Tender For Repair To Joinery Of Otm Accommodation Of Rekhamari, Rocket, Sata, Lt And Med Regt Under Ge Missamari.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jul 2024
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
missamari → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Joinery Of Otm Accommodation Of Rekhamari, Rocket, Sata, Lt And Med Regt Under Ge Missamari.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2024 | DATE CORRIGENDUM | Date | 11-Jul-2024 |
| 2 | 29-Jun-2024 | BOQ CORRIGENDUM | BOQ | 11-Jul-2024 |
| 3 | 11-Jul-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Jul-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed. |
| 2 | Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 3 | S&F 2nd class hard wood plain solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 4 | S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 5 | S&F 25mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 6 | S&F 35 mm thick factory made,2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed. |
| 7 | S&Fmild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sandingcomplete all as specified and as directed. |
| 8 | M&L providing plain cementconcrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fastincluding necessary form work as required complete all as specified and directed. |
| 9 | M&L preparing surface of wood and wood based materials, and new or old of any description and girth,not otherwise described and treated with applying two coats of creosote oil,complete all as specified and as directed. |
| 10 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 11 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heatmoulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail;Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 12 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. Note:-(i)Glass/wire guage/Particle board as required shall be measured and paid seperately under appropiate item(ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 13 | S&F Powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) window andventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specifiedNote:-(i)Glass/wire guage/Particle board as required shall be measured and paid seperately under appropiate item(ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 14 | Supply foranodised aluminiumthree track sliding windowand ventilator frame side/top/shutters (weight of section not less that 0.55 Kg/RM) aluminium section withoutsash baraluminiumsection including all necessary joining cleats,hold fast, rubber gasket anodised snap beading, anodisedaluminiumfittings, suitable alum handle and locking arrangement etc, two track for glass and one track for aluminium wire mess etc, including powder coated of any colour (thick of power coating not less than 50 micron) & providing AC hole complete all as specified and directed.. Note:- (i) Wire cloth /glass shall be measured and paid separately under appropiate items. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 15 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 16 | S&F 4mm thick plain sheet glass,ordinary quality fixed with Aluminum frame work not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 17 | S&F 4mm thick plain sheet glass, frosted on one side, ordinary quality fixed with Aluminum frame worknot exc 0.5 sqm in each pane complete all as specified and as directed. |
| 18 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 19 | S&Fin repair, 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed toAluminum frame work/Cupboard complete all as specified and as directed. |
| 20 | S&F 30mm (Width of flaps open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 21 | S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 22 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified anddirected . |
| 23 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 24 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 25 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 26 | S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 27 | M&L premimum quality Non - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6,for laying floor finishes, including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed. |
| 28 | M&L Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, including dismantling wall tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed. |
| 29 | M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6,for laying floor finishes, including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed. |
| 30 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed. |
| 31 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in cement mortar 1:6 including Demolition of brick work masonry, built in cement mortar and removing debries of the site complete all as specified and directed. |
| 32 | M&L forrendering 20mm thick with cement mortar 1:4on fair faces of brick workin two layers (10mm and 10mm) sperately mixed with water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and faircomplete all as specified and directed. Note:- WPC shall be measured & paid separately |
| 33 | M&L for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 34 | M&L for Rendering 15 mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed. |
| 35 | M&L for preparation of new wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specificationover new surface over 1 mm thick wall care putty,complete all as specified and directed. |
| 36 | Supply only integral Water proofing compund, complete all as specified and directed. |
| 37 | M&Lpreparation of new steel surfaces of any description over 10cm width or girth and applyingtwo coats of synthetic enamel paint complete all as specified and directed. |
| 38 | M&L Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint overone coat of pink primer,complete all as specified and directed. |
| 39 | M&L preperation of old surfaces of ceilings and applying one coat of white wash,complete all as specified and as directed |
| 40 | M&L for complete removal of existing finishes,preparation of old wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 41 | M&L for complete removal of existing finishes preparation of old wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification over new surface over 1 mm thick wall care putty,complete all as specified and directed. |
| 42 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 43 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 44 | S&F in repair, Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longincluding 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws all as specified complete complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Jul 11, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 18, 2024
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender