|
| 1 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard and dense soil complete all as specified and as directed. |
| 2 | Returning, filling, inincluding spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed. |
| 3 | Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. |
| 4 | S&F in repairs, Non return sluice valve (heavy duty) with stainless steel spindle heavy duty conforming to IS 14846 (2000) both end flanged class PN 1.6 of size 150 mm dia including necessary nuts,bolts washers and gasket complete all as specified and as directed. |
| 5 | S&F in repairs, Non return sluice valve (heavy duty) with stainless steel spindle heavy duty conforming to IS 14846 (2000) both end flanged class PN 1.6 of size 100 mm dia including necessary nuts,bolts washers and gasket complete all as specified and as directed. |
| 6 | Taking up 150mm bore CI/DI water main including all fittings with any type of joint from trenches complete all as specified and as directed. |
| 7 | Taking up 100mm bore CI/DI water main including all fittings with any type of joint from trenches complete all as specified and as directed. |
| 8 | Supply, laying, testing 150mm dia ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push-on - joint with inside cement mortar lining, internal metallic zinc coating and external black bitumen coatingduly ISI marked laid in trenches including making good disturbed surfaces of road /pavement/PCC surface as requiredcomplete all as specified and as directed. Make:- Electrosteel/Jindal/Tata / Jai Balaji Industries Ltd |
| 9 | Relaying old serviceable 150mm bore cast/ductileiron pipesand connections as obtained from taking down including provision of new/oldfittings,in new or old position laid in trenches after cleaning by suitable chemical complete all as specified and as directed.Note : New fittings shall be measured and paid separately. |
| 10 | Supply, laying, testing 100mm dia ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push-on - joint with inside cement mortar lining, internal metallic zinc coating and external black bitumen coatingduly ISI marked laid in trenches including making good disturbed surfaces of road /pavement/PCC surface as requiredcomplete all as specified and as directed. Make:- Electrosteel/Jindal/Tata / Jai Balaji Industries Ltd |
| 11 | Relaying old serviceable 100mm bore cast/ductileiron pipesand connections as obtained from taking down including provision of new/oldfittings,in new or old position laid in trenches after cleaning by suitable chemical complete all as specified and as directed.Note : New fittings shall be measured and paid separately. |
| 12 | M & L for Ductile iron fittings class K-12, PN-10 confirming to IS 9523/2000for spigot and socket pipes of size upto 150mm boresuch as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket, etc), Tee pieces single branch, \"Y\"junction, double branch, cross(all sockets or socket and spigot), collars caps and plugs complete all as specified and as directed.Make:- Electrosteel/Jindal/Tata / Jai Balaji Industries Ltd |
| 13 | Cutting CI/DI pipes of 150 mm bore and reducing to required length before laying, in position for insertion of new tees, branches, etc complete all as specified and as directed. |
| 14 | Cutting CI/DI pipes of 100 mm/80mmbore and reducing to required length before laying, in position for insertion of new tees, branches, etc complete all as specified and as directed. |
| 15 | S&F in repairs, sluice valve (heavy duty) with stainless steel spindle heavy duty conforming to IS 14846 (2000) both end flanged class PN 1.6 of size 100 mm dia including necessary nuts,bolts washers and gasket complete all as specified and as directed. |
| 16 | S&F in repairs, sluice valve (heavy duty) with stainless steel spindle heavy duty conforming to IS 14846 (2000) both end flanged class PN 1.6 of size 80 mm dia including necessary nuts,bolts washers and gasket complete all as specified and as directed. |
| 17 | S & F in repairs, Pressure Guage of dial 100mm, pressure rating 0-14 Kgs rating including all accessories complete all as specified and as directed |
| 18 | M&L for construction of valve pitof size 1.2 m x 1.2 m x 0.9 m (internal dimension)one brickthick wall, rendering 15 mm thick in CM 1:4 internally & externally (15cm depth below GL) finished even & smooth without using extra cement and applying three coat of white wash,mild steel sheet covermade of mild steel sheet, 3 mm thickand 40 mmx 40 mm x 6mm thick mild steel angle iron frame including locking arrangement,handle etc and painting with two coatsof synthetic enamel paint over a coat of red oxide primer after preparation of surfaces including demolition of existing brick masonry valve pit complete all as specified and as directed. |
