Tender For Special Repair/Renovation Of Squash Court Complex Incl Two Squash Court P/Sc/2 In Ball Of Fire Environment Park And Trg Area Of Dogra And Provision Of View Cutter Near Dunn Bridge And Goc Sector Of Age B/R And Age E/M Under Ge Tenga
Tender Value
46.50 Lakhs
Estimated cost
Bid Submission
15 Jul 2024
0 days left
EMD
93000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenga Valley → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair/Renovation Of Squash Court Complex Incl Two Squash Court P/Sc/2 In Ball Of Fire Environment Park And Trg Area Of Dogra And Provision Of View Cutter Near Dunn Bridge And Goc Sector Of Age B/R And Age E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil. |
| 2 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation of RCC post or struts. |
| 3 | M&L For framed workin fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 4 | M&L forPreparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of black enamel paint over a coat of red oxide complete all specified and directed. |
| 5 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all specified and directed. |
| 6 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 7 | Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 9 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 |
| 10 | Material and labour for preparation of newsteel surfaces of any description, over 10 cm width or girth not other wise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all specified and directed |
| 11 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. |
| 12 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed |
| 13 | S&F of 40mm thick 1st class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats |
| 14 | S&F 30mm thick Flush shutters, solid core construction, with Particle board core core and plywood face panels, one face is covered with decorative face veneer withlipping/frame to match complete all specified and directed |
| 15 | M&L for Providing and fixing factory made uPVG white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractorincludes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 16 | M&L for 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. |
| 17 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed. |
| 18 | S&F2nd class hard wood30mm thick Glazed and skeleton shutters,divided into squared, with plain, chamfered or roun0ded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats |
| 19 | M&L for painting wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 20 | Supply and fix MS butt hinges medium weight, cold rolled 125mm size complete all as specified and directed. |
| 21 | Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. |
| 22 | Supply & fix Extruded brass handles,150mmfabricated type polishedcomplete all as specified and directed. |
| 23 | Supply & fix ,Brass, sliding door bolt 250mm with sand or die-cast brass hasp, staple (bolttype) and fixing bolt with rolled or drawn brass bolts and fixedomplete all as specified and directed. |
| 24 | Demolition of cement Concrete(Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed by engr in charge |
| 25 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge. |
| 26 | M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified. |
| 27 | S&F and repair in HDF laminate flooring 12mm thick make Action Tesa equivalent over Cushion foam suitable for laying wooden flooring including door seal, fillets andT seal for joints of wooden flooring |
| 28 | S&F HDF laminate skirting 100mm matching with shade of wooden flooring make Action Tesa and equivalent with complete all as specified and directed. |
| 29 | M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 30 | M&L of Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 31 | M&L for PCC type C-2, 1:3:6 (40mm graded stone agg)in 75mm thick plinth protection and path finishing surface even and smooth without using extra cement. |
| 32 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 33 | M&L for reinforced cement concrete type B1(using 20mm graded aggregate) in Beams complete all specified and directed |
| 34 | M&L TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qual |
| 35 | M&L TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qualit |
| 36 | M&L for flat Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 37 | Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed. |
| 38 | M&L for cleansawn Second class hard-wood scantlings with framed work.complete all specified and directed |
| 39 | Material and labour for preparation of newplywood and wood based materialsurfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 40 | Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. |
| 41 | M&L for Seamless calcium silicate ceiling 12mm thickmade out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) |
| 42 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 43 | Demolition of precast block walling built in cement mortor complete all specified and directed |
| 44 | M&L PCC 1:3:6 type C1 as in block masonry with solid blocks exc 10 cm in width and set in CM 1:6. complete all specified and directed. |
| 45 | M&L rendering 15mm thick in CM 1:4on concrete outer surfaces finished even and smooth without using extra cement . |
| 46 | Dismantling of floor, hearth or wall tiling including cement mortar bedding |
| 47 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles . |
| 48 | M & L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. |
| 49 | Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 50 | Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces in external painting with WPC. |
| 51 | M&L for Preparing newly plastered surfaces and applying two coats of cement base paint on walls. |
| 52 | Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth W/O using extra cement. |
| 53 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. |
| 54 | M&L for Preparation of old painted surfaces of walls and applying 2 coats of synthetic enamel paint over a coat of priming caot on plastered surfaces |
| 55 | M&L for Preparing newly plastered surfaces of ceiling andapplying three coat of whitewash.. |
| 56 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 57 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/densesoil. |
| 58 | M&L for Hardcore of Broken stone or boulders guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface |
| 59 | M&L for 100 mm thick PCC 1:4:8 type D-2, (using 40 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement all as specified |
| 60 | Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM1:6. |
| 61 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments. |
| 62 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 63 | All as per item No. 62 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 64 | All as per item No. 62 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specifieddirected. |
| 65 | All as per item No. 62 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 66 | S&FSocket outlet 2 in 1, 5 pin, 5amp flush type |
| 67 | S&FSocket outlet 2 in 1, 5 pin, 5 and 15 amp flush type |
| 68 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 69 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals complete all as specified & directed. |
| 70 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 71 | Supply and fixing lamp holder, insulatted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. |
| 72 | S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). Make- Havells/Crompton/Syska |
| 73 | M&L for high performance LED flood light fitting of 200 watts power consumption complete,IP 66 input voltage range of 150-240 volts (nominal rated voltage -240 volts) complete all as specified and directed |
| 74 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 75 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbarsingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 76 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 Vcomplete all as specified and directed. |
| 77 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 Vcomplete all as specified and directed. |
| 78 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 79 | S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections etc |
| 80 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 81 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 82 | Taking downsub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. |
AI Tender Summary
Tender Timeline
Jun 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender