Bids Are Invited For TLMW62729330 P/S SOLID CARBIDE TAPERED BALL NOSE CUTTER, HALF TAPER ANGLE= 4 DEG. , FUTURA/TIALN COATED (Q3) , TLMW62729543 P/S SOLID CARBIDE END MILL, Z= 4 FUTURA/TIALN COATED, SHANK DIA= 10MM SIZE: DIA 10X22X90 M (Q3) , TLMW62733354 PARALLEL SHANK SOLID CARBIDE END MILL, DIAMETER: 20MM, CORNER RADIUS R2, SHANK DIA: 20M, Z (Q3) , TLMW62738003 P/S SOLID CARBIDE TAPER BALL NOSE END MILL, BALL DIA= 6MM, Z= 4, FUTURA/TIALN COATED, HALF T (Q3) , TLMW62738011 P/S SOLID CARBIDE END MILL TORUS CUTTER, FUTURA/TIALN COATED, THREE NO OF INTERNAL COOLAN (Q3) , TLMW62738372 COROMILL PLURA SOLID CARBIDE END MILL CUTTER DIA 12, R2.5 GRADE 1620 OF M/S SANDVIK ORD (Q3) TLMW62738399 PARALLEL SHANK SOLID CARBIDE END MILL, FUTURA COATED, DIA 20MM, R3.0 OF M/S STARRAG ORD (Q3) , TLMW62745034 SOLID CARBIDE END MILL CUTTER DIA: 10, R1, LENGTH= 72, SHANK DIA: 10 (COATING OF TIALN) , M (Q3) , TLMW62745115 P/S SOLID CARBIDE END MILL, CENTRE CUTTING, Z= 4, HELIX ANGLE= 45 DEG. , RH CUTTING, TIALN CO (Q3) , TLMW62750739 P/S SOLID CARBIDE END MILL SHANK DIA: 10MM, FUTURA COATED Z= 4, RADIUS R2.5 SIZE: 10 X 25 X (Q3) , TLMW62750747 P/S SOLID CARBIDE END MILL SHANK DIA: 10MM, FUTURA COATED Z= 4, RADIUS R3.0 SIZE: 10X 25 X (Q3) , TLMW62750801 P/S SOLID CARBIDE TAPER BALL NOSE END END MILL, SHANK DIA: 16 K-8, Z= 2, HALF TAPER ANGLE= 6 (Q3) , TLMW62750844 P/S SOLID CARBIDE END MILL, Z= 4 FUTURA COATED, RADIUS R2.0 SIZE: DIA: 16 X 35 X 110MM, R2.0 (Q3) , TLMW62755013 SOLID CARBIDE PARALLEL SHANK END MILL DIA: 12MM, RIGHT HAND CUTTING WITH RIGHT HAND HELIX (Q3) Total Quantity : 1465
