|
| 1 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 2 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for Brick work in half brick thick wall with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) as inchajja and the like incl necessary form work complete all as specified and directed. |
| 6 | M&L TMT 8mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming Fe- 500, complete all as specified and directed. |
| 7 | M & L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, / padding and the like including weathering, slightly rounded or chamfered angles with & inclnecessary use and waste of form work for fair faces of concrete, complete all as specified and directed. |
| 8 | Supply only integral water proofing compound powder conforming to IS specification, complete all as specified and directed. |
| 9 | Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down). |
| 12 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down). |
| 13 | S&F 15 mm bore tubes, \"medium grade\", galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified. |
| 14 | S&F 20 mm bore tubes, \"medium grade\", galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified. |
| 15 | Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete |
| 16 | Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete |
| 17 | Supply and fix in repair 2000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete |
| 18 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, suitable for 20 mm bore pipe, screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 19 | Disconnecting existing tank of capacity 500 ltrs, setting aside or lowering if required and reconnecting or refixing in same positing or other position,including cleaningand removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc complete all as specified . |
| 20 | Disconnecting existing tank of capacity 1000 ltrs, setting aside or lowering if required and reconnecting or refixing in same positing or other position,including cleaningand removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc complete all as specified . |
| 21 | Disconnecting existing tank of capacity 2000 ltrs, setting aside or lowering if required and reconnecting or refixing in same positing or other position,including cleaningand removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc complete all as specified . |
| 22 | S&F in repairs 15 mm size Bib taps, cast iron with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 23 | S&F in repairs 15 mm size PTMT( Polytetra Methyllene Terephthalate) Bib taps suitable for 15 mm bore pipestandard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified and directed. |
| 24 | S&F in repairs 15 mm size bib tap, with wall glange, long body, cast copper alloy chromium plated, fancy type with capston head, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified. |
| 25 | S&F in repairs 15 mm size long body bib tap, with wall glange, long body, cast copper alloy chromium plated, fancy type with capston head, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified. |
| 26 | S&F in repairs 15 mm size long body elbow operated bib tap, with wall glange, long body, cast copper alloy chromium plated, fancy type with capston head, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified. |
| 27 | S&F in repair 15 mm size Concealed stop cock, cast copper alloy, chromium plated, Reduced body ISI Marked, screwed down, high pressure, with capston head, screwed externally both ends for unions etc. and fixed complete all as specified. |
| 28 | S&F in repair 15 mm size Angle cock / valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes complete. |
| 29 | S&F in repair 15 mm size two way Angle cock / valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes complete. |
| 30 | S&F in repair 15 mm size two way stop cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete. |
| 31 | S&Fin repair 15 mm size pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F in repairs 15 mm size swan neckpillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 33 | S&Fin repair 15 mm size elbow operated pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F in repair for censor type auto operated swan neck pillar tap, cast copper alloy, chromium plated, fancy type with complete accessories and electrical fittings including removal of existing unservicable tap complete all as specified and directed. |
| 35 | S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 36 | S & F in repairs 15 mm size wall mixer with provision for hand shower for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair 15 mm size basin mixer cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe with 450 mm braided connection pipe complete all as specified. |
| 38 | S&F in repairsBrass chromium plated shower rose 80 mm size without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 39 | S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets,Complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F in repair for brass chromium plated toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 42 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 43 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 44 | S&F in repairs 5 mm thick of size 600 mm x 450 mm bevelled edge mirror of selected quality glass, fixedto wall with stainless steel Bolt flat head mirror screw (minimum 4 Nos per piece) with spacers complete all as specified and directed. |
| 45 | S&F in repairs 600 mm x 450 mm bevelled edge mirror 5.5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified and directed. |
| 46 | S&F in repairs 6 mm thick bevelled edge mirror of selected quality glass, fixedto wall with stainless steel Bolt flat head mirror screw (minimum 4 Nos per piece) with spacerscomplete all as specified and directed. |
| 47 | S&F in repairs CP mild steel gratings suitable for 75 / 100 mm dia forNT/ FT complete all as specified and directed. |
| 48 | S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe), complete all as specified and directed. |
| 49 | S&F in repair brass Chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified. |
| 50 | S&F in repair white vitreous China wash down water closet pan (padestal pattern), fixed in position with fixing bolts,connection to drain pipe and to flushing pipe, etc., complete. |
| 51 | Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.. |
| 52 | S&F in repair PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and makingconnection complete complete all as specified. |
| 53 | Supply and fixing in repairsPlastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 54 | S & F in repair white vitreous china floor mounted coupled EWC of size 380 mm x 725 mm x 690 mm including UF soft close slim seat cover, hinges, fixing accessories, accessories set and Cistern Fittings complete all as specified and directed. Make of Cistern & EWC: Jaquar model No- ONS-WHT-10853S300UFSM or equivalent cat No of make mention in list of manufacturer. |
| 55 | S&F in repair PVC connection 15 mm size with PTMT nut, length 450 mm complete all as specified and directed. |
| 56 | S&F in repair PVC connection 15 mm size with PTMT nut, length 600 mm complete all as specified and directed. |
| 57 | S&F in repair white vitreous China bowl urinal flat back, of size465 x 355 x 265 mm ( minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe, and waste pipe) including connections to flushing pipe and outgoing, complete all as specified and directed. |
| 58 | S&F in repair white vitreous Chinaurinal flat back, half stall (Large size) with grating and union for discharge pipe (excluding flushing cistern, flush pipe, and waste pipe, fixed in repairs including connections to flushing pipe and outgoing, complete all as specified and directed. |
| 59 | Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete, 32 mm size brass chromium plated waste coupling, complete. |
| 60 | S&F 32 mm size flexible pipe of PVCfixed to WHB / urinals as waste pipe (not less than 600mm long) including PVC coupling complete all as specified and directed. |
| 61 | S&F in repair 32 mm size flexible pipe of PVCfixed to WHB / urinals as waste pipe (not less than 600mm long) including PVC coupling complete all as specified and directed. |
| 62 | S&F in repair 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 63 | S & F in repair 15 mm size gun metal gate valves ISI marked with iron wheel head screwed both ends for iron pipe and fixed. |
| 64 | S & F in repair 20 mm size gun metal gate valves ISI marked with iron wheel head screwed both ends for iron pipe and fixed. |
| 65 | M&L for taking down glass / ACP panel & neosprene rubber beading from aluminium joinery & supply & fix new neosprene rubber beading with old glass / ACP panel completeall as specified & directed. |
| 66 | S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass. |
| 67 | M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioningcomplete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ. |
| 68 | M&L for Repairing of existing toughened glass door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioningcomplete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ. |
| 69 | Supply & fix in repair Double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box, main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed, complete all as specified and directed. |
| 70 | S&F in repairs Aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters 701 to 850 mm in width and ofweight between 36 to 60 Kg and fixed, complete all as specified and directed. |
| 71 | S&F in repair 100 mm size mild steel mortice lock,for aluminium door, with 4 brass levers and duplicate key complete all as specified and directed by Engineer-in-Charge |
| 72 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries from site. |
| 73 | M&L for non skid ceramictiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed in CM 1:6, complete all as specified and directed. |
| 74 | M&L for glazed ceramic tiles in vertical surfaces 300 mm x 450 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10 mm thick screed in CM 1:3, complete all as specified and directed. |
| 75 | M&L for vitrified ceramic tiles 10 mm thick (square / rectangular) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 76 | M&L for glazed cerimic elevetion tiles with convex surface, of size 75 mm x 150 mm x 6 mm thickness at edge and 10 mm thick at center as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. |
| 77 | M&L 18-20 mm thick machine cut Kota stone slab flooring with marble stone strips as per design approved, laid over and including cement screed bed 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed. |
| 78 | M&L for 18-20 mm thick machine cut Kota stone slab as in skirting / riser laid over and including cement screed bed 10 mm thick in CM 1:3and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed. |
| 79 | Deployment of man power & floor grinding machine for grinding and polishing of existingKota stone / terrazzo tiles flooring, polished up to mirror finish complete all as specified and directed |
| 80 | M&L for 18 to 20 mm thick granite (of any type) tiles machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 15 mm thick in cement mortor 1:4 complete all as specified and directed.Note : Quoted rate shall be deemed to include cast of screed bed. |
| 81 | Material and labour 1st quality vitrified outdoor, parking tiles of approved shade, of size 300 mm x 300 mm x 10 mm thick as in floors / path etc, set &jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 82 | M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 20 mm thick, with gray cement and pigment set & jointed with gray cement slurry and pointed with gray cement & pigment laid over and including 20 mm thick screed bed in CM 1:4 as in floors complete all as specified.Note : Quoted rate shall be deemed to include cast of screed bed. |
| 83 | M&L for 75 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate,as in Sub base / path / flooring complete all as specified and as directed. |
| 84 | M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed including dismantling and removal of existing paver blocks, complete all as specified and directed. |
| 85 | M&L for Hardcore of gauge n exc. 63 mm, of broken bricks, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 86 | M&L for precast cement concrete Type B0,1:2:4 (using 12.5mm graded stone aggregates) louvres and jallies, 25 mm thick (measured solid), including all mouldings and set in CM 1:4 complete all as specified and directed. |
| 87 | M&L forSuper heavy series PVC Wall panelling consisting of 5 mm thick (hollow) Plain / wood colour PVC sheet as approved including complete fixing arrangments on wall / ceiling of including dismantling of unserviceable existing wall panelling complete all as per manufactures specifications, complete all as specified and directed.. Make:- Polywood or equivalent of other make approved by GE. |
| 88 | S&F in repair for 20 mm dia curtain rails with bracketsand end cap each sides inwindow / doors, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. (Note :- Each rail will be measured) |
| 89 | S&F in repair 20 mm dia fancy type drapery curtain rod made of mild steel duly PVC sleeved complete all as specified and directed. |
| 90 | S&F Powder coated brackets for fixing curtain rod of any dia and fixed complete all as specified and directed. |
| 91 | S&F Powder coated decorative any shape end cap for fixing with curtain rod of any dia and fixed complete all as specified and directed. |
| 92 | S&F in repair for PVC venetian blinds of selected quality and shade alongwith complete fixing arrangements complete all as specified and directed. |
| 93 | Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 94 | M&L for 15 mm thick renderingin CM (1:3) on sunken portion of toilet including mixing only liquid water proofing compound as per manufacturers instruction, finished the surface even and smooth without using extra cement complete.Note:- Liquid water proofing compound will be measured & paid separately. |
| 95 | M&L for Rendering 10 mm thick in cement and sand mortar 1:6 onbrick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cementcomplete all as specified. |
| 96 | M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified and directed. |
| 97 | M&L for preparing surfaces, plastered orunplastered new surfaces of ceiling and applying three coats white wash complete all as specified and directed. |
| 98 | M&L for Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of primer all as specified on walls surface. Incl a coat of 2 mm thick wall care putty, complete all as specified and directed. |
| 99 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint of any tint / shade over a coat of primer complete all as specified and directed. |
| 100 | M&L applying two coats exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over newly plastered surface including preparation ofwall surface over and including 1 mm thick wall care putty & primer complete all as specified and directed. |
| 101 | M&L for Preparation of new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 102 | M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 103 | M&L for Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 104 | M&L for Complete removal of exixting treatment on wall and applying two coats exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac)over one coat of primer & over 1 mm thick wall care putty complete all as specified and directed. |
| 105 | M&L for Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint / shade complete all as specified and directed. |
| 106 | M&L for Preparation of old painted surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint / shade complete all as specified and directed. |
| 107 | M&L for Preparation of old painted surfaces of ceiling by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint / shade complete all as specified and directed. |
| 108 | M&L for Complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a coat of cement base wall care putty average thickness 2 mm and primer including prepration complete all as specified and directed. |
| 109 | Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 110 | M&L for providing cement concrete type B-1,1:2:4 (20 mm graded aggregate ) asin floor, kerbs padding or similar work or mud stops rounded or chamferred on edges, complete all as specified and directed. |
| 111 | M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection / path and the like complete all as specified and directed. |
| 112 | M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3, complete all as specified and directed. |
| 113 | Demolition of existing roof treatment of any type, including screed bed etc complete all as specified and directed. |
| 114 | M&L for 15 mm thick screed bed in cement mortar 1:4 over RCC roof slab including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid separately) |
| 115 | Supply only Liquid water proofing compound |
| 116 | M&L for water proofing treatment on roof surfaces in the following manner:-(a)The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg / sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm.(b) Supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyester matt laid using bitumen torch by torch application with a side lap of 10 cm & 15 cm end lap weighing not less than 3.5 kg / sqm. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs(ii) Contractor shall submit written guarantee of 10 years from date of completion & submit security deposit @ 2.5% of executed amount or Rs 6250.00 which ever is more. |
| 117 | M&L for preparation of untreated surface of APP membrane of any description over 10 cm in width or girth, not otherwise described and applying two coat of aluminium paints over one coat primer complete all as specified and directed. |
| 118 | M&L for 75 mm thickPCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified and as directed by Engineer-in-Charge. |
| 119 | M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed including dismantling and removal of existing paver blocks, complete all as specified and directed. |
| 120 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 121 | S&F rolled mild steel section as inmain and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A). |
| 122 | Dismantling of roof sheet (any descriptions) including ridges in roof covering complete all as specified and directed. |
| 123 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 124 | Deployment of manpower, tools & machinery etc for temporarily blocking of inlet of septic tanks / manhole etc, depth exc 0.50 metre but not exc 1.5 metre from ground level, with suitable wooden plugs / gunny bags and pumping / bailing out effluent and taking out / removing the accumulated sludge soil sewage / any other foreign / foul materials etc (solid / semisolid) from the septic tanks / manholes complete and cleaning the septic tank / manholes with fresh water by mechanically spray machine including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. Note:- (i) Size of tank up to water level shall be measured. |
| 125 | Deployment of manpower, tools & machinery etc for temporarily blocking of inlet of septic tanks / manhole etc, depth exc 1.50 metre but not exc 4.5 metre from ground level, with suitable wooden plugs / gunny bags and pumping / bailing out effluent and taking out / removing the accumulated sludge soil sewage / any other foreign / foul materials etc (solid / semisolid) from the septic tanks / manholes complete and cleaning the septic tank / manholes with fresh water by mechanically spray machine including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. Note:- (i) Size of tank up to water level shall be measured. |
| 126 | Deployment of manpower, tools & machinery etc for temporarily blocking of 150 mm bore sewage line with suitable wooden plugs / gunny bags and cleaning the same by rodding and removing the sludge along with brick bats / stones / broken bottles / any other foreign materials etc complete and cleaning the sewage line with fresh water by mechanically spray machine all as directed by EIC and taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. |
| 127 | All as per item No 126 above but 200 mm bore sewage line |
| 128 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil, complete all as specified and directed. |
| 129 | Demolition and breaking up 150 mm dia bore sewage / drain pipe / RCC hume pipe including PCC packing under haunching against the sides of pipe bed and complete PCC of bed all specified and directed. |
| 130 | M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed. |
| 131 | M&L for PCC 1:3:6, type C2 using 40mm graded stone aggregate as inbed to drain pipes of 150 mmbore dia including packing uner , and haunching against the sides of pipes after they are laid and tested in, complete all as specified and directed. |
| 132 | Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick using soft / loose soil complete all as specified and directed. |
| 133 | Removing excavated soils not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 134 | M&L for cutting & removing 150 mm dia drain pipe from existing manhole and inserting new drain pipe of dia 150 mm, making good disturbed surface & benching with cement concrete 1:2:4 type B-1, complete all as specified & directed. (new drain pipe will be measured & paid separately. |
| 135 | S &F in repair for 75 mm outer dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors / fix to wall including taking down of existing unservicebale pipes, complete all as specified and directed. |
| 136 | S &F in repair for 110 mm outer dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors / fix to wall including taking down of existing unservicebale pipes, complete all as specified and directed. |
| 137 | S&F in repair for 110 mm outer dia PVC (SWR)vent cowl, complete all as specified and directed. |
| 138 | S&F 75 mm size PVC (SWR)bends any radius complete all as specified. |
| 139 | S&F 110 mm size PVC (SWR)bends any radius complete all as specified. |
| 140 | S & F in repair 75 mm size PVC (SWR)floor trapplain with grating including jointing with solvent cement, complete all as specified and directed. |
| 141 | S&F in repair 125 / 110 mm size PVC (SWR) gully trap with grating including jointing with solvent cement, complete all as specified and directed. |
| 142 | Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where complete all as specified and directed. |
| 143 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone) as in foundation and mass concrete, complete all as specified and directed. |
| 144 | Dismantlingchain link fencing fixed with steel or wood fillets, of any type complete all as specified. |
| 145 | M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 146 | S&F Mild steel screw bolts (machine made) of 10 mm dia of sank with hexagonal or squre head at one end & screw the other or screwed both end (as directed)each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long, complete all as specified and directed. |
| 147 | Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc.Note: (i) Supply only fencing, will be measured and paid separately.(ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately. |
| 148 | Supply only chain link fencing of galvanized steel wire of any dia / aparure as directed, made up into mattresses or cages lapped wired conforming to IS 2721 all as specified & directed.Note:-Fixing only fencing will be measured and paid separately. |
| 149 | S&F in repair for mild steel Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including dismantling of old wire complete all as specified and directed. (Note :- Each line wire to be measured) |
| 150 | M&L for Preparation of new steel and iron based surfaces of any description, not otherwise described over 10 cm width or girth, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 151 | Deployment of manpower & tools etc for Complete removal of existing treatment on wall / roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. (Rate included for necessary scaffolding and arrangement for working up to 15 mtrs height). |
| 152 | M&L for applying minimum 1 mm thick exterior grade wall care putty over prepared plastered wall surface to achieve the surface even and smooth for application of painting complete all as specified and directed. Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 153 | Material & Labour for applying two coats of 100% Premium acrylic emulsion paint, having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over on putty applied surfaces of walls, primer & paint shall be applied by air less spray machine (Mechanical means) complete all as specified & directedNote:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
