Tender For Repair Of Road Surface And Footpath By Providing Bituminious Works And Paver Block (Zone -D, Ap, Aq, Bp,Cp And Dp Block) At Sector-V, Under Ndita
Tender Value
57.17 Lakhs
Estimated cost
Bid Submission
08 Jul 2024
0 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ndita → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Road Surface And Footpath By Providing Bituminious Works And Paver Block (Zone -D, Ap, Aq, Bp,Cp And Dp Block) At Sector-V, Under Ndita
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(i) On Bituminous Surface(Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg per sqm.) |
| 2 | Repairing pot holes and making up small depressions with remming or power rolling including screening,cleaning chips or metals and washing,drying as necessary and heating the chips or metals where necessary,cutting pot holes to regular shapes with vertical edges,cleaning the disintegrated materials,heating matrix and applying tack coat (including sides).finishing the top of repairedsurface levelled with adjoining area,including cost and carriage of stone aggregates and matrix,excluding cost of applying tack coat.[Tack coat isto be considered separately] With premixed Chips or Bajrees with 54 kg of bitumen per m3 of loose net volume of stone chips using concrete mixer machine.{The payment is to be made on the basis of loose net volume of stone materials consumed in the work.)Using Mobile HMP( Light Duty) |
| 3 | Providing and laying bituminous macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature by means of approved and suitable arrangements to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Specifications for Road &Bridge Works of MoRT&H (5th Revision). (a)For Grading 2(19 mm nominal size, 50-75 mm thick.) |
| 4 | Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreadingthe mix at an uniform rate using suitable means,brushing the surface, if necessary, to ensure uniformity, followed by rolling with power rollerincluding the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost offuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).I By Mechanical Means(i) With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) |
| 5 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 6 | Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade& camber and rolling the sub-grade with power rollerto proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.(a) Depth up to 150 mm. |
| 7 | (b) For each additional Depth of 150mm and partthereof. |
| 8 | Mix in place Method: Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). |
| 9 | 100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course& 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.[Note: Subgrade CBR shouldnot be less than 5]Grey |
| 10 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 11 | Taking out carefully Paver blocks from old footpath and stacking properly at suitable nearer site etc. all complete. |
| 12 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 13 | Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)B) Do - by fine sand |
| 14 | Relaying& resetting interlocking Paver Block 60mm thick of any shade and approval quality over 75mm thick medium and as per IS 1237-1980 laid in pattern as directed in pavement, footpath, drive wat etc. including necessary underlay complete in all respect with all labour and materials( Border concrete if necessary to be paid seperately). |
| 15 | 60 mm thick interlocking designer concrete paver block M-35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) |
| 16 | Supplying, fitting and fixing in position reinforced cement polymer concrete manhole / gully pit cover with matching frame as per I.S. 12592 (M.D.)i) 15 MT load bearing capacity gully pit cover with frame and hingearrangement for opening of size Each 3465.00Cover : 565 mm. X 410 mm. X 90 mm.Frame : 715 mm. X 565 mm. X 185 mm.Weight : 140 Kg. (approx.) |
| 17 | Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D)(i) 35 MT load bearing capacity round manhole cover provided with twolifter hooks fitted with matching frame of sizeCover: 700 mm X 100 mmFrame: 910 mm X 185 mmopening: 560mmWeight: 245 kg (approx) |
| 18 | Add GST@18% on Sl. No. 1 to 16 |
| 19 | Add labour cess @1% on Sl. No. 1 to 17 |
AI Tender Summary
Tender Timeline
Jun 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 10, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender