Tender For D/O Vill S Providing Street Lighting Work In Vill S Garhi Chaukhandi, Noida, 1 Supply And Fixing Of Factory Wired Integral Led Flood Light Luminaires With Die Cast Aluminium Housing Built With Dirver Set Suitable For 170 To 200 Watt. Confirmi, noida-Uttar Pradesh

Tender For D/O Vill S Providing Street Lighting Work In Vill S Garhi Chaukhandi, Noida, 1 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection. UPPWD-2018, PS-1455 CAT-AAA 2 Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specifiedsize and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted) DSR-2018, 11.5 3 Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mmthick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories forhigh mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor platesetccomplete in all respect as per direction of E/I. UPPWD-2018, PS-651 4 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Complete in all respect as per direction of E/I. UPPWD-2018 PS - 725B 5 S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects (P.S. No. 716) 6 S/L of Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(PS No. 501) UPSR -2018Make -Grandlay / Havells/Polycabea)- 16 sq. mm 4 core 7 b)- 16 sq. mm 2 core 8 c) 50 Sq.mm. 3.5 Core 9 S/F of Plain or Pin type copper tin plated cable socket (Lug)to the cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I (PS No. 504) UPSR-2018a)-16 sq. mm 10 Supply and fixing Following automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN,UPPWD-2018, PS-8071. 40 AMP SPN 11 2. 40 AMP TPN 12 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. E/I. UPPWD-2018 PS No. 1423 Catt-AAA 13 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR-18 (Elect.) Item No-14.16-a)-63 mm dia (OD-63 mm & ID-51 mm nominal) DSR-18 (Elect.) Item No-14.16.1 14 b)-90 mm dia (OD-90 mm & ID-76 mm nominal) DSR-18 (Elect.) Item No-14.16.2 15 Demolishing R.C.C. Work Manually by mechnical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of E/I. (AOR) 16 Supply of PCC pole 9 Mtr UPERC-2019 Page No-43 17 Supply & Fixing of XLPE Insulated Al. unarmoured Cable for working voltage for energizing the distribution boxes & Street light size of 1x16 sq.mm. complete in all respect as per direction of E/I. AOR 18 Supply & Fixing of XLPE Insulated Al. unarmoured Cable for working voltage for energizing the distribution boxes & Street light size of 1x25 sq.mm. complete in all respect as per direction of E/I. AOR 19 Supply & Laying of 1100 V grade Aerial Bunched Cable. Power Cable : Standed compacted circular aluminium conductor, XLPE insulated 1 Messenger conductor, Standed compacted..direction of E/I. AOR

INR 2832 /-

INR 156700.0 /-

INR 78.32 Lakhs /-