|
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 2 | 3 X 2.5 sq.mm |
| 3 | 3 X 4 sq.mm |
| 4 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 5 | 20 mm |
| 6 | 25 mm |
| 7 | 32 mm |
| 8 | Supplying and drawing of ULP 4 pair CAT 6 LAN cable in the existing surface / recessed steel/PVC conduit as required. |
| 9 | 1 run of cable |
| 10 | Supplying and fixing following rating, four pole, 415V isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 11 | 40 A |
| 12 | 63 A |
| 13 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 14 | 6 way(4+18), Double door |
| 15 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 16 | Single Ploe |
| 17 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 Volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 18 | 40 A |
| 19 | 63 A |
| 20 | Laying and fixing of one number PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 21 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 22 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 23 | 4 X 10 sq. mm (25 mm) |
| 24 | Supplying FRLS PVC insulated copper conductor, power cable of 1.1 KV grade of following sizes |
| 25 | 4 core 10 Sqmm |
| 26 | Providing ad fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable as required. |
| 27 | SITC of 24-port networking PoE switch 10/100/1000 Base-T-port and support for 2SFP+ or more uplink ports (should support SX, LX, SR and LR) with dedicated out of band management and console port. Switch should have option for External/Internal redundant power supply. The switch should support a minimum of 128 Gbps of switching fabric capacity with 95 Mpps forwarding capacity at wire rate. Switch should have at least 1 GB RAM & at least 1 GB flash for efficient performance. |
| 28 | Supply, Installation Testing and commissioning of Category 6, 24 port unloaded patch panel . Patch Panel should have integral cable management shelf complete in all respect as per specification attached. |
| 29 | Supply, Installation, Testing and commissioning of 1-U Cable Manager PVC duct type including all hardware accessories. |
| 30 | Supply and fixing OFC patch cord LC-LC SM OS2 LSZH 1 Mtr complete in all respect . |
| 31 | Supply, installation, testing and commissioning of Category 6, 4 pair 24 AWG stranded copper patch cords complete in all respect as per specification attached for below length. |
| 32 | 1 meter |
| 33 | 2 meter |
| 34 | Supply of Optic fibre 0S 2 - Loose tube Outdoor steel tape armoured – 12 Core cable as per specification attached etc as required complete in all respect. |
| 35 | Supply and fixing of Line Interface Unit (LIU) rack mounted in 1U 12 PORT, LOADED with 3 duplex LC type single mode adaptors ,6 Nos pigtails SC Single mode 9/125, 900 micron 1.5 mtrs, blank inserts & splice holder etc. complete in all respect |
| 36 | Supply, installation, testing & commissioning of fibre Optic module LR 1310 NM in Network Switch for connection with LIU by patch cord complete in all respect upto entire satisfaction of EIC. |
| 37 | Supply and fixing of 9U wall mounted modular fully loaded rack complete with all accessories as required. |
| 38 | Supply and fixing OFC core Splicing Complete in all respect. |
| 39 | Laying of one number OFC Cablein HDPE/PVC pipe as required. |
| 40 | Termination of CAT 6 with existing I/O socket on the bed head pendent including connections, ferruling, marking, testing and commissioning with Calibrated Penta Scanning report complete in all respect. |
| 41 | AddGST @ 6 % (MF 0.0633) |
