Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-07-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-07-2024 |
| Sl. No. | Item Description |
| 1 | M&L for attending any kind of fault/breakdown/lekage (in the water pump/pipe line /tanks) 24x7 hrs with one mechaninc and one helper complete all as specified and directed.Note : minor spares such as thread ,lube etc deemed to be included in the quoted rate |
| 2 | M&L for Cleaning of RCC under ground water Sump of capacity upto 50,000 gallons by wire brushing and bleaching the internal surface ofsump with Bleaching powder,including removing all scales dust , pit dirt and mud, removing the sediments using pump tooutside of defence land and carryout two coats of cement base paint on external exposed concrete/ plastered surface of under groundsump and endorsing date of cleaning on the outer wall of under ground sump with synthetic enamel paint with words not less than 50mm height complete all as specified and directed by Engineer-in-charge. |
| 3 | Material & Labour for cleaning of RCC water tankson terrace by dewatering the complete tank, removing the sediments settled at the bottom of tank, scraping the walls and bottom of tank with wire brush and cleaning with bleaching powder solution, washing with clear water and applying one coat of white wash both internally and externally and writing the date of cleaning, due date of cleaning and capacity of tank in paint including removing of any vegetation growth on and around the tank for Overhead reservoir of capacity 25,000 litres with 2m staging complete all as specified and directed. |
| 4 | M&L for cleaning of surrounding of sump including grass cutting ,removing useless scraps , debriand maintaing the surrounding good and hygenic to avoid the water polution due to insects and mosquito complete all as specified and directed.Note : contractor must visit the site before quoting the rate of this item |
| 5 | M&L for painting the outer wall of 50 Gallon sump with a colour decided by engr in charge complete all as specified and directed. |
| 6 | M&L for covering the 25000 ltr RCC tank placed above each block (A,B,C) by MS sheet of cross section2x2 sqftproperly by making the locking arrangments also complet al as directed by engr in charge .Note :MS sheet must be painted before installation thoroughly to avoid rusting due moisture complete all as specified and directed.Note: Conttractor must visit the site before quoting the rate of this item |
| 7 | M & L in replacemntpump unit only of a monoblock pump suitable for 75 HP motor 3 phase 415 v,50hz made of CI,MS,SS head range 28-44 ,discharge 10.3-4.7 size (suc x del) 65x65 mm power 5.5 kw protection IP 55 complete all as specified and directed.Note: Testing certifcate must be submitted after intallation, installation of new unit and taking out the old unit is the responsibility of contractor only. |
| 8 | M & L for servicing including dismantling of water pumping set centrifugal type suitable for 75 HP cap. Electric motor ,type DSM100/36, discharge 2475 LPM at 250 feet, and transporting to local workshop for necessary lathe work , metal filling , impeller servicing and taking back to site , refixing the same, including testing on completion to the entire satisfaction of Engr -in -Charge complete all as specified and directed.NOTE : Spares parts if required shall be measured & paid separately under relevant items of Sch from Item No 11 to 13 |
| 9 | M & L for rewinding 75 HP motorof centrifugal pump with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropriate class, drying varnishing etc including base repairs if requiredincluding cleaning and re-fixing complete all as specified and directed. |
| 10 | M & L for servicing including dismantling of water pumping set centrifugal type suitable for 30 HP cap. Electric motor , pumping head 67 m, discharge 24 LPS, type DSM-3 ME and transporting to local workshop for necessary servicing as under and taking back to site, refixing the same, including testing on completion to the entire satisfaction of Engr -in -Charge complete all as specified and directed.NOTE : Spares parts if required shall be measured & paid separately under relevant items of Sch from Item No 11 to 13 |
| 11 | Supply only in replacementneck ring of existing size as per sample suitable for fixing in shaft assembly complete all as specified and directed. |
| 12 | Supply only in replacement shaft assembly as per sample for centrifugal pump complete including lathe work complete all as specified and directed. |
| 13 | Supply only in replacementglandof heavy duty and superior quality as per sample complete all as specified and directed. |
| 14 | Supply and fix in replacement submersible electric pump 5 HP cap complete to the entire satisfaction of Engr -in -Charge complete all as specified and directed. |
| 15 | Supply and Fix in replacementstar delta starter fully automatic suitable for 75 HP motor 415V, AC complete all as specified and directed. |
| 16 | M&L in replacement100 mm dia sluice valve Cast Iron PN-1 with both ends flanged and drilled and fixed by means of nuts,bolts and including provision of rubber insertion complete all as specified and directed. |
| 17 | M&L in replacement80 mm dia sluice valve Cast Iron PN-1 with both ends flanged and drilled and fixed by means of nuts,bolts and including provision of rubber insertion complete all as specified and directed. |
| 18 | Supply and fixin replacement50 mm dia gate valve , gun metal ,heavy duty, screwed down both ends, with iron wheel head complete all as specified and directed. |
| 19 | Supply and fix in replacement 40 mm dia gate valve , gun metal ,heavy duty, screwed down both ends, with iron wheel head complete all as specified and directed. |
| 20 | S&F in replacement GI pipe 40 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow, nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed. |
| 21 | S&F in replacement GI pipe 50 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow, nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed. |
| 22 | S&F in replacement GI pipe 80 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow, nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed. |
| 23 | S&F in replacement GI pipe 100 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow, nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed. |
| 24 | S&F in replacement GI Tee medium grade 50 mm dia complete all as specified and directed.Make:- Unik/Jindal/Tata |
| 25 | S&F in replacement GI nipple/socket medium grade 50/40/25 mm dia complete all as specified and directed.Make:- Unik/Jindal/Tata |
| 26 | S&F in replacement GI nipple medium grade 80 mm dia 4\" long complete all as specified and directed.Make:- Unik/Jindal/Tata |
| 27 | S&F in replacement GI union medium grade 80 mm dia complete all as specified and directed.Make:- Unik/Jindal/Tata |
| 28 | Supply & fixing in replacement Cast iron non return Valve ( Reflex) with flanged ends , swing type design as per ISI marked of size 80 mm dia complete all as specified and directed.Make :Leader/Zoloto/Kirloskar |
| 29 | Supply& fixing in replacement Cast iron non return Valve ( Reflux) with flanged ends , swing type design as per ISI markedof size 100 mm dia complete all as specified and directed. Make :Leader/Zoloto/Kirloskar |
| 30 | Supply& fixing in replacement Cast iron foot valve, swing type design as per ISI marked of size 80 mm dia complete all as specified and directed. Make :Leader/Zoloto/Kirloskar |
| 31 | Supply& fixing in replacement Cast iron foot valve, swing type design as per ISI marked of size 100 mm dia complete all as specified and directed. Make :Leader/Zoloto/Kirloskar |
| 32 | Supply and filling calcium hypochlorite 65% to 70% chlorine content (in drum) in the form of granular and tablet form complete all as specified and directed. |
| 33 | M&L for servicing and rewinding of motor in DOSING pump complete all as specified and directed. |
| 34 | M & L in replacemntpump unit only of a monoblock pump suitable for 15 HP motor 3 phase 415 v,50hz made of CI,MS,SS head range 28-44 ,discharge 10.3-4.7 size (suc x del) 65x65 mm power 5.5 kw protection IP 55 complete all as specified and directed.Note: testing certifcate must be submitted after intallation ,installation of new unit and taking out the old unit is the responsibility of contractor only. |
| 35 | Material & Labour for cleaning of rotational moulded PVC water storage service tanks of 5000 litres capacity on buildings by dewatering complete tank, removing sediments settled at the bottom of tank and scraping the walls and bottom of tank and cleaning with bleaching powder solution, washing with clear water and writing the date of cleaning and due date of cleaning in white paint complete all as specified and directed.Note: PVC water tanks clean in every 4 months |
| 36 | All as per Item No 35 above but for PVC water storage service tanks of 2000 litres capacity complete all as specified and directed. |
| 37 | All as per Item No 35 above but for PVC water storage service tanks of 1000 litres capacity complete all as specified and directed. |
| 38 | M & L for servicing including dismantling of water pumping set centrifugal type suitable for 15 HP cap. Electric motor , pumping head 67 m, discharge 24 LPS, type DSM-3 ME and transporting to local workshop for necessary servicing as under and taking back to site, refixing the same, including testing on completion to the entire satisfaction of Engr -in -Charge complete all as specified and directed. NOTE : Spares parts ifrequired shall be measured & paid separately under relevant items of sch from Item No 40 to 42 |
| 39 | M&L for rewinding of 15 HP centrifugal type water pump with copper enamled wire including overhauling and servicing complete all as specified and directed. |
| 40 | Supply only in replacement neck ring of existing size suitable for fixing in shaft assembly complete all as specified and directed. |
| 41 | Supply only in replacement shaft assembly complete including lathe work complete all as specified and directed. |
| 42 | Supply only in replacement locking bolt of heavy duty and superior quality complete all as specified and directed. |
| 43 | M&L for Servicing of dosier pump ,complete overhauling including winding of single phasemotor used in it complete all as specified and directed. |
| 44 | Supply and fix in replacement 25 mm dia gate valve , gun metal ,heavy duty, screwed down both ends, with iron wheel head complete all as specified and directed. |
| 45 | S&F in replacement GI pipe 25 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow, nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed. |
| 46 | S&F in replacement GI union medium grade 50/40/25mm dia complete all as specified and directed.Make:- Unik/Jindal/Tata |
| 47 | Supply& fixing in replacement Cast iron non return Valve ( Reflex) with flanged ends, swing type design as per ISI marked of size 40 mm dia complete all as specified and directed. Make :Leader/Zoloto/Kirloskar |
| 48 | Supply& fixing in replacement Cast iron non return Valve ( Reflex) with flanged ends, swing type design as per ISI marked of size 25mm dia complete all as specified and directed. Make :Leader/Zoloto/Kirloskar |
| 49 | Supply and fixin replacement 50 mmball brassvalve,high pressure, with polythene float and flynut complete,screwed for iron pipe all as specified and directed by Engineer in Charge |
| 50 | Supply and fixin replacement 40 mmball brassvalve,high pressure, with polythene float and flynut complete,screwed for iron pipe all as specified and directed by Engineer in Charge |
| 51 | Supply and fixin replacement 25mmball brassvalve,high pressure, with polythene float and flynut complete,screwed for iron pipe all as specified and directed by Engineer in Charge |
| 52 | S&F in replacement 5000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed. |
| 53 | S&F in replacement 2000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed. |
| 54 | S&F in replacement 1000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed. |
| 55 | S&F In replacement float valve suitable for 15/25/40/50 mm dia of GI pipe complete all as specified and directed. |
| 56 | M & L in replacement for steel structure frame made out of size 75 cm X 50 cm with 10 mm thick MS channel as rectangular shapesuitable for 15/25 HP motor for mounting on PCC base with the help of nuts-bolts including welding,drilling,PCC work, painting with synthetic enamel paints with two coats of smoke grey over a coat of red oxide primer complete all as specified and directed. |
| 57 | M & L for servicing of DG set 200 KVA capacity of by taking out unserviceable spares, cleaning by brushing to remove dust including cleaning of filter, checking of all nuts, bolts tightening wherever necessary, check up engine oil level, coolant level and labour for top up if necessary, adjustment belt tension, tuning of engine, adjustment of speed, alternator voltage, frequency etc, greasing, oiling and checking for smooth functioning of DG Set complete all as specified and directed.Note: Minor spares like nuts,bolts etc costing each up to Rs 300 shall be deemed included in the rate quoted above |
| 58 | M&L for \"D\" check of DG set 200 KVA including dismantling of DG sets for thoroughly overhauling complete all as specified and directed. |
| 59 | M & Lfor servicingof AMF Panel for 200 KVA Gen set complete including labour forreplacement ofunserviceable spares, testing complete as all specified and directed.NOTE : Unserviceable spares required to be replaced shall be measured and paid for separately under respective items of Sch from item No 60 to 62 |
| 60 | Supply only fan belt B-56, for DG set 200 KVA capacity complete all as specified and directed. |
| 61 | Supply only air cleaner forDG set 200 KVA capacity complete all as specified and directed. |
| 62 | Supply only Diesel Filter for DG set 200 KVA capacity complete all as specified and directed. |
| 63 | Supplyonly in replacemnetKirloskar engine Oil 20W 40 for DG set 200 KVA capacity complete all as specified and directed. |
| 64 | Supply only coolant ready mix complete all as specified and directed. |
| 65 | S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes 50 Sqmm complete all as specified and directed. |
| 66 | S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes 70 Sqmm complete all as specified and directed. |
| 67 | S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes 120 Sqmm complete all as specified and directed. |
| 68 | S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes 185 Sqmm complete all as specified and directed. |
| 69 | S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes 240 Sqmm complete all as specified and directed. |
| 70 | S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes 400 Sqmm complete all as specified and directed. |
| 71 | M&L in replacement plate earthing for sub station equipment complete with galvanisedmild steel plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground vertically (earth pit not less than2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of HT/LT equipment etc at the other end, earth strip encased in and including 50mm boreGI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering GI pipe medium grade 20 mm bore complete with earth pit complete all as specified and directed. NOTE : Quoted rated shall be deemed to include main earthing lead/earth strip to test point upto 7.5 metre |
| 72 | S&F in replacement of power contactor ML-2 type complete all as specified and directed. |
| 73 | S&F in repair LEDstreet light luminare pressure dia cast aluminium housing with heat resistant toughened glass and IP 66 protection, of 120 Watt capacity along with LED bulb complete including making necessary electric connections complete all as specified and directed. |
| 74 | S&F in repair LEDstreet light luminare pressure dia cast aluminium housing with heat resistant toughened glass and IP 66 protection, of 90 Watt capacity along with LED bulb complete including making necessary electric connections complete all as specified and directed. |
| 75 | S&F in repair LEDstreet light of 60 watt luminare pressure dia cast aluminium housing with heat resistant toughened glass and IP 66 protection, of 60 Watt capacity along with LED bulb complete including making necessary electric connections complete all as specified and directed. |
| 76 | S&F in repair service wire 1100 VoltsPVC insulated with stranded copper conductor , served with inner sheathing of PVC tape and overall PVC Sheathed of size 2x4 sqmm twin core flat complete all as specified and directed. |
| 77 | S&F in repair service wire 1100 VoltsPVC insulated with stranded copper conductor , served with inner sheathing of PVC tape and overall PVC Sheathed of size 2x6 sqmm twin coreflat complete all as specified and directed. |
| 78 | S & F in replacement of MCCB 4 Pole 415 Volt fixed type 63 Amps with breaking capacity 10 KA complete all as specified and directed. |
| 79 | S & F in replacement of MCCB 4 Pole 415 Volt fixed type100 Amps with breaking capacity 16 KA complete all as specified and directed. |
| 80 | S&F in replacement of MCCB 4 Pole 415 Volt fixed type125 amps with breaking capacity 25 KA complete all as specified and directed. |
| 81 | S & F in replacement of MCCB 3 Pole 415 Volt fixed type 200 Amps with breaking capacity 25 KA complete all as specified and directed. |
| 82 | S & F in replacement of MCCB 3 Pole 415 Volt fixed type 250 Amps with breaking capacity25 KA complete all as specified and directed. |
| 83 | S & F in replacement of MCCB 4 Pole 415 Volt fixed type400 Amps with breaking capacity 35 KA complete all as specified and directed. |
| 84 | S & F in replacement of MCCB 4 Pole 415 Volt fixed type600 Amps with breaking capacity 35 KA complete all as specified and directed. |
| 85 | S&F in repair factory made epoxy powder coated distribution board TP&N 4 ways (VTPN MCCB DB) with metal doorsuitable for one FP-MCCB 100 Amps as incomer and 12 SP MCBs or 4TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed.Note : Rate of MCCB is deemed to be included in the quoted rate |
| 86 | S&F in repair factory made epoxy powder coated distribution board TP&N 8 ways (VTPN MCCB DB) with metal door suitable for one FP-MCCB 125 Amps as incomer and 24 SP MCBs or 8TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed.Note : Rate of MCCB is deemed to be included in the quoted rate |
| 87 | S&F in repair factory made epoxy powder coated distribution board TP&N 12ways (VTPN MCCB DB) with metal door suitable for one FP-MCCB 160 Amps as incomer and 36 SP MCBs or 12TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed.Note : Rate of MCCB is deemed to be included in the quoted rate |
| 88 | S&F in repair digital type Ampere meterrange 0-(100/ 200/ 400/ 1000) / 5 Amps, square type, flush mounted of size 96 mm x 96 mm including provision of CTs and selector switch ofproper ratio size and making connection with copper conductor cable of suitable size complete all as specified and directed. |
| 89 | S&F in repair digital type volt meterrange upto 1000v AC-panel mounting type, square type, flush mounted of size 96 mm x 96 mmincluding provision of PTs and selector switch ofproper ratio size andmaking connection with copper conductor cable of suitable size complete all as specified and directed. |
| 90 | S&F in replacement metalic exhaust fan sige 24 inch comprising 3 blades and louvers shutter copper wounded ISI aprooved complete set with all required accessory complete all as specified and directed. |
| 91 | Material and labour for carryout Physical check of fault in DB TP/TPN /LT Panel/ feeder pillar box of any size & capacity, cleaning of burnt/ damage accessories (MCCBs, MCBs, Indicators, meters, selector switches, CTs etc) , replacement of accessories if required, cleaning complete with cleaning material (Petrol/ CRC-226), tightening of all nuts, bolts complete all as specified and directed.Note:-(i) Minor parts like thimbles, GI nuts, bolts, wire for internal wiringetc and cleaning meterials shall be included in quoted rates. |
| 92 | M & L for lifting of existing MS pole of size upto 10 mtr and making the arrangments to fix the security light on it complete all as specified and directed.Note: if it is required to cut and chess in existing pit of pole /or any PCC work must be executed by contractor in this quoted rate only .Contractor must visit the site before quoting the rate of this item |
| 93 | Supply and laying XLPE LT cable size 35 sqmm 3.5 core, 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/ fixed to wall/ pole/ laid in floor including taking out old unserviceable existing cables any sizes and necessary connections and suitable size of thimbling complete all as specified and directed. |
| 94 | All as per Item No 93 above but size 35 sqmm 3.5 core complete all as specified and directed. |
| 95 | All as per Item No 93 above but size 50 sqmm 3.5 core complete all as specified and directed. |
| 96 | All as per Item No 93 above but size 70 sqmm 3.5 core complete all as specified and directed. |
| 97 | All as per Item No 93 above but size 95 sqmm 3.5 core complete all as specified and directed. |
| 98 | All as per Item No 93 above but size 120 sqmm 3.5 core complete all as specified and directed. |
| 99 | All as per Item No 93 above but size 150 sqmm 3.5 core complete all as specified and directed. |
| 100 | All as per Item No 93 above but size 185 sqmm 3.5 core complete all as specified and directed. |
| 101 | All as per Item No 93 above but size 240 sqmm 3.5 core complete all as specified and directed. |
| 102 | S & F in replacement of kiosk boxweather proof made out of PVC fire retardant non shock & rust proof one piece moulded SMC base and SMC cover with hinged door, pole mounting type comprising of aluminium busbar TPN of 63 amps with MCB SP 6 Amps of size 300x200x100mm fixed on pole with MS clamps 30x4mm with necessary nuts washer complete all as specified and directed. |
| 103 | Supply and fix in replacement integral LED LANDSCAPE LIGHTING, 40watts, Decorative Post top lamp housing with all accessories complete with lamp complete all as specified and directed. |
| 104 | S&F in repair security light fitting 45 W with aluminium pdc to maintainable clear toughened glass suitable high efficient secondary lence LM80 certified LEDwith 50000 hr @ L70 complete all as specified and directed. |
| 105 | S&F in replacment earth continuity conductor of size 32 x 6 mm GI strip, fixed on wall/buried in ground with and including fixing arrangements as walls like dash fastener, nuts, bolts, screws, washer etc complete all as specified and directed. |
| 106 | S&F in repair inverter security light fitting 60W . The light should be IP66 ingress protection and IK05 impact resistanceli ion BIS certified battery of 3.7V 10W at battery operation ,back up will be 3-4 hrs, complete all as specified and directed. |
| 107 | Supply, install, testing & commissioning in replacmentof factory made (CPRI test certified manufacturer) LT feeder pillar box of minimum size 150cm x 150 cm x 45 cm, indoor type, floor mounted, cubical compartmentalized type suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supplysystemall as specified and directed having bus bar chamber with insulated copper bus bars 400 Amps rating installed on porcelain insulators. The panel shall be weather, water, dust and vermin proof,made of 2mm CRCA MS sheet and 40x40x6mm angle iron frame work duly powder coated finish. Front & back opening type with aprons for cable entry with double door and locking arrangement with MS door bolts including provision of 02 Nos 65mm Godrej (freedom) lock with 2 keys including internal wiring with PVC insulated multistranded copper conductor FRLS cables of suitable sizegrouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland. The scope of theworkalsoincludessupplyandfixingthe following :-INCOMING(a) MCCB 200 Amps, 36 KA rupturing capacity 4 pole, 415 Volts, 50 Hz AC adjustable type - 01 Nos(b) Volt meter digital type 0-500 Voltswith 3 way rotary selector switch -01 Nos(c) Ammeterdigital type 0-300 Amps with 3 way rotary selector switch and 3 Nos CTs of ratio 400/5 amps class-l. - 01 Nos(d) Indicating lamps industrial (LED type) RYB - 01 Set of three(e) Space for MCCB any Cap-02 NosOUTGOING(b)MCCB 100 Amps, 25 KA rupturing capacity 3 pole, 415volts, 50Hz- 03 Nos |
| 108 | Labour for checking and attending complaints of ACs,Refrigetors and water coolersetc of any capacity, rectification of minor defects and make the equipment functional complete all as specified and directed.(any parts required forreplacementshall be measured and paid separately under respective items)Note:- (a)The contractor should detail minimum one AC Mechanic & one helper to attend complaints (b)The complaint should be attended on same day with in 3 hours .(c))If the complaint not attended/not completed on same daywith in threehours recovery will be done as follows:-(i) For first day Rs.300/-(ii)For second day Rs.500/-(iii)For nextevery day Rs.700/- |
| 109 | M&L for Servicing of split type/ Cassette type AC / deep fridger upto 4 Ton capacity ofany make / model by taking out the AC, Cleaning of evaporating coil, condensing coil with water & brush to remove dust including cleaning of filter, greasing oiling of fan motor and checkingof electric circuit for smooth functioning of AC complete all as specified and directed. |
| 110 | Supply only against repairs running capacitor combination(50 mfd + 6 ) / (50+4) mfd 230 Voltfor AC upto 4.00 Ton complete all as specified and directed. |
| 111 | Supply & charging gas refrigerant suitable forSplittype AC up to 2 Ton capacity including removing of leakage if any and testing complete all as specified & directed by Engineer-in-charge |
| 112 | Supply onlyin replacementof starting relay suitable for 1.5/2 Ton capacity AC complete all as specified and directed. |
| 113 | Supply onlyin replacementof over load protector suitable for 1.5 Ton capacity AC complete all as specified and directed. |
| 114 | Supply onlyin replacementof thermostat switch suitable for 1.5/2 Ton capacity AC complete all as specified and directed. |
| 115 | Supply and fixingin replacementof reciprocating /Rotary type compressor suitable for upto 4 Ton capacity split type AC/ Cassette type AC/ deep fridger of the same make and model as per existing make of ACs, refixing including brazing work etc, pressuretesting & establishing vacuum for dehydration complete all as specified and directed. |
| 116 | Supply onlyin replacement of wiring kit suitable for 1.5/2 Ton capacity AC complete all as specified and directed. |
| 117 | Supply only in replacement of air filter synthetic/ nylon as per existing size and shape suitable for 1.5/2 Ton capacity split type Acs complete all as specified and directed. |
| 118 | S&F in replacmentof MS stand of any type required as per site (wall/chauki stand) for mounting outdoor of spit AC complete all as specified and directed. |
| 119 | Supply only in replacementof new DC fan motor (inoor/outoor) 1/4,1/5 HP single/double shaftas per existing model sutaible for Splittype ACs 1.5/2 Ton complete all as specified and directed. |
| 120 | Supply onlyin replacement of evaporatingair blower made out of suitable for upto 2 Ton capacity for split type AC complete all as specified and directed. |
| 121 | Supply only ofcopper tubing heavy duty inner dia 6 mm (1/4\") for refrigerant for Acs including insulation of good qualitycomplete all as specified and directed.Make-Mandev/Mandley/ Uniflow |
| 122 | Supply only of copper tubing heavy duty inner dia 9 mm (3/8\") for refrigerant for Acs including insulation of good quality complete all as specified and directed. |
| 123 | Supply and fixingin replacement of indoorunit kit suitable for split type AC 1.5/2 Ton withPCB complete withsensor complete with fixing plate suitable to non inverter type AC complete all as specified and directed. |
| 124 | M&L for Servicing and gas chargingof Refrigerator 265ltr capacity including cleaning of parts, replacment of minor parts if required ,replacement of filters, leakage testing complette all as specified and directed. |
| 125 | S&F in replacementof compresor of 265 ltr refrigerator complete with required accessories and make as per sample complete all as specified and directed. |
| 126 | Supply and fixing in replacement of split type AC 1.5/2 Ton outdoor unit kit complete with compressor,condensor coil,condensor fan with blade and sensor suitable to non inverter typeexisting model and make AC complete all as specified and directed. |
| 127 | M&L for Servicing and gas charging of Water cooler cap 80ltr including cleaning of parts, replacment of minor parts if required ,replacement of filters, leakage testing complete all as specified and directed. |
| 128 | S&F in replacement of compresor of 80 ltr water cooler complette with required accessories and make as per sample complete all as specified and directed. |
| 129 | S&F in replacement of voltage stabliger variation 170 to 250 volt cap 2KVA completet set and make as per sample complete all as specified and directed. |
| 130 | S&F in replacement of voltage stablizer cap 5 kVA suitable for AC 1.5/2 Ton , variation of input 140 to 300 volts and output from 215 to 240 volts completet set ,make as per sample complete all as specified and directed. |
| 131 | S&F in repair desert cooler steel body 60 ltr capacity complete set with pump motor ,fan motor ,blades all as specified and directed ,icluding MS stand to mount the cooler (required to maintane the temperature inside the substation equiped transformer ) complete all as specified and directed. |
| 132 | S & F in replacement remote suitable for split AC 1.5/2.0 Ton ,as per sample complete all as specified and directed. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail