|
| 1 | S&F in repair of booster pump with vessel of capacity 1 HPwith all accessories including water seal complete all as specified and directed by Eng-in-Charge |
| 2 | Repair and replacement of auto voltage regulator completewith wire connection and connecting to existing field coil 24 volts for capacity of 125 to 600 KVAcomplete all as specified and directed by Engr-in- Charge. |
| 3 | S & F low engine oil pressure switch/sensor for 12/24 volts 3.5 to 10 Kg/Sq cm for DG sets of capacity 62.5 KVA to 600 KVA complete all as specified and directed by Engr-in- Charge. |
| 4 | S&F in replacement lead acid power pack unit of capacity 12 volts 180 AH of DG Sets complete all as specified and diected by Engr-in- Charge |
| 5 | Supply and fixing in repair of Turbo Charger Assy of DG set of capacity 320 KVA to 600 KVA incl taking down old u/s Turbo Charger complete all as specified by Engr-in- Charge |
| 6 | S&F in repairscable jointing kit for 11 KV (Earthed) grade cable for out door termination heat shrinkable type joint complet with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120to 185 Sqmm all as specified and directed. |
| 7 | S&F in repairscable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrinkable type joint complet with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120to 185 Sqmm all as specified and directed by Engr-in- Charge |
| 8 | S & F inrepair automatic star delta starter 415 V 3 phase suitable for 12.5 HP motor all as specified and directed by Engr-in- Charge |
| 9 | M & L for changing the locking arrangement and refixing the doors of LT panels by welding and painting the outer and inner surface of panel complete all as specified and directed |
| 10 | Disconnecting from circuit/bus bar LT panel and taking out cables for extension of loop/passing through pipe reconnection with circuit and tightening of connections by using suitable size of lugs/thimbles complete all as specified and directed |
| 11 | S&F in replacement of existing unserviceable onload changeover switchany size & capacity with onload changeover switch 4 pole 630 Amps side handle operated along with SS enclosure including minor addition/alternation as required at site for fixing and connecting the changeover switch all as directed by Engr-in-Charge. |
| 12 | S&F in replacement ofexisting unserviceable MCCB any size/capacity with MCCB 4 pole,415 Volt , adjutable type, 630 Amps breaking capacity 50KA Thermal magnetic and Microprocessor release with thermal magnetic setting type incl providing suitablethimbles/extended terminal with nuts,bolts and washers etc. all as directed by Engr-in-Charge. |
| 13 | S&F in replacement ofexisting unserviceable MCCB any size/capacity with MCCB 4 pole,415 Volt , adjutable type, 400 Amps breaking capacity 36KA Thermal magnetic and Microprocessor release with thermal magnetic setting type incl providing suitablethimbles/extended terminal with nuts,bolts and washers etc. all as directed by Engr-in-Charge. |
| 14 | S&F in replacement ofexisting unserviceable MCCB any size/capacity with MCCB 4 pole 415 Volt , adjutable type, 250 Ampsbreaking capacity 36KA Thermal magnetic setting type incl providing suitablethimbles/extended terminal with nuts,bolts and washers etc. all as directed by Engr-in-Charge |
| 15 | S&F in replacement ofexisting unserviceable MCCB any size/capacity with MCCB 4 pole415 Volt , adjutable type, 200 Amps breaking capacity 36 KA Thermal magnetic setting type incl providing suitablethimbles/extended terminal with nuts,bolts and washers etc. all as directed by Engr-in-Charge. |
| 16 | S&F in replacement ofexisting unserviceable MCCB any size/capacity with MCCB 4 pole 125 Amps 16KA Thermal magnetic setting type incl providing suitablethimbles/extended terminal with nuts,bolts and washers etc. all as directed by Engr-in-Charge. |
| 17 | S&F in replacement ofexisting unserviceable MCCB any size/capacity with MCCB 4 pole 63 Amps 16KA Thermal magnetic setting type incl providing suitablethimbles/extended terminal with nuts,bolts and washers etc. all as directed by Engr-in-Charge. |
| 18 | Supply & Fixing in repair VCB battery charger 415 V ripple free DC output capacity 20 AH to 180 AH max charging current 15 A suitable for charging series connected dry cell cap 12V amp 20 AH to 150 AH complete all as specified |
| 19 | Supply & Fixing 12 V 80-100 AH dry rechargeable maintenance free battery suitable for VCB power pack complete all as specified |
| 20 | Supply & Fixing in repair sheet metal Enclosures DB\"s single pole and neutral Single door of 2 ways with 200 Amp rated bus bar complete all as specified |
| 21 | Supply & Fixing sheet metal Enclosures DB\"s single pole and neutral double door of 8 ways with 200 Amp rated bus bar complete all as specified |
| 22 | Supply & Fixing sheet metal Enclosures DB\"s single pole and neutral double door of 12 ways with 200 Amp rated bus bar complete all as specified |
| 23 | Supply and fixing in repair LT line separator suitable for three phase four wire water proof, weather proof, shock proof, Resistant to chemicals , robust construction easy to install low maintenance and fine uniform finish all as directed by Engr-in-charge. |
| 24 | Deduct Credit for Demolished/Dismantled material Rs (-) 34,762.00 (Minus) as listed in Schedule \"A\" Sec-II (Credit Schedule)Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the \"Contract Sum\". |
