|
| 1 | Chair Dining - FD 279 :- DiMENSION : Overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200mm high. DESCRIPTION : Timber shall be seasoned teak wood (MP) 1st Quality. Front legs shall be of size 25mm x 50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40mm x 20mm in section side rails provided at 450mm from bottom legs. the top of side rails shall be at 450mm from bottom of legs. Two side stiffeners of 25mm x 40mmin section shall be provided jointing front and rear legs . the bottom side stiffeners shall be 100 mm above the bottom of legs. A middle stiffener of 25mm x 40mm in section front and rear wooden horizontal rails, joined by 40mm 20mm in section wooden side rails. 70mm x 10mm batten shall be provided in the middle. 45 mm x 10 mmbatten shall be provided with three equle gaps . 50mm thick ,the chair which shall be coverd seatwith nylon cane shall be woven as shown drawing . canning shall be done with 4mm wide cane in mat pattern or as directed by Engineer - in- charge in the seat,. the back rest the saphe of legs shall be as shown on drg. FINISH: all wooden surface shall be polished with two coats of melamine polish with spray machine after preparation of surfaces |
| 2 | CHAIR EASY FD- 229DIMENSION: Overall size shall be 510 mm long, 575mm wide and720mm high .DESCRIPTION:- All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rearTeak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown ondrawing and lower horizontal rail of back restshall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame|Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern.PVC shoes 25mmx25mm shall be provided at the bottom of all legs.FINISH:- All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish. |
| 3 | Chair Visitor with arms(FD- TP) as per Sample approve by AGE(I). |
| 4 | Chair Computer revolving with arms make Godraj (FD- TP) as per Sample approve by AGE(I). |
| 5 | TABLE PEG FD-384DIMENSION; Overall size shall be 450mm long,300mm wide and 380mm high.DESCRIPTION: Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed betweenthe legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of the table shall be of 18mm thick pre-laminated MDF board with 4mm teak wood edging all round the top oftable.FINISH: All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg. |
| 6 | SOFASET 5 SEATER WITH CUSHION FD/MAP-II//02 DIMENSION:-Overall size of three seat piece shall be 1730mm long, 745mm wide and 530mm high up to arm rest level.Overall size of one piece shall be 670mm long and 745 mm wideand 530mm high up to arm restlevel.DESCRIPTION: The sofa set to seat five shall consist of one large three seat piece and two small one seat pieces. All wood shall be of first class teak wood (MP) legs of sofa setshall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides.100mm thick seat cushionand back cushions shall be of size 530mm x 560mm (three numbers in seat and three numbers in the back for thelarge seat). In one seat sofa chair the cushion shall be one in backand one in seat of size 530mm x 560mm. The cushion shall be of cool foam or any other superior quality foam of 32 density as approved by Engineer-in-charge.Cushion shall be covered with approved color tapestry cloth(approved by GE , not less than Rs:300/meter) or as directed by Engineer-in-charge.FINISH: All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest.Rest all as per drg |
| 7 | TABLE CENTREFD- 274DIMENSION:Overall size shall be 900mm long, 450mm wide and 400mm high.DESCRIPTION: All wood shall be of teak wood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated particle board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws.FINISH:All wood surfaces shall be French polished with high gloss finish Rest all as per drg |
| 8 | Taking down broken/damaged top and fittings from Table Office Clerk (FD-1004) steel and supply and fixing new parts/fittings in the same with new top/fittings including applying one coats of synthetic enamel paint olive gren (first quality) over a coat of primer after preparation ofsteel surface complete all as specified and as and as directed for 19mm thick prelaminated particle board with one side teak venerred finish with 4mm thick wooden edging around, including 4 lever MS lock with brass link with duplicate key , removing old damaged drawer and providing new drawer made out of 22 gauge MS sheetincluding all items complete fixing as per drawing, painting all as specified and directed, Make of partice board : CENTURY PLY/ARCHID PLY/ KIT PLY/ BHUTAN BOARD. |
| 9 | Taking down broken/damaged top and fittings from TABLE OFFICE OFFICER STEEL (FD-1003) and supply and fixing new parts/fittings in the same with new top/fittings including applying one coat of synthetic enamel paint (Olive green) first qlty,over a coat of primer after preparation of steel surface complete all as specified and as directed for 19mm thick prelaminated particle board with one side teak veneered finish with 4mm thick plastic edging around, with 4mm thick wooden edging around, including 4 lever MS lock with brass link with duplicate key , removing old damaged drawer and providing new drawer made out of 22 gauge MS sheetall items complete fixing as per drawing, paintingall as Specified and as Directed. Make of particle board : CENTURY PLY/ARCHID PLY/KIT PLY/BHUTAN PLY) |
| 10 | Taking down broken/damaged top and fittings from TABLE STEEL WITH DRAWER 3\"X2\" (FD-1008) and supply and fixing new parts/fittings in the same with new top/fittings including applying one coat of synthetic enamel paint (Olive green) first qlty,over a coat of primer after preparation of steel surface complete all as specified and as directed for 19mm thick prelaminated particle board with one side teak veneered finish with 4mm thick plastic edging around, including 4 lever MS lock with brass link with duplicate key , removing old damaged drawer and providing new drawer made out of 22 gauge MS sheetall items complete fixing as per drawing, paintingall as Specified and as Directed. Make of particle board : CENTURY PLY/ARCHID PLY/KIT PLY/BHUTAN PLY) |
| 11 | Taking out/dismantling of worn out Seat Frame and BACK Frame from chair CB steel without Arm (FD-75 M) and supply and fixing new Seat Frame and fixed in the same chair canniing with 2mm wide halfround plastic cane and 4mm wide halfround plastic cane for border (Godrej pattern) including applying one coat of synthetic enamel paint (first quality) over a coat of primer after preparation of surface for SEAT FRAME & Back Frame all items fixing as per drawing. |
| 12 | Taking out/dismantling of worn out Seat Frame and Back Frame from Chair CB steel with Arm (FD-75 M) and supply and fixing new Seat Frame and fixed in the same chair canniing with 2mm wide halfround plastic cane and 4mm wide halfround plastic cane for border (Godrej pattern) including applying one coat of synthetic enamel paint (first quality) over a coat of primer after preparation of surface forSEAT FRAME & Back Frame all items fixing as per drawing.. |
| 13 | Removing unserviceable 12mm thick ply top from theGI Charpoy (FD-220)and providing 12mm thick plywood (7 ply) commercial grade of size (1.98m x 0.92m) including necessary drillingholes ion GI pipe n exe. 6mm dia depth exe 25mm & n exe 40mm and also drilling holes in 12mm thick plywood including and providing nuts & bolts& washers (Machine made) length of bolt n exe 75 mm & dia of shunk 10mm alongwith mild steel square pipe of size 25mm x 25mm as stiffners (02 Nos) for supporting the plywood alongwioth one coat of red oxide primer on MS stiffners and nut & bolts including GI 3 way elbow 32 mm medium grade GI pipe complete all as directed. Make of plywood : Century ply/Archid Ply/Kitply/Bhutan Board |
| 14 | Taking out UNSV front & Rear legs from chair writing including back rest made of 2nd class hard wood ,Material and labour for preparation of wooden surfaces of chair writing and polishing of repaired chair writing with two or more coats of French polish upto glossy finish, complete all fixing items as specified and directed and Material and labour removal of old existing unserviceable cane from chair writing and recaning (seat or back) in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing [Make: Arya/Ajay/Supreme] |
| 15 | Taking out UNSV front & Rear legs from chair dining including back rest made of 2nd class hard wood ,Material and labour for preparation of wooden surfaces of chair dining and polishing of repaired chair dining with two or more coats of French polish upto glossy finish, complete all fixing items as specified and directed and Material and labour removal of old existing unserviceable cane from chair dining and recaning (seat ) in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing [Make: Arya/Ajay/Supreme] |
| 16 | Taking out unserviceable rail/bead & Rear, front legs from chair easy and Supply and Fix new rail/bead, rear and front legs made of 2nd class hard wood with suitable holes for caning,Material and labour removal of old existing unserviceable cane from chair easy and recaning (seat and back ) in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing including and polishing of repaired chair easy with two or more coats of French polish upto glossy finish, all fixing [Make: Arya/Ajay/Supreme] complete all as specified and as shown on drawing(s). |
| 17 | Material and labour for preparation of wooden surfaces of sofa set 5/3 seaters and polishing of sofa set 1/5/3 seaters with two or more coats of French polish upto glossy finish, complete all as specified and as directed and taking out rear and front legs unsv from sofa set 3/5 seater including batten and rail/bead and fix new rail, rear and frontlegs and battens made of 2nd class hard wood. |
