Law and Justice Local Bodies Closing in 0 days TDR #43700239

Tender For Construction Of Awc At Chhoto Natabari, Gosanimari-Ii G.P. No-19329060213

Issued by Local Bodies · dinhata, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Jun 2024
0 days left
EMD
26005
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
dinhata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Construction Of Awc At Chhoto Natabari, Gosanimari-Ii G.P. No-19329060213

BOQ

Name of Work: Construction of AWC atMasanpath Himghar no-19329050113
Sl. No. Item Description
1Earth work in excavation of foundation trenches or drain in all sorts of soils (including mixed soil but excluding laterite or sand stone) including removing spreading ro stacking the spoils within a lead of 75 m, as directed including trimming the side of trenches, levelling dressing an raming the bottom, bailing out water etc. as required complete.
2Earth Work in filling of foundation trenches of plinth with good earth in layers not exceeding 15cmm including watering ramming etc.layer by layer complete ( payment to be made on the basis of measurement of finished quantity work) (a)With earth obtained from excavation of foundation
3C) (ii) With carried earth arranged by the contractor within a radius of of 3 km. including cost of carried earth.
4Single brick flat soling of picked jhama brick including ramming and dressing bed to proper leveling and filling joints with local sand
5Cement concrete with 30 mm down graded shigles excluding shuttering.
6Ordinary Cement concrete (M-20) with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In ground floor as per relevant IS codes.
7In 1st Floor
8Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction
9In 1st Floor
10Hire and labour charge for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slab, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto the roof of ground floor)
11Above PL
12In first floor
13Brick work with 1st class bricks in cement morter (1:6)
1425 mm th damp prrof course with cement concrete with stone chips (1:1.5:3) (with graded stone aggregate 10 mm nominal size) and admixture of water proofing compound as per manufactures specification followed by two coat of polymer based paint, ( 1st coat after 4 to 5 days of concrete laying and 2nd coat just before brick masonry work) as directed ( cost of water proofing compound & polymer based paint to be paid seperately) ( Chequering not required over concrete or painted surface)
15125 thick brick work with 1st class bricks in cement morter (1:4) in ground floor
16In 1st Floor
17Wood work for door for door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of frame excluding cost of concrete, Iron butt hinges and M.S. clamps. ( the quantam should be corrected up to three decimals)
18Z batten shutter for door and window as per design having tongued and groove half lap jointed as per direction in the Eng-in charge including fitting and fixing shutterin position but excluding the cost of hinges and other fittings in G Floor.
19Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction
20Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987.
21Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing workin floor
22Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing workin wall
23Suppplying and laying chequered tiles of any shade & of approved quality with
24Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC
25Providing & fixing factory made 30 mm thick factory made solid pvc door
26Plaster (to wall, floor, ceiling etc) with sand - cement-morter including rounding off and chamfering corners as directed and racking outjoints including throating, noising and drip course, scaffolding / staging where necessary ( Ground floor) (excluding cost of chipping over concrete surface ) 15 mm th 1:6
27In 1st Floor
2820 mm th 1:6
29In 1st Floor
3010 mm th 1 :4
31Neat cement plunning about 1.5mm thick in wall dado, window sills, floors, drains etc. using cement @ .152 cu m/100 sq m
32Supplying fitting fixing M.S. Clamps for door and window frames made of flat bent bar, end bifurcated with necessary screws etc. bycement concrete (1:2:4) as per direction (cost of concrete will be paid seperately)(a) 40mm x 6mm flat - 250mm long
33Iron butt hinges fitted and fixed with new scres. For door
34Iron butt hinges fitted and fixed with new scres. For window
35Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bold and round fittingc) 300mm long
36Iron Socketbolt fitted and fixed complete forr door
37Iron Socketbolt fitted and fixed complete forr window
38a) MS or WI ornamental Grill of approved design joints continiously welded with M.S. W.I flats and bars for windows , railing etc. fitted & fixed necessary screws and lugs complete.
39a) Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. on wooden surface
40a) Primer one Coat on steel surface
41A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary.
42A) Painting 2 coat on steel surface
43Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical
44Applying Decorative Cement Base Paint, 2 coat
45Construction of septic tank of different capacities as per approved drawing with 1stclass brick work in cement mortar (1:4)
46Construction of circular soak well 2.5 metre deep in all types of sandy soils
47Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm
48Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of pproved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).
49Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg
50Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992single socketed 3m length
51Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
52Labour for hoisting plastic water storage tank.
53Labour for lowering plastic water storage tank and stacking in places asdirected.
54Labour for punching hole in plastic water storage tank upto 50 mm dia.
55Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make
56For Concealed work
57Supplying, fitting and fixing Chromium plated angular Stop Cock
58Supplying, fitting and fixing Chromium plated Stop Cock
59Supplying, fitting and fixing Chromium plated Bib Cock
60Supplying, fitting and fixing 10 litre P.V.C. low-down cistern
61Supplying, fitting and fixing stainless steel sink complete with wastefittings and two coats of painting of C.I. brackets.
62Supplying, fitting and fixing pillar cock of approved make.
63Supplying, fitting and fixing Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
64Labour for fitting and fixing U.P.V.C. pipes for above ground work
65Supplying, fitting & fixing approved patent vent cowl I.C.I.
66Chromium plated Hand shower 70mm dia Round Shape Single flow
67Supplying, fitting and fixing urinal flush pipe fittings of approved brand
68Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick
69Supplying, fitting and fixing towel rail with two brackets.
70Supplying, fitting and fixing porcelain soap tray of approved make.
71Labour for boring tube well of required dia . By Water Jet System though any type of soil strata -----------------------------tube well pipe and the bore.
72Supplying G.I. Pipes of TATA make including necessary sockets.
73Supplying G.I. Pipe strainer with brass net & jacketted of approved quality ( Heavy Type )
74Supplying of G.I. reducing socket with I.S.I. mark.
75Supplying fitting fixing plug of approved make conforming to I.S. specification.
76Supplying Fitting fixing Check valve (vertical) G.M. tested to 21 kg per sq.cm.
77Electrification with connection of WBSEDCL
78GST-18%
79Labour Cess-1%

AI Tender Summary

OUR REF NO 43700239
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 25-06-2024
Authority
Authority Name District Magistrate
Work Description Tender For Construction Of Awc At Chhoto Natabari, Gosanimari-Ii G.P. No-19329060213
Basic Detail
Tender No Din-I /BDO/04 /23-24 (4th call)
Bidding Type Tender
Location
City dinhata
State West Bengal
Key Dates
Publish Date 14 Jun 2024
Submission Date 25 Jun 2024
Open Date 27 Jun 2024
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 26005
Exemption Not Available
Document List
155b0971-2e56-4404-aec1-bbc9735450ed.html
BOQ_1510705.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 14, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 25, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 27, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

155b0971-2e56-4404-aec1-bbc9735450ed.html

xls

BOQ_1510705.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders