|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level andremoval of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth up to and including 60 cm girth |
| 3 | Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 4 | Painting withsynthetic enamel paint ofapproved brand and manufacture to give an even shade :One or more coats on old work. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. |
| 7 | Dismantling punched tape concertina coil in fencing including making rolls and stacking within 50 metres lead. |
| 8 | Dismantling welded spikes plates for replacement of barbed wire & re-assembling/ refixing the same with nuts, bolts & washers complete. (Cost of nuts, bolts & washers to be paid separately). Payment to be made per piece of spikes plates fitted. |
| 9 | Removing enamel paint by scrapping and sand papering and preparing the surface smooth etc. complete |
| 10 | Providing & Fixing of G.I. Barbed wire conforming to IS 278-1978 having weight not less than 108gm/metre and not more than 125 gm/metre dully dipped in anti -corrosive bitumastic paint(45 micron AV. thickness) to fencing post, struts and tightening up with G.I. wire of not less than 16 gauge at every length post with tightening bolt including fixing of \"U\" Clips, GI staples to posts as per directions of Engineers in charge. |
| 11 | Providing and Fixing of Galvanised punched type of Concertina Coil 1050 mm dia in between B S Fencing rows after removing deposited silt/earth if any and levelling and dressing of theground each coil to be laid in length of 10.00 Mtr including fixing with CC block of size 200 mm x 200 mm x 200 mm in C.C. 1: 2: 4 ( 1 cement: 2 coarse san : 4 graded stone aggregate 20 mm nominal size), tightening the Concertina Coil and Barbed Wire with the help of GI wire 16 guage after dipping each Concertina Coil in anti corrossive bitumastic paint to prevent corrossion etc complete as per direction of engineers in charge. |
| 12 | Lettering with black Japan paint of approved brand and manufacture |
| 13 | Credited to Govt by dismantling and taking away the GI barbed wire (in two rows) from existing two rows fencing fixed with angle iron posts at average spacing of 2.0 m as per standard drawing including dismantalling tightening bolts , hooks , GI staples and diagonal barbed wire safty without damage to steel section or alignment of existing angle iron post, collecting all the dismntled barbed wires, fittings and fixtures at identified places , removing all such dimantled materials from the site , clearing and cleaning the site from all dismantled materials and small pieces all complete as per direction of engineer in charge. Measuremet taken per meter length of fence |
| 14 | Credited to Govt by dismantling and taking away the existing concertina coil in B S fencing including untieing of GI wires from barbed wire and taking out spikes for CC blocks, rolling of coils and stacking of materials as per direction of engineer in charge (Galvanized punched tope concertina coil ( approx weight 12 kg / coil ) will be handed over to contractor by each no. of coil) |
| 15 | AddCost Index on DSR 2023 rates @ 55.14 % on schedule items (+) Rs. |
