|
| 1 | Renovation Work in the Existing Building of Surgery Ward at M.L.B. Medical College at Jhansi (U.P.) |
| 2 | SURGERY WARD BUILDING |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead.Of area beyond 3 sq. metres : |
| 7 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) |
| 13 | Removing white or colour wash by scrapping and sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete |
| 14 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 15 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 16 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 17 | Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement :3 coarse sand ) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T & P required for proper completion of the work. |
| 18 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor). |
| 19 | Providing & fixing ISI marked flush door shutters conforming IS: 2202 decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters(a) 35mm thick including ISI marked stainlesssteel butt hinges with necessary screws.Both side laminated. (i) Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) (ii)Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 20 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 21 | Decorative ceiling tiles: Providing and fixing in position decorative ceiling tiles suspended from the roof with the help of flat iron Hangers of size 3.0 mm x 45 mm. on under side leaving an expansion gap of 6 mm and with provision for providing necessary lighting fixtures including three cost of felt oil paint of approved quality and shade and a coat of pink prime/copal varnish of the side facing the roof as per direction given by Engineer-in charge. |
| 22 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to eachother with bitumen @ 1.7 kg/sqm). |
| 23 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin- charge.(Payment of providing and fixing auto closing hinges shall be paid separately) |
| 24 | Wooden Partition: Providing and fixing in position 19 mm thick single skin partition with fibre or particle board frame of 900X400 mm section of 75 mm X 19 inm and fixing (Paneled type) 19 mm thick teak wood particle board bounded with phenol formaldehyde synthetic resin both face commercial confirming to I.S.I specification No.3097-1980 as per drawing complete with painting/French polish/Wax polish or as per direction given by Engineer-in-charge. |
| 25 | Providing and fixing 12 mm (1/2\") thick and 100 mm. (4\") wide Pelmet with 25mm. (1\") diameter wooden curtain rod and brackets top covered with same wood plank 12mm(1/2\") thick including fixing with 25 x 3 mm. (1\" X 1/8\") M. S. flat 10 cm. (4\") long and plugs etc, complete with painting polishing or oiling as required. B- Shisham Wood |
| 26 | Supply & Iilling of cinder in sunken portion of buildrng including breaking inlo required sizes including supply of all material. labour, T8P required sizes including supply of all malerial. labour, l\"8P required for proper completion oi work |
| 27 | Supply and fixingP/L (whitc/coloured) Kajaria tiies, Ceremic Ramano tites flooring over 20 mm(av.) thack basc o, cemont mortar 1:4:li cement:4 coarse sand) taid and jointed with white cement (with pigmenl) slurry ancluding rubbing arr doolishino comolet |
| 28 | Fixing Panes of glass with equal or equlvalent l.S.l marked quality putty. brads and sprlngs and including supply of all materlals and labour etc complete. (b) 3.2 to 4 nrm thick |
| 29 | Supply of M.S. Grill of a approved quality and drawing made ofllat iron not bigger then 20x4 mm size including supply of materials,Iabrication, labour, T&P and also one coat of red oxide paint complctc in all respect as per direction of Engineer-in charge |
| 30 | Providing and fixing double glazed hermetically sealed glazing inaluminium windows, ventilators and partition etc. with 6 mm thickclear float glass both side, having 12 mm air gap, including providingEPDM gasket, perforated aluminium spacers, desiccants, |
| 31 | Aluminium sheet for expansion joint |
| 32 | Providing and laying the Epoxy flooring 2mm to 3mm thick over primary coat including all material labour T&P etc including rubbing, cleaning, privious floor including all for proper comletion of work as per directed by Engineer in charge. |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 34 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 35 | INTERNAL W/S AND SANITATION |
| 36 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:-White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 37 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 38 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe40 mm dia |
| 40 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore |
| 41 | 45 cm length 15 mm nominal bore |
| 42 | Providing and fixing CP Brass 32mm/40mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 43 | Providing and fixing toilet paper holder. C.P. brass |
| 44 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 45 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 46 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 48 | Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects. (Angle valve to be provide under item no. 18 and measure with that item.) |
| 49 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm |
| 50 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Coupler 110 mm |
| 51 | Bend 87.5 degree 110 mm Bend |
| 52 | Shoe (Plain) 110 mm Shoe |
| 53 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 54 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. |
| 55 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 110mm dia pipe. |
| 56 | Providing, fixing, jointing and testing,uPVCSWR pipes, - type B conforming to IS : 13592to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. 110 mm dia. |
| 57 | Providing and fixing SWR PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110mm x 110mmX110mm |
| 58 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (87.5°) 110mm |
| 59 | Bend without door (45°) 110mm |
| 60 | Y\" Fitting without door 110mm |
| 61 | Single Tee without door 110 mm |
| 62 | Coupler 110mm |
| 63 | Vent Cowl 110mm |
| 64 | Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc.For Wash basin & Urinal 50mm dia. Pipe |
| 65 | 40mm dia. Pipe (for wash basin & sunken toilet spout) |
| 66 | Elbow (90°) 50mm |
| 67 | Elbow (90°) 40mm |
| 68 | Elbow (45°) 50mm |
| 69 | Elbow (45°) 40mm |
| 70 | T fitting 50mm |
| 71 | T fitting 40mm |
| 72 | Coupler50mm |
| 73 | Coupler40mm |
| 74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia nominal bore |
| 75 | 20 mm dia nominal bore |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm dia nominal bore |
| 77 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 20 mm dia nominal bore |
| 78 | 25 mm dia nominal bore |
| 79 | 32 mm dia nominal bore |
| 80 | 40mm dia nominal bore |
| 81 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 20 mm dia nominal bore |
| 82 | 25 mm dia nominal bore |
| 83 | 32 mm dia nominal bore |
| 84 | 40mm dia nominal bore |
| 85 | Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore |
| 86 | 25mm dia nominal bore |
| 87 | 32mm dia nominal bore |
| 88 | 40mm dia nominal bore |
| 89 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. |
| 90 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm.dia. RCCPipes |
| 91 | Providing and laying NonpressureNP 2 class (light duty) RCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : 2 finesand ) includingtestingof joints etc. complete. 150 mm.dia. RCCPipes |
| 92 | Providing and fixing square-mouth S.W. gully trap SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 93 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: 100 mm diameter |
| 94 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 95 | Extra for depth for manholes:Size 90x80cmWith common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 96 | Providing orange colour safety footrests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 97 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :- (EXTERNAL WATER SUPPLY) All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. |
| 98 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore |
| 99 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 32 mm dia nominal bore |
| 100 | Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 32 mm dia nominal bore |
| 101 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 32 mm dia nominal bore |
| 102 | Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. 4.5kg capacity cylinder. |
| 103 | ABC type extinguisher with cylinder fully charged with 6 Kg. capacity. |
| 104 | INTERNALELECTRIFICATION |
| 105 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 106 | Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed midium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 107 | Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthingas required. |
| 108 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire |
| 109 | 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire |
| 110 | 4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire |
| 111 | 4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire |
| 112 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 113 | Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps switch |
| 114 | 15/16 amp switch |
| 115 | 3 pin 5/6 amp socket outlet |
| 116 | 6 pin 15/16 amp socket outlet |
| 117 | Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 118 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 119 | Installation of exhaust fan in the existing opening , including making good the damage, connection, testingcommissioning etc. as required. (a): Up to 450mm sweep |
| 120 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 121 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM(tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.1200 mm sweep ceiling fan |
| 122 | Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 123 | Supply ofrecess/Surface mounting round 8 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respec. |
| 124 | Supply of LED Tube Light 40 watt Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. |
| 125 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double door (4 + 24) |
| 126 | Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. For 8 way, Double door TPN MCBDB |
| 127 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 128 | Supplying and fixing 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A 4P |
| 129 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 130 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 131 | Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. |
| 132 | EXTENSION WARD BLOCK |
| 133 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil 0.00 LVL. TO 1.50 MTR. |
| 134 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 135 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 136 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameterholes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor. With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration. |
| 137 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Ground Floor |
| 138 | First Floor |
| 139 | As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete). All works above plinth level Ground Floor |
| 140 | First Floor |
| 141 | As in item 6 but for thelighterbeams i.e. having spans upto 6 m. All works above plinth level Ground Floor (Upto Plinth Lvl.) |
| 142 | Ground Floor (Above Plinth Lvl.) |
| 143 | First Floor |
| 144 | As in item 6 abovebut inR.C.C.Raft foundation and footingwithapproved stoneballast. (Using1:1.5:3Mix concrete) All works upto plinth level |
| 145 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : All works above plinth level Ground Floor (Upto Plinth Lvl.) |
| 146 | Ground Floor (Above Plinth Lvl.) |
| 147 | First Floor |
| 148 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) Ground Floor |
| 149 | First Floor |
| 150 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) First Floor |
| 151 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. First Floor |
| 152 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level.Ground Floor |
| 153 | First Floor |
| 154 | 15 mm thick plinth plaster [1 cement : 4 coarse sand] |
| 155 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) Ground Floor |
| 156 | First Floor |
| 157 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) Ground Floor |
| 158 | First Floor |
| 159 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.Per bag of 50 kg cement used in the mix Ground Floor |
| 160 | First Floor |
| 161 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Ground Floor |
| 162 | First Floor |
| 163 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. (FLOORING) Ground Floor |
| 164 | First Floor |
| 165 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.Ground Floor |
| 166 | First Floor |
| 167 | Providing & fixing ISI marked flush door shutters conforming IS: 2202 decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters(a) 30mm thick including ISI marked stainlesssteel butt hinges with necessary screws.Both side laminated. (i) Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (Part I) 1.5 mm thick (ii)Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (Total thickness of Door 30+1.5+1.50 mm = 3.30 mm) (b) Double leaf |
| 168 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR - 21.1.2.1) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (a) Sal wood (DSR - 9.1.2) |
| 169 | Providing and fixing double glazed hermetically sealed glazing inaluminium windows, ventilators and partition etc. with 6 mm thickclear float glass both side, having 12 mm air gap, including providingEPDM gasket, perforated aluminium spacers, desiccants, sealant(Both primary and secondary sealant) etc. as per specifications,drawings and direction of Engineer-in-charge complete |
| 170 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces Ground Floor |
| 171 | First Floor |
| 172 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (Asian Paint or equivalent) Ground Floor |
| 173 | First Floor |
| 174 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Ground Floor |
| 175 | First Floor |
| 176 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. |
| 177 | Providing and fixing Stainless steel 304 grade sliding door bolts, of 16mmx250mm solidrod with required nuts, screws, keeper, etc. all itemto s.s. 304 grade only and supplied along with material test certificate. (OZ-ALD-01(16x250mm) |
| 178 | Providing and fixing Stainless steel 304 gradetower bolts (barrel and plate type) with required nuts, screws, keeper, etc. all itemto s.s. 304 grade only and supplied along with material test certificate.(a) 300 mm x 10mm -(OZ-TB-S-12\" ) |
| 179 | (b) 250 mm x 10mm (OZ-TB-S-10\" ) |
| 180 | Providing and fixing Stainless steel 304 grade handles with platefixed with S.S. screws,etc. complete of size 10mm 125mm all itemto s.s. 304 grade only and supplied along with material test certificate. (ODG-11-10x125) |
| 181 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 182 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete |
| 183 | Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick |
| 184 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 185 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 186 | Supply & apply of \"PS\"make floor cover which is designed for interior application Suitable for most floor finishes where frame depth and configuration is variable to suit selected finish.It is a gasketed floor to floor joint cover comprised of extruded aluminum frames and a TPR seal. 1.Extrusion :base frame extruded with 6063-T5, ASTM B221. 2.Gasket : Dual Durometer 65 Shore A, 90 Shore A, ASTM D2000 3.PS model : PFT 200 Movement: Nominal Joint Width: 51mm Minimum Joint Width: 38mm Maximum Joint Width: 64mm Exposed Surface : 48mm |
| 187 | Supply and Apply of PSFflush metal and gasketed cover is designed for exterior applications where low-maintenance or tamper-resistant applications are desired.This exterior gasketed, seal cover is designed to offer multi-directional movement in vertical wall applications where weather protection is critical. The primary Santoprene™ seal is available in four standard colors. A secondary seal is added to ensure weather tightness. Wall-to-Wall Joint Systems: 1.Basis-of-Design Product: Pinnacle Solutions. model PSF 1.Type: Snap-on cover.a.Exposed Metal: Gasketed, flush coverSecondary seals provided: Polyethylene, PVC or polyethylene 2.Movement: Nominal Joint Width: 50mm Minimum Joint Width: 32mm Maximum Joint Width: 76mm Exposed Surface : 50mm |
| 188 | PRI-200 is a aluminum roof cover which is ideal for seismic applications and ensures a watertight transition where exterior wall seals are installed. The system is available with custom, factory-made transitions to ensure watertight results. • Extrusion: (6063-T5, T6, T52) (6061-T5, T6, T51) (6105-T5, T6) (6005-T5) (6005A-T5, T61), ASTM B221• Sheet – 19000 M, 19000 H2, 31000 H2, 31000 H3, 1100/1200,As per IS 737/ ASTM B209 Roof Joint Systems:1. Basis-of-Design Product: Pinnacle Solutions. model PRI2. Type: cover-plate.3. Exposed Metal: Aluminum.4. Secondary Seal: EPDM water barrier5. Cover plate thickness : 2mm THK.6. Duroflex : Durometer – 80 Shore A, ASTM D20007. Movement: Nominal Joint Width: 50mmMinimum Joint Width: 25mmMaximum Joint Width: 92mmExposed Surface : 170mm |
| 189 | FURNITURE WORK & A.C. |
| 190 | Supply and installation of Large Size Steel Almirah for doccumentation purpose as per indian Standard 1/C labour, T&P and transportation charge. |
| 191 | Supply and installation of Steel Book case for official use as per indian Standard I/C labour, T&P and transportation charge. |
| 192 | Supply and installation of high back Revolving chair for Executive engineer for office use as per indian Standard 1/C labour, T&P and transportation charge. |
| 193 | Supply and installation of Visitor chair for office use as per indian Standard I/C labour, T&P and transportation charge. |
| 194 | Supply and installation of executive table for office use as per indian Standard 1/C labour, T&P and transportation charge. |
| 195 | Supply and installation of Curtains for office use as per indian Standard I/C labour, T&P and transportation charge. |
| 196 | Supply and installation of Air Conditioning system and Equipment and accessories split air conditioner including all labour, T&P and transportation charge. And as directed by Engineer in charge |
| 197 | GST Extra as per applicable |
