Tender For Restoration Of Different M.I Schemes Under Bagafa Block Under Water Resource Sub-Division, Santirbazar, South Tripura District During The Year 2024-25/Restoration Of Pump Motor And Electrical Equipments Etc. With Allied Works.

Sharing tender

Restoration Of Different M.I Schemes Under Bagafa Block Under Water Resource Sub-Division, Santirbazar, South Tripura District During The Year 2024-25/Restoration Of Pump Motor And Electrical Equipments Etc. With Allied Works.-- 1 Repairing of OSCO Starter including supplying and fixing of necessary spare parts as per direction of Engineer - in - Charge 2 Starter finger 3 Gola finger 4 CT coil 5 Magnet Coil 6 Circuit board for OSCO starter of Backlite make 7 SUPPLYING AND FITTING FIXING KIT CUT FOR MAIN AND SUB MAIN SWITCHAS PER DIRECTION OF THE Enginer -in charge. 8 a) 63 amps 9 b) 200 amps 10 Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with sheet primer(tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting ,backfilling complete as per direction of Engineer-in-charge. 11 providing and fixing 200 amps busbar of size 600x450x100 mm with 4 nos copper strip of size 450x4x4 mm of approved quality 12 providing and fixing 200 amps busbar of size 600x450x100 mm with 4 nos copper strip of size 450x4x4 mm of approved quality 13 Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design. 14 Providing & fitting fixing PVC suction hose pipe overall thickness 6mm of best quality at site of work (Pankaj made) of approved quality.150 mm dia 15 providing and fitting fixing M.S Clamp for hose pipeswithnuts and bolts compplete as per relevant IS Specification anddirection of the Engineer -in charge.150 mm dia 16 Supplying & fitting fixing manually operated oil immerged starter of approved qualitya) 30 Hp Osco/ BCH Make 17 PROVIDING AND FIXING g.i NIPPLE OF MEDIUM CLASS AS PER CPWD PECIFICATION AND DIRECTION OF THE ENGINEER -IN CHARGE.15 MM DIA TO 75 MM LONG 18 PROVIDING AND FIXING G.IbrassFULL WAY VALVE AS PER CPWD SPECIFICATON AND DIRECTION OF THE ENGINEER -IN - CHARGE.p. 40 mm dia fullway valve 19 Providing and fixing chlorinated polyvinyl chloride(cpvc) pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings this includes jointing of pipes and fittings with one step cpvc solvent cement trenching refilling and testing of joints complete as per direction of engineer -in - charge.40 mm nominal outer dia pipes 20 Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge.External work40 mm dia. nominal bore 21 Providing & fitting, fixing of the following electrical equipmentof approved quality as per direction of Engg - in - Charge. 22 a. Current range 200 Amps 23 b. Current range 63 Amps 24 c. AC Ammeter SMI-144, Range 0-10A 25 d. AC Voltmeter SMI-144, Range 0-400 to 0-500 26 e.200 Amps kitcut 27 f. 63 Amps kitcut 28 g. 7/16 copper wire (ISI marked) 29 i.Magnet coil (30 HP starter) 30 j.Starter finger 31 Providing & fitting fixing of following equipment of approved quality as per direction of Engg - in - Charge. 32 a. 150 mm dia G.I bend 33 b. 125 mm dia. G.I bend 34 c. 150 mm dia MS Flange (10 mm thick) 35 d. 125 mm dia. MS flange (10mm thick). 36 i. 150 mm dia C.I. foot valve of approved quality 37 Providing and fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality. 38 C.I foot valve weight 39 C.I foot valve ring 40 C.I foot valve net 41 Providing and fitting fixing C.I foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality. 42 m. 150 mm dia foot valve washer 43 m. 125 mm dia foot valve washer 44 Providing and fitting fixing C.I Tail piece of approved quality at site of work. 45 150 mm dia 46 Providing and fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. 47 e. 150mm dia. Flange washer(rubber) 48 f. 125 mm dia rubber flange washer 49 Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. 50 a. 190 mmf 51 b. 225 mmf 52 providing and fitting fixing coupling nuts and bollts(all size) of approved quality. 53 Providing & fitting fixing sleeve bush /long bush of variouspumpsets of approved quality As per direction of Engg.- In - Charge 54 a. Mather & plant 55 b. Joyti 56 c. Kiloskar 57 Providing & fitting fixing C.I. gland of approved quality. 58 Providing and fitting fixing coupling rubber bush(all size) of approved quality. 59 Providing & fitting fixing coupling star bush (All Size) of approved quality. 60 150 mm dia 61 190 mm dia 62 225 mm dia 63 Dismentalling ofmotor for vernishing, heating etc. complete in/c reinstallation and trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge 64 upply & fitting fixing ball bearing of approved quality for pump required during overhauling. 65 i) 6310 Ball bearing (TATA /SKF) 66 ii) 6309 Ball bearing (TATA /SKF) 67 iii) 6306 Ball bearing (TATA /SKF) 68 iv) 6305 Ball bearing (TATA /SKF) 69 v) 6206 Ball bearing (TATA /SKF) 70 Dismantling of horizontal pump and motor of 20/25 HP from the base and carrying the pump setb to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineer - in - charge. 71 Suppliying and fitting fixing of asbestos rope of best quality as per direction of Engineer - in charge 72 Supplying and greasing/applying of grease of approved quality as per direction of Engineer -in - charge. 73 Supplying and fitting fixing of pump cooling pipe of best quality as per direction of Engineer -in - charge 74 Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineerin-Charge. 75 Providing & fitting fixing Pump Shaftsleeve bush of approved quality.For LI 76 CI 77 STAINLESS STEEL 78 PROVIDING AND FITTING FIXING SHAFT SLEEVE NUT OF APPROVED QUALITY. 79 PROVIDING AND FITTING FIXING gland nut/stag nut 100 mm long for gland of approved quality. 80 Providing & fitting fixing Pump Shaft of approved quality. 81 Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump 82 Supplying following tools for day to day maintenance of pump sets and other accessories of TAPARIA make (Hammer 500grm.Sly Wrench big size,cutting plier,screw driver,dal wrench 14x15,16x17,18x19,20x21) 83 Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.Size 1.80X1.20X0.025 mtr 84 Labour charge for removal of deposited silt clay etc. from pump house & cleaning by water jetting or any suitable method as per direction of Engg-In-Charge. 85 Labour charge for cleaning of clay,silt etc.washing of all electrical equipment of panel board by petrolor any suitable method as per direction of Engg-In-Charge. 86 Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work. 87 125 mm dia nominal bore 88 150 mm dia nomonal bore 89 Providing and filling of Transformer Oil of approved quality into well immersed star delta starter of as per direction of the Engg-In-Charge.