|
| 1 | Description of items and specification ofwork to be excuted. |
| 2 | Making the area workable by uprooting of rank vegetation, grass, brush wood, and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Demolishing stone rubble masonry in lime mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 100 metres lead as per direction of Engineer-in-charge |
| 4 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 100 m. All kind of soil |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 100 m and lift upto 1.5 m etc complete as per directions provided by engineer-in-charge. |
| 6 | Levelling & dressing the undulated area by cutting/digging the surplus earth & Spreading the low laying area by compacting with water & disposal of Surplus earth/ boulder out side the working area lead up to 100 mtr by head load etc complete. |
| 7 | Providing and laying cement concrete 1:3:6 (1cement : 3 coarse sand (with less than 8% clay content) : 6stone aggregate of 20 mm nominal size) in foundation including ramming compacting and curing etc complete. |
| 8 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand (with less than 8% clay content)) etc complete. |
| 9 | Random rubble masonry with cement mortar 1:6 (1 cement : 6 coarse sand (with less than 8% clay content))in superstructure above plinth level and upto floor five level,including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand (with less than 8% clay content): 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level etc complete. |
| 10 | Dry stone pitching / soling 22.5 cm thick including supply of stones and preparing surface etc complete. |
| 11 | Providing and laying 230 mm thick Brick masonary in1:6 cement mortar (1 cement : 6 coarse sand (with less than 8% clay content))in foundation and plinth level including curing etc complete. |
| 12 | Providing and laying 230 mm thick Brick masonary in1:6 cement mortar (1 cement : 6 coarse sand (with less than 8% clay content))in super structure above plinth level including curing etc complete. |
| 13 | Half brick masonry in cement mortar 1:3 (1 cement :3 coarse sand (with less than 8% clay content)) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level etc complete. |
| 14 | 20mm thick Plaster on internal surface on walls in cement sand mortar 1:4 (1 cement : 4 coarse sand (with less than 8% clay content)) including racking of joint, curing etc complete fine finish. |
| 15 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (with less than 8% clay content): 3 graded stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement up to plinth level etc comlpete. |
| 16 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (with less than 8% clay content): 3 graded stone aggregate 20 mm nominal size) in beams, suspended floors, roofschajjas, lintels, bands, plain above plinth level excluding the cost of centering, shuttering, finishing and reinforcement etc comlpete. |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars |
| 18 | Form work of centering and shuttering including strutting, propping etc and removal of form for roof height of 3 mtr height including labour and material etc complete.Plinth beam and lintel beam |
| 19 | Form work of centering and shuttering including strutting, propping etc and removal of form for roof height of 3 mtr height including labour and material etc complete. |
| 20 | 25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand (with less than 8% clay content)) etc complete. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand (with less than 8% clay content)) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 22 | Providing and fixing 18 mm thick black granite stone slab gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand (with less than 8% clay content)), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeat all levels (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 23 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand (with less than 8% clay content)) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand (with less than 8% clay content)) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand (with less than 8% clay content)) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed with avg. thickness of 120mm and minimum thickness at khurra as 65mm. |
| 24 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand (with less than 8% clay content): 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 25 | Flush/ Ruled pointing of outer side of toilet block on stone work with cement mortar 1:3 (1 cement : 3 fine sand) etc complete. |
| 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Interior Finishing: Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including water thinnable priming coat with cement primer (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 28 | Exterior Finishing: Finishing walls with Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 29 | Providing and fixing double paitam stone fame/chowkhat for door/window of approved quality fixed in position with cement sand mortar 1:4 (1 Cement : 4 Coarse Sand (with less than 8% clay content)and size 100x75mm |
| 30 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 32 | Providing and fixing Aluminium Barfi shaped wire mesh 6mm thick for aluminium frame of window and ventilator etc complete. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 33 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-chargeWith float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 34 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand (with less than 8% clay content)) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (with less than 8% clay content): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (with less than 8% clay content): 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand (with less than 8% clay content)) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand (with less than 8% clay content): 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 35 | Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand (with less than 8% clay content): 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 36 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter |
| 37 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (make Ashirwad) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110mm bend |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (make Ashirwad) , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm nominal dia Pipes |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(make Ashirwad) , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal dia Pipes |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(make Ashirwad) , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls 32 mm nominal dia Pipes |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (make Ashirwad) , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls 25 mm nominal dia Pipes |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making goo etc complete as pr directions given by engineer-in-charge. |
| 43 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system (make cera), including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 44 | Providing and fixing 8 mm dia C.P. / S.S. Jet (make cera) with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 45 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) (make cera) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 46 | Providing & fixing white vitreous china water less urinal (make cera) of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 48 | Providing and fixing ball valve (brass)(make cera) of approved quality, High or low pressure, with plastic floats complete with 25mm nominal bore. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 50 | Providing and fixing C.P. brass bib cock(make cera) of approved quality conforming to IS:8931 : 15 mm nominal bore (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 51 | Providing and fixing C.P. brass stop cock(make cera) (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 52 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 53 | Providing and fixing C.P. Brass extension nipple of approved make and quality as per direction of Engineer-in-charge. |
| 54 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 55 | Providing and fixing toilet paper holder : C.P. Brass (Contractor shall first get the sample approved from Jaipur Circle Office before the execution of work) |
| 56 | Providing and fixing of following electrical articles for providing electricity in the Toilet Block. PVC insulated 6mm single core flexible copper wires & cables polycab / crompton / havells |
| 57 | PVC insulated 2.5mm single core flexible copper wires & cables polycab / crompton / havells |
| 58 | PVC insulated 1.5mm single core flexible copper wires & cables polycab / crompton / havells |
| 59 | PVC insulated 1.00mm single core flexible copper wires & cables polycab / crompton / havells |
| 60 | PVC insulated 0.75mm single core flexible copper wires & cables polycab / crompton / havells (for earthing) |
| 61 | Fan Clip for ceiling |
| 62 | 4 Way TPN MCB Box (Havells) |
| 63 | P.G. Junction |
| 64 | 2M Flush Metal Box |
| 65 | 2M Cover Plate (Havells) |
| 66 | 6M Flush Metal Box |
| 67 | 6M Cover Plate (Havells) |
| 68 | 12M Flush Metal Box |
| 69 | 12M Cover Plate (Havells) |
| 70 | Havells 5 Step Fan Regulator - 2 Module |
| 71 | Havells 6A five pin socket |
| 72 | Havells 6A One way switch |
| 73 | Havells 6A-16A three pin combined shutter socket |
| 74 | Havells 16A one way switch with indicator |
| 75 | Havells DHMGCDPF032 PVC Plastic 32A MCB DPC Curve |
| 76 | Havells 32A Single Pole MCB, Multi Standard (HA-SPMCB32) |
| 77 | Jaset Innovations Chipboard Screw with SAW Thread and Nylon Wood Dowel – White Zinc Plated – Flat Pozidriv Counter Sunk Head – Assorted Small Sizes – Pack of 258 pcs |
| 78 | Polycarbonate bulb holder for wall |
| 79 | Exhaust Fan 200mm (Havells) |
| 80 | LED Light 15W |
| 81 | 3 Blade Fan (Havells) |
| 82 | Submersible Motor 2 H.P. (Crompton) |
| 83 | Labour Charges |
| 84 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. |
