Public Administrative Department Local Bodies Closing in 0 days TDR #43826900

Tender For Supply And Delivery Of Light Commercial Vehicle(1No) In Irugur Town Panchayat.

Issued by Local Bodies · irugur, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jun 2024
0 days left
EMD
7750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
irugur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Supply And Delivery Of Light Commercial Vehicle(1No) In Irugur Town Panchayat.; Displacement (CC) / Engine Capacity-700 CC -1250 CC,Max Power-20- 30BHP @2500 rpm and above,Max Torque-500Nm@ 2000 rpm and above,Type of fuel-Diesel,Load Capacity-2 cu.rn,Vehicle emission Norms-BS -VI,No of cylinder in engine-2 — 4 cylinder,Length of chassis-3800 mm - 3950 mm,Width of chassis-1500 mm — 1550 mm.Ground clearance. 150 mm -165mm,Fuel tank capacity-Diesel-30Ltrs to 40 ltrs CNG- 12-25kg,Size of Tyre’s & No‘s-145 R 1 2 —5 N os.,Wheel base-1900 mm — 2250 mm,Gross vehicle weight-1550 kg1900 kg,Clutch-Single plate dry friction diaphragm,Transmission System-Manual,No of speed/forward gears-4 NosSpeeds(4F+ 1R),Type of Steering-Manual / Power,Speed Governors-Shall be Fitted,Pay Load-800 Kg to 1000Kg,Tipper body length-2100 mm-2200mm,Mlild steel,Tipper body Width-1400 mm - l500mm, Mild steel,Tipper body Height-750mm- 950 mm, Mild steel,Side portion (LH & RH)& rear doors Sheet thickness-2 mm, Mild steel,Tipper body topsheet including frame sheet thickness-1.6mm, Mild steel,Tipper Body Top Lid Sheet thickness-1.2mm,Mildsteel,Tipper Container-Tipper Containershouldbe Fabricated with two doors on the rear side and four doors on four top corners of the containerswith hinges and locking system.ApartitionshouId be provided onthe middIe of container along the verticallength of the body.,Tipper Body Top Lid main Sheet thickness-75 x 40 x 6 mm,Hydraulic cylinder make-ReputedMake,Hydraulicsystem driven-Main Engine,Pump Make-As per IS standard,Painting-Should be paintedwith one coat of Anti-corrosive epoxyprimer and two coats of enamelpaint for approved qualityto ensure long lasting resistance for weatherizing and breakage. The color shadeshould be as per norms.,Lettering-To be carried out as directed by Dept ofñcers,Tipper body rear door-Shall bewithnecessarylockingfacility .,Side safetyguard-Shall be provided as per RTO requirement,Additional conditions-Vehiclewith fuel sensor and GPS tracking.,WarrantyDistance/Year-25000KM//12 months whicheveris earlier.One Number of Light Commercial Vehicle 2 Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3. 3 All figures quoted should be inclusive of GST Charge

BOQ

Name of Work:Supply and delivery of Light Commercial Vehicle(1No)inIrugur Town Panchayat
Sl. No. Item Description
1Displacement (CC) / Engine Capacity-700 CC -1250 CC,Max Power-20- 30BHP @2500 rpm and above,Max Torque-500Nm@ 2000 rpm and above,Type of fuel-Diesel,Load Capacity-2 cu.rn,Vehicle emission Norms-BS -VI,No of cylinder in engine-2 — 4 cylinder,Length of chassis-3800 mm - 3950 mm,Width of chassis-1500 mm — 1550 mm.Ground clearance. 150 mm -165mm,Fuel tank capacity-Diesel-30Ltrs to 40 ltrs CNG- 12-25kg,Size of Tyre’s & No‘s-145 R 1 2 —5 N os.,Wheel base-1900 mm — 2250 mm,Gross vehicle weight-1550 kg1900 kg,Clutch-Single plate dry friction diaphragm,Transmission System-Manual,No of speed/forward gears-4 NosSpeeds(4F+ 1R),Type of Steering-Manual / Power,Speed Governors-Shall be Fitted,Pay Load-800 Kg to 1000Kg,Tipper body length-2100 mm-2200mm,Mlild steel,Tipper body Width-1400 mm - l500mm, Mild steel,Tipper body Height-750mm- 950 mm, Mild steel,Side portion (LH & RH)& rear doors Sheet thickness-2 mm, Mild steel,Tipper body topsheet including frame sheet thickness-1.6mm, Mild steel,Tipper Body Top Lid Sheet thickness-1.2mm,Mildsteel,Tipper Container-Tipper Containershouldbe Fabricated with two doors on the rear side and four doors on four top corners of the containerswith hinges and locking system.ApartitionshouId be provided onthe middIe of container along the verticallength of the body.,Tipper Body Top Lid main Sheet thickness-75 x 40 x 6 mm,Hydraulic cylinder make-ReputedMake,Hydraulicsystem driven-Main Engine,Pump Make-As per IS standard,Painting-Should be paintedwith one coat of Anti-corrosive epoxyprimer and two coats of enamelpaint for approved qualityto ensure long lasting resistance for weatherizing and breakage. The color shadeshould be as per norms.,Lettering-To be carried out as directed by Dept ofñcers,Tipper body rear door-Shall bewithnecessarylockingfacility .,Side safetyguard-Shall be provided as per RTO requirement,Additional conditions-Vehiclewith fuel sensor and GPS tracking.,WarrantyDistance/Year-25000KM//12 months whicheveris earlier.One Number of Light Commercial Vehicle
2Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
3All figures quoted should be inclusive of GST Charge

AI Tender Summary

OUR REF NO 43826900
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 27-06-2024
Authority
Authority Name Town Panchayats
Work Description Tender For Supply And Delivery Of Light Commercial Vehicle(1No) In Irugur Town Panchayat.; Displacement (CC) / Engine Capacity-700 CC -1250 CC,Max Power-20- 30BHP @2500 rpm and above,Max Torque-500Nm@ 2000 rpm and above,Type of fuel-Diesel,Load Capacity-2 cu.rn,Vehicle emission Norms-BS -VI,No of cylinder in engine-2 — 4 cylinder,Length of chassis-3800 mm - 3950 mm,Width of chassis-1500 mm — 1550 mm.Ground clearance. 150 mm -165mm,Fuel tank capacity-Diesel-30Ltrs to 40 ltrs CNG- 12-25kg,Size of Tyre’s & No‘s-145 R 1 2 —5 N os.,Wheel base-1900 mm — 2250 mm,Gross vehicle weight-1550 kg1900 kg,Clutch-Single plate dry friction diaphragm,Transmission System-Manual,No of speed/forward gears-4 NosSpeeds(4F+ 1R),Type of Steering-Manual / Power,Speed Governors-Shall be Fitted,Pay Load-800 Kg to 1000Kg,Tipper body length-2100 mm-2200mm,Mlild steel,Tipper body Width-1400 mm - l500mm, Mild steel,Tipper body Height-750mm- 950 mm, Mild steel,Side portion (LH & RH)& rear doors Sheet thickness-2 mm, Mild steel,Tipper body topsheet including frame sheet thickness-1.6mm, Mild steel,Tipper Body Top Lid Sheet thickness-1.2mm,Mildsteel,Tipper Container-Tipper Containershouldbe Fabricated with two doors on the rear side and four doors on four top corners of the containerswith hinges and locking system.ApartitionshouId be provided onthe middIe of container along the verticallength of the body.,Tipper Body Top Lid main Sheet thickness-75 x 40 x 6 mm,Hydraulic cylinder make-ReputedMake,Hydraulicsystem driven-Main Engine,Pump Make-As per IS standard,Painting-Should be paintedwith one coat of Anti-corrosive epoxyprimer and two coats of enamelpaint for approved qualityto ensure long lasting resistance for weatherizing and breakage. The color shadeshould be as per norms.,Lettering-To be carried out as directed by Dept ofñcers,Tipper body rear door-Shall bewithnecessarylockingfacility .,Side safetyguard-Shall be provided as per RTO requirement,Additional conditions-Vehiclewith fuel sensor and GPS tracking.,WarrantyDistance/Year-25000KM//12 months whicheveris earlier.One Number of Light Commercial Vehicle 2 Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3. 3 All figures quoted should be inclusive of GST Charge
Basic Detail
Tender No 469/2024-2
Bidding Type Tender
Location
City irugur
State Tamil Nadu
Key Dates
Publish Date 22 Jun 2024
Submission Date 27 Jun 2024
Open Date 27 Jun 2024
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 7750
Exemption Not Available
Document List
BOQ_543145.xls
a2a3da0d-beaf-4209-a67a-6d67274f8434.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 22, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 27, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 27, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_543145.xls

html

a2a3da0d-beaf-4209-a67a-6d67274f8434.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders