Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #43896146

Tender For Repair And Maintenance Of Steam Bath, Sauna Bath, Geyers, Solar Water Heater At Cme Under Ge (Cme) Khadki

Issued by Statutory Bodies & Commissions/Committees · Pune, Maharashtra
Tender Value
16 Lakhs
Estimated cost
Bid Submission
22 Jul 2024
0 days left
EMD
32000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair And Maintenance Of Steam Bath, Sauna Bath, Geyers, Solar Water Heater At Cme Under Ge (Cme) Khadki

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 15-Jul-2024 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 22-Jul-2024

BOQ

Name of Work:REPAIR AND MAINT OF STEAM BATH, SAUNA BATH, GEYSERS SOLAR WATER HEATER AT CME UNDER GE (CME) KHADKI
Sl. No. Item Description
1M & L for servicing solar water heater (Flat Plate collector/tube collector) by removing the flange plates, cleaning the top galss, collectors internally& externally by using descaling solution, removing the blockages in the collectors complete and refixing the flange plates, recharging the water in recharge tank testing for satisfactory function all as specified and directed.
2S & F heating element 25mm to 32mm dia, ISI marked for solar water heater of capacity 3 KWall as specified and directed by Engr in charge.
3S & F flange plates of size 25 mm dia suitable for flat plate collectors including taking down old unseviceable flange plate all specified and directed.
4S & F flexible heat resistance rubber pipe (from inter connect plate collector to hot water tank) of size 25 mm to 32 mm dia etc with fixing clamp etc complete all as specified.
5Taking down the collector from its position, removing the top glass of collector and carry out welding/brazing work to the collector and arresting the leakages in the collector, refixing top glass back with all sealing agent, testing for satisfactory function all as specified and directed.
6M & L for submain wiring with two runs of 4 sq mm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volts and including electrical grade PVC casing caping of desired colour not less than 1.2 mm and 25 mm wide & 4 sq mm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed including taking down old wiring.Note :- Three run of 4 Sqmm copper wire and one run of casing caping shall be measured as one length
7Steam Bath : Checking of electrical wire connection , level sensors, Heaters coil, earthing leakage, electronic circuits, control panel & safety arrangements of the water level & units. Cleaning the sensors, desacling of hard water tank, servicing ofelectrical, pneumatic valve, proper insulation for the boilers including replacement of defective spares and fixing the same with new including testing one etc complete.Note - (a)Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge.(b)During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt.(c)Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as \" Supply only\".
8Sauna Bath :-Checking of the heater coil, electronic temp control, calibrating temp device, accuracy, safety cut off the heater & cleaning the sensors of the electronic devices / equipments etc including replacement of defective spares and fixing the same with new including testing etc complete. Note -(a)Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge.(b)During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt.(c)Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as \" Supply only)
9Supply only 15 psi safety valve (Pressure relief valve)
10Supply only240 V 5 amps glass fuse
11Supply onlyauto drain solonied valve 12 volts 6 watts for steam bath.
12Supply onlywater inlet solonoid valve 12 volt 6 watts for steam bath
13Supply onlyBoiler insulation glass wool pad 25mm thick 40 Kg density with aluminium foil for steam bath
14Supply onlysteam generator power heating element 3KW for steam bath
15Supply only high limit temperature (i.e 105 degree) switch thermostat for steam bath/sauna bath
16Supply only temperature sensor including extension wire of length 6 metre for steam bath
17Supply only Digital Control steam processor circuit board for steam/Sauna bath.
18Supply onlystep down Transformer with dual output primary 230 V and secondary 35 Volt 5 Amps for steam bath.
19Supply onlyMains power Terminal 4 way connector 63 amps
20Supply onlysilicon heater washer
21Supply onlypower contactor 40 Amps 440 volts, 50 Hz
22Supply onlytemperature thermostat range 30 to 110 degrees.
23Supply only4 waychannel terminalstrip connector 32 Amps.
24Supply onlylow density industrial Saunaheating element S/S 2000 watt.
25Repair/checking of storage type water heater (geyser) of any capacity including replacement of required spares such as heating element thermostat, indicator, fusible plug dead weight,hot/cold water hose pipes incl any otherrepairs work at different locations within the CME all as specified and directed by Engr in charge for the Note : 1. Spare components will be mesaured and paid seperately. 2. Contractor will detail mechanic to AGE E/M complaint cell at 0900 daily to collect docket.
26Supply only thermostat complete with manually temperture settingknob extra long (11 inches) ISI marked suitable for geysers 25 liters to 50 liters capacity
27Supply only thermostat with auto cut-out knob complete at tripping 90 degree (+5%) Temperature of length (7 inches)ISI marked suitable for geysers 25 litresto 50 litres capacity.
28Supply only fusible plug ISI marked suitable for 25 to 50 litres capacity Geysers.
29Supply only safety valve (to be fixed on outlet connection) ISI marked suitable for 25, and 50 litres capacity geysers.
30Supply only heating element upto 2 KW as required at site including rubber washers (ISI Marked) suitable for Bajaj/Racold/Usha/Jaquar/Jilco/Crompton/ Havells make geyser complete.
31Supply only non return valve(NRV) brass of 15mm bore, after dismantling old unserviceable NRV of any size all as specified and directed.
32S & F Hot/Cold water flexible hose pipe 12/16mm dia and 450 to 900mm long heavy duty covered with metal wires heat resistence with both ends PVC hexagonal check nut with washer to fixed on 15mm dia GI pipe all as specified and directed.
33M & L for preparation of steel surface of geysers , apply putty to make the surface smooth/ even and applying one coat of synthetic enamel paint white including writing of MES Nos with black paint complete all as directed& forany size orcapacity of geysers .
34Taking down loose geysers of any capacity from store/site & installing the same at new location within the CME complete with grouting of bolts & all necessary pipe connections and making good the disturbed wall surfaces all as directed.Note :- spares if required shall be measured and paid separately.
35S & F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts.
36S & F GI tubing (Medium grade) with all fitting and fixed to complete on wall and ceiling or laid in trenches of size 15mm bore incl taking down old unserviceable one all as specified and directed.
37M & L for stop valve, cast copper alloy, screw down high pressure, crutch handle screwed both end for iron pipe, fancy type, chromium plated for 15mm bore pipe incl taking down old unserviceable one .
38M & L for Bib tap,fancy type, chromium plated for 15mm bore pipe
39S & F gasket rubber ring for heater plate of any size geyser.
40S & Findicator lamp of geyser 25-50 litres capacity of RED/GREEN colour.
41S & F PVC copper conductor cable 3 core 2.5 sq mm flexible multistranded 1100 V grade unsheathed cable.
42M & L for switch socket combination 2 in one 3 pin 16Amps 240 volts flush type complete all as speciied and directed.
43M & L for socket outlet 3 pin incl PVC enclosure 240 volts controlled by one MCB SP 25 Amps, Make Havells or equivalent complete all as specified and directed.
44M & L for Metal clad industrial plug top of cap 16 Amps
45M & L for plug top porcelein 3 pin 15/16A 230 V AC supply
46Supply and laying in replacement of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for outer dia 16mm complete all as specified.
47Supply and fix in replacement ball valve suitable for 16mm dia CPVC pipe complete all as specified and directed.
48Supply and fix in replacement brass elbow suitable for 16mm dia CPVC pipe complete all as specified and directed.
49Supply and fix in replacement brass tee suitable for 16mm dia CPVC pipe complete all as specified and directed.
50M&L for lagging to pipes used for hot water supply 15 to 25mm dia or plumbing all round with 25mm thick bonded mineral wool pre-formed \"SNAP ON\" pipes section of density 144 Kg/Cum, incl chiken mesh netting of 20mm mesh and0.01mm thick aluminium foil cladding around the pipe complete all as specified and as directed by Engr-in-Charge.

AI Tender Summary

OUR REF NO 43896146
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 16 Lakhs
LAST DATE 22-07-2024
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair And Maintenance Of Steam Bath, Sauna Bath, Geyers, Solar Water Heater At Cme Under Ge (Cme) Khadki
Basic Detail
Tender No 8519/E8
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 15 Jul 2024
Submission Date 22 Jul 2024
Open Date 24 Jul 2024
Finance
Tender Value 16 Lakhs
Tender Fee 500
EMD 32000
Exemption Not Available
Document List
b8a595c2-ecca-4888-9b2b-460d33dc3fbd.html
8519tenderdocu.pdf
BOQ_740618.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 15, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 22, 2024
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 22, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 24, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b8a595c2-ecca-4888-9b2b-460d33dc3fbd.html

pdf

8519tenderdocu.pdf

xls

BOQ_740618.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders