Tender For Purchase Of Supply And Delivery Of 6000 Litter Capacity Cesspool Tankers In Kottur Town Panchayat., kottur-Tamil Nadu

Tender For Purchase Of Supply and Delivery Of 6000 Litter Capacity Cesspool tankers In Kottur town Panchayat.; 1 Features vacuum pump Typecooling Rotary slidling vane Air cooled,suction hose Dia /Length/Qty 4/3 mtr /6nos,sludge suction & Drain Calve size 4 Type knifegate Hyd pump typenot applicable Drive applicable.Capacity Tank Volume water storagetank -1000ltr and Sludge storage tank-5000ltr.Vaccum Pump make Jurop/Moro/Gardener denver mistral/Battioni or equvaient. Flow /Vacuum 500-500Cum./hr/90%.Jetting Pump Working Pressure 150-160 bar hose length 100-150m size 1 diawater flow for pump of jetting machine 250- 300 LPM minimum burst pressure of jetting hose 500-520 Bar maximum working pressure of jetting hose 200-220 BarSafty Waterlevel indicatortype/Qty. tube type /02,pressure relief valve size/Qty.2/1 nos Vacuum relief valve Size/Qty 1.5/1 Nos.Mounting Chassis GVW 12 Ton Emission NormsAs Per Local RTO ,chassis Engine output Min.90 HP Drivers Cabin Type Single (Day) Cabin Make Ashok Leyland /Tata/Eicher /Equivalent with PTO with emission norms BSVI make /Model/wb/hp/Side PTO Provision any other equivqlent model of other chassis manufacturers. Scope customer Side PTO Provision required. Dimensions Equipment : equpment length 4500-5150 mm approx .Equipment height 1500 - 2200 mm approx,Overall width 2000-2250 mm approx overall length 3000 - 3500 mm approx. equipment rear overhang 600 -1600 mm approx Painting surface preparation and finish euipment exterior Spray painted with two coats of superior quality anti-corrosive primer and two coats of enamel metal paint color code will be as per customer /tender requirements,tankers Interior Coated with 2 coats of superior quality anti-corrosive grey paint Including GST. 2 Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all Slabsetc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6) 3 Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3. 4 Providing and erecting Single sided Double Guard system copressing 3 mm thick wall w beam posts and channels., 5 Providing Road Marking with Hot Applied Thermo Plastic compound of Best Quality including cost and conveyance and labour charges etc complete. 2.5 mm thick including reflectorising glass beads @250 gm per sqm.

Refer document

INR 43250.0 /-

Refer document