Tender For Construction Of Samajik Sabhagraha (Dome) In Mahadeo Mandir Campus At Shelgaon, Tq. Kannad Dist. Chh. Sambhajinagar
Tender Value
39.12 Lakhs
Estimated cost
Bid Submission
03 Jul 2024
0 days left
EMD
39125
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kannad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Samajik Sabhagraha (Dome) In Mahadeo Mandir Campus At Shelgaon, Tq. Kannad Dist. Chh. Sambhajinagar
BOQ
| Sl. No. | Item Description |
| 1 | [Part-A] WORK PORTION. : Excavation for FOUNDATION in EARTH, SOIL OF ALL TYPES, SAND, GRAVEL and SOFT MURUM, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. |
| 2 | Providing SOLING using 80 mm. size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete. |
| 3 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for FOUNDATION and BEDDING including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | Filling IN PLINTH and FLOORS with CONTRACTOR\"s MATERIAL / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 5 | Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. work in FOUNDATIONS like RAFT, STRIP FOUNDATIONS, GRILLAGE and FOOTINGS of R.C.C. COLUMNS and STEEL STANCHIONS etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. COLUMNS as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. BEAMS and LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 9 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 in FOUNDATIONS and PLINTH of inner walls / in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 10 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 in SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete. |
| 11 | Providing STRUCTURAL STEEL WORK in TRUSSES, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted / bolted / welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 12 | Supplying G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet as directed by Engineer in charge. |
| 13 | Providing and laying VITRIFIED MIRROR / GLOSSY FINISH TILES decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern FOR FLOORING in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 14 | Providing and fixing machine cut machine polished 18 mm. to 20 mm. thick TELEPHONE BLACK / AMBA WHITE / CAT BARY BROWN / RBI RED / OCEAN BROWN GRANITE STONE for TREADS and RISERS of STEPS and STAIRCASES of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. |
| 15 | Providing INTERNAL CEMENT PLASTER 20 mm. thick in SINGLE COATS in cement mortar 1:4 WITHOUT NEERU FINISH to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 16 | Providing and applying TWO COATS of EXTERIOR WEATHER SHIELD PAINT of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface ,applying primer coat, scaffolding if necessary and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary. |
| 17 | PROVIDING, LAYING, SPREADING and COMPACTION STONE AGGREGATES of specific sizes to WATER BOUND MACADAM SPECIFICATION including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. BY MECHANICAL MEANS - Grading-I (Using Screening Type A (13.2) mm Aggregate) |
| 18 | PROVIDING, LAYING, SPREADING and COMPACTION STONE AGGREGATES of specific sizes to WATER BOUND MACADAM SPECIFICATION including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with VIBRATORY ROLLER to the required density. BY MECHANICAL MEANS - Grading-II (Using Screening Type B (11.2 mm) Aggregate) |
| 19 | Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 20 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 21 | Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 22 | Providing bituminous Type-A LIQUID SEAL COAT on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 23 | Providing and fixing BOARD DISPLAYING INFORMATION, such as\"Name of work, Tender cost, Name of Contractor, Workcompletion and liability period etc\", having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mildsteel sheet painted with one coat of Zinc chromate stovingprimer and two coats of enamel paint on front side and greystove enamel on back side and border / messages / symbolsetc. with approved colour shade paint complete, on M.S.angleof size 35 x 35 x 3 mm frame with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 mlong painted with alternate black and white bands of 25 cmwidth including all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including,excavation, refilling, transportation, and labour etc complete.Spec. No. As directed by Engineer in Charge |
| 24 | [Part-A] WORK PORTION. |
AI Tender Summary
Tender Timeline
Jun 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender