|
| 1 | Schedule\"A\" Part-I: B&R works |
| 2 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 3 | Taking down shutter from the frame exe 1.00 Sqm and n exc 2.0 Sqm each complete all as specified and directed. |
| 4 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed. |
| 5 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified and directed. |
| 6 | S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 7 | S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified |
| 8 | S&F Factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed. |
| 9 | Supply & Fix18/19 mm thick exterior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work for Cupboard shutter complete specified. |
| 10 | Supply & Fix12 mm thick exterior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work for Cupboard shutter complete all as specified. |
| 11 | Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening all as specified and as directed. |
| 12 | M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed. |
| 13 | M & L for PCC type C-1 (1:3:6) using 20mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frameincl necessary form work complete all as specified. |
| 14 | S &F in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete as specified |
| 15 | Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each complete all as specified |
| 16 | S & FFactory made solidPVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing complete all as specified. |
| 17 | S&F factory made Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified . |
| 18 | S&F 100mm size type B-21 Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized complete all as specified. |
| 19 | S&F 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed. |
| 20 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified . |
| 21 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 22 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified . |
| 23 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified |
| 24 | Supply & Fix 100 mm aluminium anodised Hasp and staple, safety type,including bolt to hinge plate fixed with screws |
| 25 | S&F in repair 150mm long aluminium anodized barrel tower bolts of extruded section. |
| 26 | S&F in repair 150mm size extruded aluminium alloy handles, fabricated type anodized. |
| 27 | S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 28 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 29 | S&F factory made Z sectionsteel windowwith side hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg stay, ms tower bolt etc. completewith glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 30 | S&F factory made Z sectionsteel window with side hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg stay, ms tower bolt etc. completewithout glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 31 | S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 4.0mm thick plain/tinted glass and SS wire mesh and making good the surface complete all as specified . |
| 32 | S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 4.0mm thick Frosted tinted glass fixed in panels with suitable locking arrangementsand making good the surface complete all as specified . |
| 33 | M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed. |
| 34 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 35 | M&Lfor applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified |
| 36 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 37 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 38 | S&F3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each complete all as specified and directed. |
| 39 | S&Ffigured glass, pin head type 4 mm thick in squares n.exc 0.50 Sqm in each pane etc complete all as specified and directed. |
| 40 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 41 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 42 | Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed. |
| 43 | M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified. |
| 44 | M&L 10 mm thick renderingin CM (1:6) on other than fair faces of brick work or concrete surfaces without using extra cement complete all as specified |
| 45 | M & L for preparation of new plastered surfaces and applyingtwo coats of cement base paint over newplastered surfaces complete all as specified and as directed |
| 46 | M & L for preparation of new plastered surfaces and applyingtwo coats of oil bound distemeron newplastered surfaces complete all as specified. |
| 47 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2.Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule \"A\" notes for details. |
