELR protection -630Amps and out goings(TPN) with ELRprotections -315A -2Nos 250A-1No ,125A -1No. |
| 241 | Supply and erection of Lighting Junction Boxes, junction Boxes should have 6A DPMCB and 4TBs are mounted on a channel for incoming of 16Sqmm Cable. JB should be designed as such it must be suitable forone incoming cable and two outgoing cables.DPMCB should be projectedout side of JB for switching ON and off. JB shall as per EIC |
| 242 | Supply, installation and commissioning of street light pole of 11 mtr height as instructed by EIC and following CEA rules and regulations. 40MM MS rod to be considered for earthing of street light JB and pole. Eartning has to be done as per latest CEA regulations for earth pit. All the required civil and electrical works which are required for street light erection and commissioning is in the scope of contractor. Fixing of 90W led street light is also in the scope of contractor |
| 243 | Supply, installation and commissioning of 25 mtrs high mast lighting. GeM Specfication sheet is enclosed for reference. All civil and electrical works are in the scope of contractor |
| 244 | Supply & installation of earthing pit using pipe earth electrodes as per latestIS by manually digging / blasting / boring as per the instructions of the Engineer in charge andbringing the surface to original finish. This includes supply of salt and charcoal or by chemical treatment. The earth pit shall be strictly in accordance with the electricity act 2003 and latest cea regulations.The earth electrodes should be interconnected. The Earth Pits should be painted whiteand Pit No. marked with paint. The Earth Pit should be covered with CI door of 8 mm thick. The door should be placed on a frame madeof 25 mm MS Angle and embedded in the brick chamber which includes supply of MS farme. This also includes supply and construction of Brick chamber. This also includes supply of all GI hard wares for connection. The Earth GI Pipe to be supplied by the contractor should be 50mm dia, 3 Mt long, 3.63mm thick,Class B GI Pipe.The GI Pipe should be got approved before installing from the Engineer in charge. |
| 245 | Supply and laying of GI Pipe in ground / concrete / wall as per the instructions of Engineer in charge |
| 246 | a) 32mm dia GI Pipe medium class |
| 247 | b ) 40mm dia GI Pipe medium class |
| 248 | Supply and laying of 25 x 6mm GI Flat in trench excavationl. This includes trench excavation, laying of GI Flat , supply of bricks ( 3 Bricks per mt )and sand protection ,refilling of the trenchas per the instructions of Engineer in charge ( quality of sand and bricks to be got approved by UCIL).. To be laid between Feeder Pillar Box and Earth pits and connection and FPB to Main DB.. |
| 249 | Supply & installation of earthing pitLIGHTNING PROTECTION using pipe earth electrodes as per latestIS by manually digging / blasting / boring as per the instructions of the Engineer in charge andbringing the surface to original finish. This includes supply of salt and charcoal. The earth pit shall be strictly in accordance with the drawing attached.The earth electrodes should be interconnected. The Earth Pits should be painted whiteand Pit No. marked with paint. The Earth Pit should be covered with CI door of 8 mm thick. The door should be placed on a farme madeof 25 mm MS Angle and embedded in the brick chamber which includes supply of MS farme. This also includes supply and construction of Brick cahmber. This also includes supply of all GI hard wares for connection. The Earth GI Pipe to be supplied by the contractor should be 50mm dia, 3 Mt long, 3.63mm thick, Class B GI Pipe. Insulatorsalos to be considered for laying as per EIC. |
| 250 | Supply &fixing StandardCopperair terminals having 15mm dia,1.5 Mt long with 1 dischargepoints . This should have terminals for terminating 4 SWG GI wire at the bootom.The fixing should be done as per the instructions of Engineer in charge. |
| 251 | Supply and fixing horizontal runs and vertical runs with 4 SWG wire on roof / parapet/ wall / in ground through GI Pipe with 40mm long GI staples Spaced not exceeding 1 M (3\") apart including making good all damages to building works. This includes supply of GI Staples and all hard wares. This also includes connections to Earth electrodes, GI Link, Lightning Arrestor. |
| 252 | GI Linkswith accessories. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
