Tender For Strengthening Of Community Center Electrical Work In Sector-19, Noida, 1 S/W of submain with 3nos. 2.5 sq.mmFR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289 (p) 2 S/F ofFan Regulator Dimmer type 300x400 watt ISI marked on the existing switch board including making connection, required material, laour T/P etc. for proper completion of work of Anchor/Kinjal make. As per PS No. 1203 3 Wiring point of light in 1.5 sq.mm FRESH FR PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conducter cable as earth wire drawan in existing inside the conduit. & Piano type switch and ceiling rose/angle /bettern holder 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS swich board box/junction box with dupply of all material labour & T&P etc. required for proper completion of the work as directed at iste by the engineer. complete in all respects As per PS No. 174C 4 Wiring point for ceiling fan in 1.5 sq. mm FR PVC insulated multistrand single core copper conductoer cabledrawn through existingPVC conduit with 1.5 sq. mm FR PVC insulated multistrand copper conducter cable as earth wire drawn in side the conduit. & 5Amp flush type switch and ceiling rose / angle / betten holder 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS swich board box/junction box with supply of all material labour & T &P etc. required for proper completion of the work as directed at site by the engineer.Complete in all respects As per PS No. 177C 5 S/f following piano type switch/socket on the exitsting switch box /cover including connection etc. as required. DSR 2018 1.23 a)5/6 amps, one way switch,DSR-2018, 1.23.1 6 b) 5/6 amps, two way switchDSR-2018, 1.23.2 7 c) 15/16 amps, one way switch,DSR-2018, 1.23.3 8 d)3 pin 5/6 amps socket outlet,DSR-2018, 1.23.4 9 e)6 pin 15/16 & 5/6 amps socket outlet,each DSR-2018, 1.23.5 10 S & F Brass batten/ angle holder incl connection etc as required DSR-2018, 1.34 11 Supply and fixing of power plug with 15A/240VV flush type switch and 5 Pin 15A/250V flush type universal socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic Laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer PS.No. 1139 12 wiring point of plug point in 1.5 sq.mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit. & flushtype switch and ceiling rose/angle/betten holder 3 mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS swich board box/junction box with supply of all material labour & T&P etc. required for proper completeion of the work as directed at site by the engineer. complete in all respects As per PS No.178C 13 S/W of submain withtwono. 6 sq.mmFR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289D 14 S/W of submain withtwono. 10 sq.mmFR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289 (G) 15 S/W of submain withtwono. 16 sq.mmFR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289 (J) 16 S/F of surface /flush mounting 6 ways TPN distribution boardwith additional metal doorwithout MCB complete in all respects as directed at site by E/I PS.No. 1027(A.) CAT-B 17 S/F of 63Amp 4 pole MCB (10KA)Havells make complete in respects. PS. No. 1020A CAT-A 18 Supply and fixing of recess/Surface/Pendent Mounting round 6 watt 8 watt LED Down lighter having powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. P.S. 1401 CAT-A 19 Supply and Fixing of LED Tube light batten Fitting suitable for upto 1x22 watt. LED tube lighton surface complete in all respects. P.S. 1413 CAT-AA 20 Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube ight fitting including tube on Surface complete in all respect. P.S. 1414 CAT- AAA 21 Erection and testing of ceiling fan and regulator etc. excluding supply of down rod,complete in all respects.PS.No. 1115 22 Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc. complete in all respect. P.S. No. 1120 23 Supplying of 1200 mm Dia ceiling Fan complete in all respects. AOR Pg. 24 S/F of SP MCB 6 Amp to 32 Amp Havells make 10 KA complete in all respects PS No. 1002 CAT-A 25 S&F of 40 Amp. DP MCB (10 KA) C Curve complete in respects. PS. No. 1010 CAT-B 26 Cement concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & Plants etc. Required for proper completion of the work. (SOR) 27 Cement with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. And Cement, in proportion of 8:4:1 in foundation and under floors, including supply of all materials, labour, tools & Plants etc. required for proper com completion of the work. (SOR-275) 28 M-150 Brick work in 1:4 cement & fine sand 2.20 F.M. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. Required for proper completion of the work.Schedule item No-305a P.W.D. (SOR) 29 Providing and fixing ofM.S. Special such as Tee, Bends, collars, Tapers, Gap pieces including Flange ends as required, painting, cutting, welding as per site requirement of MS pipe thickness etc. complete in all respect as per direction of E/I. (AOR) 30 Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specifiedsize and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted) DSR-2018, 11.5 31 Supply, Installation, Testing & Commissioning of Standrad 4 Mtr(Above Ground) hot dip galvanized(Granding of Galvanisation average 70 micron or better as per IS2629(AOR) 32 S/L of Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(PS No. 501) UPSR -2018Make -Plaza / Havells/Grandlay Cables/V-Marca)- 16 sq. mm 4 core 33 b)- 16 sq. mm 2 core 34 c) 50 Sq.mm. 3.5 Core 35 S/F of Plain or Pin type copper tin plated cable socket (Lug)to the cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I (PS No. 504) UPSR-2018a)-16 sq. mm 36 Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priminy coat of approved steel primer using structural steel etc. as required in gratings, frames guard bar, ladder, railings, brackets, gates and similar work (SOR Based on DAR 10.25.2) 37 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer in charge) 0.50mm (+0.05%)
