Tender For Necessary Electrical Work Headquater Building Dlb Office And Other Offices, jaipur-Rajasthan

Nacessary Electrical Work Headquater Building Dlb Office And Other Offices , (72.18)( Providing, Fixing, Jointing, Testing & Commissioning Of Medium Duty Ms B Class Pipes Conforming To Is 3589 / 1239 Part-I For Dg Exhaust Applications (Beyond 1.5 Mtr. Length) Including Cutting, Welding Etc & Fittings Like Elbows,Flanges, Tapers, Reducer, Gaskets Etc. Fixing The Pipe On The Wall/Ceiling With Suitable Clamps, Hanger And Nuts Bolts . Including The Cost Of Thermal Insulation With 50 Mm Thick Layers Of Lrb Rock Wool As Per Is : 8183-1993 (64 Kg/M3 Density) & 26 Swg Aluminium Sheet Claddings Etc Complete As Required Complete In All Respect. (Cost Of Steel Structure For Exhaust Pipe Will Be Paid Extra). All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . , (72.18.6)( 250 Mm Dia. , (72.19)( Supply, Installation And Testing Of Metal Flexible Coupling (Below) Of Following Dia Required For Horizontal Length More Than 3 Mtr.As Per Standard Of Guide Line Of D.G. Set Company Complete In All Respect. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . , (72.19.6)( 250 Mm Dia. , (72.2)( Supply & Fabrication Steel Structure With Ms Channel / Angle / Joist / Ismb / Sheet Etc. Including Welding, Rivetting, Cutting, Nut & Bolt , One Coat Of Primer & Two Coat Of Enamel Paint Etc. As Required Complete In All Respect. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . , (72.21)( Earth Work In Excavation/ By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5M In Width As Well As 10 Sum On Plan) Including Disposal Of Excavated Earth, Lead Upto 50 M And Lift Upto 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed: , (72.22)( Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With Cement Mortar 1:6 ( 1-Cement : 6-Sand). , (72.24)( Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level , (72.24.1)( 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , (31.5)( Supply & Installation Of Precoated Galvanized Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm +/- 5% Total Coated Thickness (Tct), Zinc Coating 120Gsm As Per Is: 277 In 240Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches While Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55Mm) With Epdm Seal Or With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.

INR 500 /-

INR 19755.0 /-

INR 9.87 Lakhs /-