Tender For Construction Of Balance Work In Lab Weight And Measurement At Tilhar, Shahjahanpur, Construction Of Lab Of Weight & Measurment Tilhar, Shahjahanpur, 40 Mm Thick P.C.C Flooring With 1:2:4 Mortar (1Cement:2 C/S:4Sg) Concrete With 4Cm Gauge Stone, shahjahanpur-Uttar Pradesh

Tender For Construction Of Balance Work In Lab Weight And Measurement At Tilhar, Shahjahanpur, Construction of Lab of Weight & Measurment Tilhar, shahjahanpur, 40 mm thick P.C.C Flooring with 1:2:4 mortar (1Cement:2 c/s:4Sg) Concrete with 4cm gauge Stone ballast, C/sand and cement in proportion of 1:4:8 in foundation including supply of all material labour and T&P etc. required for proper completion of the work 40 mm thick P.C.C Flooring with 1:2:4 mortar (1Cement:2 c/s:4Sg) S/F of Glass Strips in 22X5 mm size S/F of Glass Strips in 35X5 mm size S/F of 4 mm thick glass pans with putty & pins 15 mm thick 1:4 cement C/sand plaster on fiar face of 19 thick wall all material labour T&P etc. Painting with two coats Enamel paint on Steel & wooden surface over one coat red oxide primer Distempering (first coat) with oil bound distemper of approved brand and manufacture and required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved Finishing walls with putty approved brand of required shade on undecorated surface including cost of all materials, labours, T&P etc. complete Painting with two coats with weather coats over one coat of cement primer including supply of all material labour T&P complete, internal sanitary & water supply work, Supply & Fixing of G.IL. Pipe 25mm dia Supply & Fixing of PVC water storage Tank Supply of 20mm dia Gate valve. Providing and fixing white vetreous chaina pedestal type water closet (European type W.C. pan) with seat and low level flushing cistern. Providing and fixing white vitreous chaina Wash basin 550x400mm with 15mm c.P. brass pillar top. Supply of C.P. Bib cock heavy Quality (Gem mikadeo/Encesss willams or eqy 15mm dia 400gms.) Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality, lab of science for weight & measurement building - Wiring point for light with 1.5 Sq.mm. FR PVC insulated multistrand single core Coper conductor cable (drawn through existing concealed PVC) and 5 Amp. Flush type switch & ceiling rose/angle/batten holder fixed with 3 mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. Wiring point for fan with 1.5 Sq.mm. FRLSH PVC insulated multistrand single core Copper conductor cable and 5 Amp. Flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. Wiring for Plug Paint in 1.5 Sq.mm. FR PVC insulated multistrand single core Coper conductor cable (drawn through existing concealed PVC) and 5 Amp Flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board boxjunction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. Wiring point call bell with 1.5 Sq.mm. PVC insulated single core coper conductor cable in PVC conduit with 1.5 Sqmm PVC insulated coper conductor/wire as earth wire drawn inside and piano type bell push or 2 pin socket etc. complete in all respects. Supply and wiring of submain with two number 4.0 Sqmm PVC insulated multistrand copper conductor cable in Existing PVC pipe with 2.50 sqmm PVC. Insulated single core copper conductor cable as earth drawn inside the conduit, complete in all respects. S/F of LED Tube light batten fitting suitable for up to 1 x 22 watt LED tube light on surface complete in all respect. Cat-AA Supply and fixing or recess/Surface/ Pendent mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink diffuser/Reflector and driver set complete in all respect. Cat-AA S/F of Water tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protection etc. complete in all respect. Supply and fixing of power plug with 15A/250V type switch and 5 pin 15A/250V flush type Universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with bakelite sheet cover 3mm thick fixed with brass maching screw and cup washer. complete in all respect. Supply and fixing of 25x3mm G.1. Strip from earth electrde directly in the ground, Supply and burring of Safe plate vartically for earthing with its top atleast 3mtr below ground level complete with 20mm bia G.I pipe and funnel for watering and earthing lead of No 8 to 10 SWG wire in G.I pipe upto switch board 30cm square chamber with hinged cover masonary housing alternate layers of charcoal and salt at least 150mm thick alround etc. S/F sheet Steel enclosure surface/flush mounting fitted with 20 Amp. 2 pin and earth metal clad scraping earth plug and socket Cat-B Supply and Fixing of 16 gauge M.S. drum duly painted including making hole in the wall for Ex-fan and finishing properly. Supply and fixing of Fire Extinguisher dry chemical type 4.0 kg capacity completer with initial charge and wall bracket along with supply of all materials and labour for proper complition of work. S&Fof 6 ways TPN distribution board with additional metal door without MCB complete in all respect Cat-B S&F of 6 Amp. to 32 Amp. MCB K.A/10 K.A C Curve Cat-B Supply and fixing of 63 Amp FPMCB (10 KA) C Curve Cat-B S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG M.S.sheet incorporating 10mm dia M.S.round bar duly painted with red oxide screwing arrangement with wiring condult laid in the RCC roof before concreting alongwith supply of all material labour T&P etc, for completion of work S/F of call bell of approved make on board including making connection etc. Supply and fixing of Change over switch 63 amp 4 pole on angle iron frame, including the cost of labour, T&P, painting and other required for proper completion of the work Supply and fixing of electronic fan regulator 120-280 V ISI marked, on the existing switch board including making connections. Supply and fixing of LED Street light fitting Having die cast aluminium body and difuser/refletor with driver set suitable for 45 to 50 watt. Confirming to IP 66 Protection complete in all respect. Cat-AA Wiring of Inverter Points Supply and fixing of LED Bulb 10 Watt. Approved make S/F of ceiling fan 1200mm. Bajaj Usha Make ISI Mark Complete in all respect S/F of Exhaust fan 12 Light duty Supply and fixing louver shutter Supply and fixing of Bakelite fan sheet. Supply and fixing of kit kat fuse 63 amp. on wooden board. Complete in all respect S/L of weather proof cable 16sqmm. X 4 core, Submersible Pump & Boring Complete, Supply and fixing of S/F of PVC pipe 110mm dia 181 6 kg per cm (weight of each pipe not less than 11.50 kg) HARYALI/KISSAN Make S/F of PVC Stainer 110mm ISI 6 kg per cm2 (weight of each pipe not less than 11.50 kg) HARYALI/KISSAN Make S/F of PVC socket 110mm dia 1S1 Heavy quality S/F of PVC End cap 110mm ISI Heavy quality S/F of M.S.Clamp 32 mm S/F of 2.50 Sqmm Submersible cable ISI S/F of 1.50 mm cable S.F. of Joint kit for Cable S/F of Solvent S/F of Submersible Pump 1 HP KSB Make water filled S/F of Stater Pannel for 1 HP Pump S/F of G.1. 32mm column pipe S/F of G.L. Socket 32 mm, 151 S/F of Plastic Dori Labour Charges Boring by 150mm dia casing pipe i/c lowering 110mm PVC pipe Fixing of Submersible pump | HP i/c connection main pipe line of water supply and satisfactory operation of submersible pump (Labour charge only) Testing of Boring Transportation Charge of Boring Set, Eartwork in excavation of foundation in ordinary soil including lift up to 1.5 m lead up to 30 including folling watering & ramming of excavated earth Base Concrete with 40 mm gauge stone ballast coarse sand and cement in the proportion of 1:4:8 foundation & under floors material labour T&P etc. R.C.C.work with cement coarse sand & 20 mm stone grit in the proportion of 1:1.5:3 complete supply of all material labour T&P etc. (Plinth Band) T.M.T.Steel work in rainforcement of R.C.C. Class-150 brick work in 1:6 cement & C/Sand in Plinth foundation supply of all material labour T&P complete. Class-150 brick work in 1:6 cement & C/Sand in Super Structure supply of all material labour T&P complete. 12 mm thick 1:6 cement coarse sand bearing plaster with neat cement finish all material labour T&P etc. Painting with two coats with weather coats over one coat of cement primer including supply of all material labour T&P complete Finishing walls with putty approved brand of required shade on undecorated surface including cost of all materials, labours, T&P etc. complete

INR 520 /-

INR 3.81 Lakhs /-