Tender For Civil Works Related To Establishment Of Test Laboratory For Inspection/Test Of Quality Of Civil Works Under Electricity Civil Circle (Distribution) , Agra, Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20) Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21) RCC work with cement, approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.. (CSI No. 5.23) First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5)mortar in Super structure of one Brick thick including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.01+6.07+6.08) First class brick work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in Super structure for walls of 1/2 brick (115 mm) thickness including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03+6.07+6.09) P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+) 2 microns tolerance The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.52) Same as above item No. 8.52 but for openable window portion as shown in drawings, including cost of Aluminium hinges and all other fittings like concealed tower bolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.53) Same as in item No. 8.52 but for openable gate/door portion as shown in drawings including cost of hinges and Aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.54) Supply and fixing of 32 mm thick single leaf flush door shutter (boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.57) Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all Imaterials supplied by contractor (CSI No. 9.01) TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) Add for extra labour and materials for plaster over rough face of one brick thick wall. (CSI No. 11.12) 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work without base CC(CSI No. 12.04) Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make,, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 12.11) Supply and Laying 6 mm thick glazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12) Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.14) Providing and fixing 15 mm thick Industrial tiles size 600 x 600 mm to of Johnson Endura Meteor or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (NSI) Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in- charge. (NSI) Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint Luxol or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.01) As in item 13.01 above but every coat after the first coat. (CSI No. 13.02) As in item 13.01 above but for every coat on previously painted old wood or iron work including its sand papering, rubbing and cleaning as required, for proper completion of work. (CSI No. 13.03) One priming coat and one coat oil bound distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 13.08) As in item 13.08 but for every coat after the first coat. (CSI No. 13.09) As in item 13.08 but for every coat on previously old oil bound distemper surface. (CSI No. 13.10) Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & Petc required for proper completion of work. (CSI No. 13.20) Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as perrequirement and direction of E/I including cost of all material, labour and T&P required for proper completion of work. (CSI No.13.21) Finishing walls with water proof exterior emulsion paint of ACE (ASIAN) or equivalent brand on already well prepared new wall surfaces with one coat of primer (ICI) followed by two coats of ACE exterior empulsion paint to give an even shade including thorough washing with water including as per direction of E/I direction of including cost of all materials, labour, T&P etc requried for proper completion of the work (NSI) Finishing walls with water proof exterior emulsion paint of ACE (ASIAN) or equivalent brand on old surfaces to give an even shade including thorough washing with water including as per direction of E/I direction of including cost of all materials, labour, T&P etc requried for proper completion of the work (NSI) Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12) Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY (200gm) (L&K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16 b) P/F 20 mm dia ISI approved CPVC pipes complete with special such as bend tee. socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials labour and T&P complete (CSI No. 26.20) P/F 25 mm dia ISI approved CPVC pipes complete with special such as bend tee, socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed Gl fitting where required, cutting and making good the walls etc and all materials labour and T&P complete (CSI No. 26.21) Providing and fixing in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED) including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26) Providing and laying SWR, PVC (Finolex or equivalent) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29 c) 110 mm dia 32 mm dia. CP BRASS WASTE FOR WASH BASIN/SINK (CSI.No. 2.19 4f+10%C.P) Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. (CSI No. 28.39) Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed. 2018 PWD 121C Wiring points for two ways light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, GP Box, two ways 2 nos. piano type switches & ceiling rose/ angle/ batten holder on 3mm. thick phenolic laminated backelite sheet etc., complete in all respect, as directed. 2018 PWD 1220 Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect 2018 PWD 123C Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, GP Box and piano type switch and socket etc. complete in all respect. 2018 PWD 124C Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC Conduit with one number 2.5Sq.mm multistrand copper conductor cable as earth continuity wire, complete in all respect. 2018 PWD 211C Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer 2018 PWD 1139 S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect, as directed at site by Engineer in charge 2018 PWD 1022 CAT (B) S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve 1002 PWD CAT B S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 2018 PWD 1413(A) CAT AA
