Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #43740474

Conversion The Existing Wss Into Piped Water Supply Scheme Under Jjm By Extension Of Distribution Pl And Provision For Providing Fhtc In The Vill-Biliyan Of Gp-Padaliyan, Block-Bhinai Under Revise Proposal With 1 Yr Defect Liabilty.

Issued by Government Departments · kekri, Rajasthan
Tender Value
11.31 Lakhs
Estimated cost
Bid Submission
01 Jul 2024
0 days left
EMD
22620
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kekri → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Conversion the existing WSS into piped water supply scheme under JJM by Extension of Distribution PL and Provision for Providing FHTC in the vill-Biliyan of GP-Padaliyan, Block-Bhinai under revise proposal with 1 yr defect liabilty.

BOQ

Name of Work: Conversion the existing WSS into piped water supply scheme under JJM by Extension of Distribution PL and Provision for Providing FHTC in the vill-Biliyan of GP-Padaliyan, Block-Bhinai under revise proposal with 1 yr defect liabilty.
Sl. No. Item Description
1Providing, lowering, laying in trenches, alligning, fixing in positionand jointing DI ISI marked K-7 grade S&S pipes as per IS:8329-2000 (ammended up to date) with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS:5382-1985 including specials (tees, bends etc.)complete including all material, labour hydraulic testing and commissioning (exclding earth work) as per technical specifications and direction of Engineer Incharge. with excise duty exemption.
2100 mm
3Providing, lowering, laying and jointing in trenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended upto date)with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe byelectro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) .Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply may be in coil or straight length in 6 M/12 M.
4110 mm dia
5Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
6In all type of soil
7In Ordinary Rock
8Dismantling of cement concrete pavement for pipe lineand chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
9Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified,complete work as per technical specification and scope of work.
10M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mmnominal size).
11Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding,lowering,laying,aligning,fixinginpositionatalllevel/ depths in trenches complete includingall taxes, material,labour, inside lining, outside coating, testingandcommissioning alongwithpipelineaspertechnicalspecifications anddirection of Engineer-in-charge.
12MS pipespecialsupto600mmdia (withminimum5mmthickness sheet)
13Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanisedrubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367(Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitablesupport structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6
1480 mm dia
15100 mm dia

AI Tender Summary

OUR REF NO 43740474
AUTHORITY Government Departments
TENDER VALUE 11.31 Lakhs
LAST DATE 01-07-2024
Authority
Authority Name Public Health Engineering Department
Work Description Conversion the existing WSS into piped water supply scheme under JJM by Extension of Distribution PL and Provision for Providing FHTC in the vill-Biliyan of GP-Padaliyan, Block-Bhinai under revise proposal with 1 yr defect liabilty.
Basic Detail
Tender No EE_PHED_DIVISON_KEKRI NIT NO 20 TO 26
Bidding Type Tender
Location
City kekri
State Rajasthan
Key Dates
Publish Date 17 Jun 2024
Submission Date 01 Jul 2024
Open Date 02 Jul 2024
Finance
Tender Value 11.31 Lakhs
Tender Fee 1000
EMD 22620
Exemption Available
Document List
322eff55-cc29-4950-bdac-39428b48377c.html
Tendernotice_1.pdf
26Merge.pdf
BOQ_709202.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 17, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 01, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 02, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

322eff55-cc29-4950-bdac-39428b48377c.html

pdf

Tendernotice_1.pdf

pdf

26Merge.pdf

xls

BOQ_709202.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender